[PATCH] include/linux: Fix misspellings in comments.

From: Adam Buchbinder
Date: Tue Feb 23 2016 - 20:45:15 EST

Signed-off-by: Adam Buchbinder <adam.buchbinder@xxxxxxxxx>
---
include/linux/amba/mmci.h | 2 +-
include/linux/bio.h | 2 +-
include/linux/bpf.h | 2 +-
include/linux/cgroup-defs.h | 2 +-
include/linux/clk/ti.h | 2 +-
include/linux/cpufreq.h | 2 +-
include/linux/dma-buf.h | 2 +-
include/linux/edac.h | 2 +-
include/linux/fb.h | 6 +++---
include/linux/fsl_ifc.h | 2 +-
include/linux/hid-sensor-hub.h | 2 +-
include/linux/hyperv.h | 2 +-
include/linux/iommu.h | 2 +-
include/linux/ipack.h | 4 ++--
include/linux/irqchip.h | 4 ++--
include/linux/isdnif.h | 4 ++--
include/linux/kgdb.h | 8 ++++----
include/linux/mfd/abx500.h | 2 +-
include/linux/mfd/abx500/ab8500-bm.h | 4 ++--
include/linux/mfd/cros_ec_commands.h | 2 +-
include/linux/mfd/ipaq-micro.h | 2 +-
include/linux/mfd/palmas.h | 2 +-
include/linux/mfd/wm8994/pdata.h | 2 +-
include/linux/mmc/card.h | 2 +-
include/linux/msi.h | 2 +-
include/linux/mtd/spi-nor.h | 2 +-
include/linux/netdevice.h | 2 +-
include/linux/of.h | 8 ++++----
include/linux/pci.h | 2 +-
include/linux/perf_event.h | 2 +-
include/linux/platform_data/ata-samsung_cf.h | 2 +-
include/linux/platform_data/dma-ste-dma40.h | 2 +-
include/linux/platform_data/usb-mx2.h | 6 +++---
include/linux/power/smartreflex.h | 2 +-
include/linux/regmap.h | 2 +-
include/linux/shrinker.h | 2 +-
include/linux/skbuff.h | 2 +-
include/linux/srcu.h | 2 +-
include/linux/sunrpc/cache.h | 2 +-
include/linux/sunrpc/svc.h | 2 +-
include/linux/tty_ldisc.h | 16 ++++++++--------
include/linux/usb/otg-fsm.h | 4 ++--
include/linux/vgaarb.h | 2 +-
include/linux/vmalloc.h | 2 +-
44 files changed, 66 insertions(+), 66 deletions(-)

diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 8c98113..469f598 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -12,7 +12,7 @@
* @ocr_mask: available voltages on the 4 pins from the block, this
* is ignored if a regulator is used, see the MMC_VDD_* masks in
* mmc/host.h
- * @ios_handler: a callback function to act on specfic ios changes,
+ * @ios_handler: a callback function to act on specific ios changes,
* used for example to control a levelshifter
* mask into a value to be binary (or set some other custom bits
* in MMCIPWR) or:ed and written into the MMCIPWR register of the
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 5349e68..b9ca77b 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -13,7 +13,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public Licens
+ * You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
*/
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 83d1926..95cce64 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -13,7 +13,7 @@

struct bpf_map;

-/* map is generic key/value storage optionally accesible by eBPF programs */
+/* map is generic key/value storage optionally accessible by eBPF programs */
struct bpf_map_ops {
/* funcs callable from userspace (via syscall) */
struct bpf_map *(*map_alloc)(union bpf_attr *attr);
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 789471d..24ca41a 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -549,7 +549,7 @@ static inline void cgroup_threadgroup_change_end(struct task_struct *tsk) {}
* sock_cgroup_data overloads (prioidx, classid) and the cgroup pointer.
* On boot, sock_cgroup_data records the cgroup that the sock was created
* in so that cgroup2 matches can be made; however, once either net_prio or
- * net_cls starts being used, the area is overriden to carry prioidx and/or
+ * net_cls starts being used, the area is overridden to carry prioidx and/or
* classid. The two modes are distinguished by whether the lowest bit is
* set. Clear bit indicates cgroup pointer while set bit prioidx and
* classid.
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 9a63860..4402a34 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -43,7 +43,7 @@
* @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
* @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
* @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg
- * @dcc_rate: rate atleast which DCC @dcc_mask must be set
+ * @dcc_rate: rate at least which DCC @dcc_mask must be set
* @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
* @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
* @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 88a4215..dddc719 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -596,7 +596,7 @@ static inline bool policy_has_boost_freq(struct cpufreq_policy *policy)
return false;
}
#endif
-/* the following funtion is for cpufreq core use only */
+/* the following function is for cpufreq core use only */
struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);

/* the following are really really optional */
diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
index f98bd70..1f9dd98 100644
--- a/include/linux/dma-buf.h
+++ b/include/linux/dma-buf.h
@@ -45,7 +45,7 @@ struct dma_buf_attachment;
* of requesting device.
* @detach: [optional] detach a given device from this buffer.
* @map_dma_buf: returns list of scatter pages allocated, increases usecount
- * of the buffer. Requires atleast one attach to be called
+ * of the buffer. Requires at least one attach to be called
* before. Returned sg list should already be mapped into
* _device_ address space. This call may sleep. May also return
* -EINTR. Should return -EINVAL if attach hasn't been called yet.
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 9e0d789..7b5c7a6 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -178,7 +178,7 @@ static inline char *mc_event_error_type(const unsigned int err_type)
* @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers.
* @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F.
* Those memories are labed as "PC2-" instead of "PC" to
- * differenciate from DDR.
+ * differentiate from DDR.
* @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205
* and JESD206.
* Those memories are accessed per DIMM slot, and not by
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 55433f8..a27b4e0 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -125,7 +125,7 @@ struct fb_cursor_user {

/* The resolution of the passed in fb_info about to change */
#define FB_EVENT_MODE_CHANGE 0x01
-/* The display on this fb_info is beeing suspended, no access to the
+/* The display on this fb_info is being suspended, no access to the
* framebuffer is allowed any more after that call returns
*/
#define FB_EVENT_SUSPEND 0x02
@@ -158,9 +158,9 @@ struct fb_cursor_user {
#define FB_EVENT_FB_UNBIND 0x0E
/* CONSOLE-SPECIFIC: remap all consoles to new fb - for vga_switcheroo */
#define FB_EVENT_REMAP_ALL_CONSOLE 0x0F
-/* A hardware display blank early change occured */
+/* A hardware display blank early change occurred */
#define FB_EARLY_EVENT_BLANK 0x10
-/* A hardware display blank revert early change occured */
+/* A hardware display blank revert early change occurred */
#define FB_R_EARLY_EVENT_BLANK 0x11

struct fb_event {
diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h
index 0023088..3efa74c 100644
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -595,7 +595,7 @@ enum ifc_nand_fir_opcodes {
*/
/* Source ID for error transaction */
#define IFC_NOR_ERATTR0_ERSRCID 0xFF000000
-/* AXI ID for error transation */
+/* AXI ID for error transaction */
#define IFC_NOR_ERATTR0_ERAID 0x000FF000
/* Chip select corresponds to NOR error */
#define IFC_NOR_ERATTR0_ERCS_CS0 0x00000000
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index c02b5ce..38081ff 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -145,7 +145,7 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev,
* @hsdev: Hub device instance.
* @usage_id: Usage id of the client (E.g. 0x200076 for Gyro).
*
-* If there is a callback registred, this call will remove that
+* If there is a callback registered, this call will remove that
* callbacks, so that it will stop data and event notifications.
*/
int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev,
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 753dbad..496120d 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -709,7 +709,7 @@ struct vmbus_channel {
* Support for sub-channels. For high performance devices,
* it will be useful to have multiple sub-channels to support
* a scalable communication infrastructure with the host.
- * The support for sub-channels is implemented as an extention
+ * The support for sub-channels is implemented as an extension
* to the current infrastructure.
* The initial offer is considered the primary channel and this
* offer message will indicate if the host supports sub-channels.
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index a5c539f..1025a59 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -92,7 +92,7 @@ enum iommu_cap {
};

/*
- * Following constraints are specifc to FSL_PAMUV1:
+ * Following constraints are specific to FSL_PAMUV1:
* -aperture must be power of 2, and naturally aligned
* -number of windows must be power of 2, and address space size
* of each window is determined by aperture size / # of windows
diff --git a/include/linux/ipack.h b/include/linux/ipack.h
index 8bddc3f..e75986b 100644
--- a/include/linux/ipack.h
+++ b/include/linux/ipack.h
@@ -92,7 +92,7 @@ struct ipack_region {
*
* Warning: Direct access to mapped memory is possible but the endianness
* is not the same with PCI carrier or VME carrier. The endianness is managed
- * by the carrier board throught bus->ops.
+ * by the carrier board through bus->ops.
*/
struct ipack_device {
unsigned int slot;
@@ -216,7 +216,7 @@ void ipack_driver_unregister(struct ipack_driver *edrv);
* is done by the carrier driver. The carrier should populate the fields
* bus and slot as well as the region array of @dev prior to calling this
* function. The rest of the fields will be allocated and populated
- * during initalization.
+ * during initialization.
*
* Return zero on success or error code on failure.
*
diff --git a/include/linux/irqchip.h b/include/linux/irqchip.h
index 89c34b2..950e4b2 100644
--- a/include/linux/irqchip.h
+++ b/include/linux/irqchip.h
@@ -19,7 +19,7 @@
* the association between their DT compatible string and their
* initialization function.
*
- * @name: name that must be unique accross all IRQCHIP_DECLARE of the
+ * @name: name that must be unique across all IRQCHIP_DECLARE of the
* same file.
* @compstr: compatible string of the irqchip driver
* @fn: initialization function
@@ -30,7 +30,7 @@
* This macro must be used by the different irqchip drivers to declare
* the association between their version and their initialization function.
*
- * @name: name that must be unique accross all IRQCHIP_ACPI_DECLARE of the
+ * @name: name that must be unique across all IRQCHIP_ACPI_DECLARE of the
* same file.
* @subtable: Subtable to be identified in MADT
* @validate: Function to be called on that subtable to check its validity.
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
index 0fc6ff2..0b73bc2 100644
--- a/include/linux/isdnif.h
+++ b/include/linux/isdnif.h
@@ -69,9 +69,9 @@
/* the amount of time the INVOKED process waits for a reaction from */
/* the network. */
/* If a response (either error or result) is received during this */
-/* intervall, a reporting callback is initiated and the process will */
+/* interval, a reporting callback is initiated and the process will */
/* be deleted, the hl identifier will be freed. */
-/* If no response is received during the specified intervall, a error*/
+/* If no response is received during the specified interval, a error */
/* callback is initiated with timeout set to -1 and a datalen set */
/* to 0. */
/* If timeout is set to a value <= 0 during INVOCATION the process is*/
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index e465bb1..598e435 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -104,9 +104,9 @@ extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
*/

/**
- * kgdb_arch_init - Perform any architecture specific initalization.
+ * kgdb_arch_init - Perform any architecture specific initialization.
*
- * This function will handle the initalization of any architecture
+ * This function will handle the initialization of any architecture
* specific callbacks.
*/
extern int kgdb_arch_init(void);
@@ -211,9 +211,9 @@ extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);

/**
- * kgdb_arch_late - Perform any architecture specific initalization.
+ * kgdb_arch_late - Perform any architecture specific initialization.
*
- * This function will handle the late initalization of any
+ * This function will handle the late initialization of any
* architecture specific callbacks. This is an optional function for
* handling things like late initialization of hw breakpoints. The
* default implementation does nothing.
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 552cc1d..44412c9 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -45,7 +45,7 @@ enum abx500_adc_therm {
* struct abx500_res_to_temp - defines one point in a temp to res curve. To
* be used in battery packs that combines the identification resistor with a
* NTC resistor.
- * @temp: battery pack temperature in Celcius
+ * @temp: battery pack temperature in Celsius
* @resist: NTC resistor net total resistance
*/
struct abx500_res_to_temp {
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 12a5b39..e63681e 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -279,7 +279,7 @@ enum bup_vch_sel {
* struct res_to_temp - defines one point in a temp to res curve. To
* be used in battery packs that combines the identification resistor with a
* NTC resistor.
- * @temp: battery pack temperature in Celcius
+ * @temp: battery pack temperature in Celsius
* @resist: NTC resistor net total resistance
*/
struct res_to_temp {
@@ -290,7 +290,7 @@ struct res_to_temp {
/**
* struct batres_vs_temp - defines one point in a temp vs battery internal
* resistance curve.
- * @temp: battery pack temperature in Celcius
+ * @temp: battery pack temperature in Celsius
* @resist: battery internal reistance in mOhm
*/
struct batres_vs_temp {
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 13b630c..4379f29 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -710,7 +710,7 @@ struct ec_response_get_set_value {
uint32_t value;
} __packed;

-/* More than one command can use these structs to get/set paramters. */
+/* More than one command can use these structs to get/set parameters. */
#define EC_CMD_GSV_PAUSE_IN_S5 0x0c


diff --git a/include/linux/mfd/ipaq-micro.h b/include/linux/mfd/ipaq-micro.h
index 5c4d29f..ada54ec 100644
--- a/include/linux/mfd/ipaq-micro.h
+++ b/include/linux/mfd/ipaq-micro.h
@@ -75,7 +75,7 @@ struct ipaq_micro_rxdev {
* @tx_len: length of TX data
* @tx_data: TX data to send
* @rx_len: length of receieved RX data
- * @rx_data: RX data to recieve
+ * @rx_data: RX data to receive
* @ack: a completion that will be completed when RX is complete
* @node: list node if message gets queued
*/
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index c800dbc..e6ac464 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -264,7 +264,7 @@ enum tps65917_regulators {
TPS65917_NUM_REGS,
};

-/* External controll signal name */
+/* External control signal name */
enum {
PALMAS_EXT_CONTROL_ENABLE1 = 0x1,
PALMAS_EXT_CONTROL_ENABLE2 = 0x2,
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 90c6052..f19c04f 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -41,7 +41,7 @@ struct wm8994_ldo_pdata {
* DRC configurations are specified with a label and a set of register
* values to write (the enable bits will be ignored). At runtime an
* enumerated control will be presented for each DRC block allowing
- * the user to choose the configration to use.
+ * the user to choose the configuration to use.
*
* Configurations may be generated by hand or by using the DRC control
* panel provided by the WISCE - see http://www.wolfsonmicro.com/wisce/
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index eb0151b..3afaf81 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -350,7 +350,7 @@ struct mmc_fixup {
unsigned int manfid;
unsigned short oemid;

- /* SDIO-specfic fields. You can use SDIO_ANY_ID here of course */
+ /* SDIO-specific fields. You can use SDIO_ANY_ID here of course */
u16 cis_vendor, cis_device;

void (*vendor_fixup)(struct mmc_card *card, int data);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index a2a0068..c364253 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -143,7 +143,7 @@ static inline void unmask_msi_irq(struct irq_data *data)

/*
* The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
+ * implemented as weak symbols so that they /can/ be overridden by
* architecture specific code if needed.
*/
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 62356d5..77c3c72 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -200,7 +200,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
* @name: the chip type name
* @mode: the read mode supported by the driver
*
- * The drivers can use this fuction to scan the SPI NOR.
+ * The drivers can use this function to scan the SPI NOR.
* In the scanning, it will try to get all the necessary information to
* fill the mtd_info{} and the spi_nor{}.
*
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5440b7b..508e129 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -976,7 +976,7 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev,
* int (*ndo_fdb_del)(struct ndmsg *ndm, struct nlattr *tb[],
* struct net_device *dev,
* const unsigned char *addr, u16 vid)
- * Deletes the FDB entry from dev coresponding to addr.
+ * Deletes the FDB entry from dev corresponding to addr.
* int (*ndo_fdb_dump)(struct sk_buff *skb, struct netlink_callback *cb,
* struct net_device *dev, struct net_device *filter_dev,
* int idx)
diff --git a/include/linux/of.h b/include/linux/of.h
index dc6e396..1885521 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -699,7 +699,7 @@ static inline struct device_node *of_find_matching_node(
* @propname: name of the property to be searched.
*
* Search for a property in a device node and count the number of u8 elements
- * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * in it. Returns number of elements on success, -EINVAL if the property does
* not exist or its length does not match a multiple of u8 and -ENODATA if the
* property does not have a value.
*/
@@ -716,7 +716,7 @@ static inline int of_property_count_u8_elems(const struct device_node *np,
* @propname: name of the property to be searched.
*
* Search for a property in a device node and count the number of u16 elements
- * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * in it. Returns number of elements on success, -EINVAL if the property does
* not exist or its length does not match a multiple of u16 and -ENODATA if the
* property does not have a value.
*/
@@ -733,7 +733,7 @@ static inline int of_property_count_u16_elems(const struct device_node *np,
* @propname: name of the property to be searched.
*
* Search for a property in a device node and count the number of u32 elements
- * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * in it. Returns number of elements on success, -EINVAL if the property does
* not exist or its length does not match a multiple of u32 and -ENODATA if the
* property does not have a value.
*/
@@ -750,7 +750,7 @@ static inline int of_property_count_u32_elems(const struct device_node *np,
* @propname: name of the property to be searched.
*
* Search for a property in a device node and count the number of u64 elements
- * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * in it. Returns number of elements on success, -EINVAL if the property does
* not exist or its length does not match a multiple of u64 and -ENODATA if the
* property does not have a value.
*/
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 27df4a6..1cee82a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -783,7 +783,7 @@ resource_size_t pcibios_align_resource(void *, const struct resource *,
resource_size_t);
void pcibios_update_irq(struct pci_dev *, int irq);

-/* Weak but can be overriden by arch */
+/* Weak but can be overridden by arch */
void pci_fixup_cardbus(struct pci_bus *);

/* Generic PCI functions used internally */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index b35a61a..3501e41 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -133,7 +133,7 @@ struct hw_perf_event {
/*
* Crufty hack to avoid the chicken and egg
* problem hw_breakpoint has with context
- * creation and event initalization.
+ * creation and event initialization.
*/
struct arch_hw_breakpoint info;
struct list_head bp_list;
diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
index 748e716..e78e9b3 100644
--- a/include/linux/platform_data/ata-samsung_cf.h
+++ b/include/linux/platform_data/ata-samsung_cf.h
@@ -22,7 +22,7 @@ struct s3c_ide_platdata {
};

/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * s3c_ide_set_platdata() - Setup the platform specific data for IDE driver.
* @pdata: Platform data for IDE driver.
*/
extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index 1bb9b18..49a7ecd 100644
--- a/include/linux/platform_data/dma-ste-dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -127,7 +127,7 @@ struct stedma40_chan_cfg {
* that are for different reasons not available for the driver.
* @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
* which avoids HW bug that exists in some versions of the controller.
- * SoftLLI introduces relink overhead that could impact performace for
+ * SoftLLI introduces relink overhead that could impact performance for
* certain use cases.
* @num_of_soft_lli_chans: The number of channels that needs to be configured
* to use SoftLLI.
diff --git a/include/linux/platform_data/usb-mx2.h b/include/linux/platform_data/usb-mx2.h
index 22d0b59..ff610f6 100644
--- a/include/linux/platform_data/usb-mx2.h
+++ b/include/linux/platform_data/usb-mx2.h
@@ -24,14 +24,14 @@ enum mx21_usbh_xcvr {
};

struct mx21_usbh_platform_data {
- enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
- enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
+ enum mx21_usbh_xcvr host_xcvr; /* transceiver mode host 1,2 ports */
+ enum mx21_usbh_xcvr otg_xcvr; /* transceiver mode otg (as host) port */
u16 enable_host1:1,
enable_host2:1,
enable_otg_host:1, /* enable "OTG" port (as host) */
host1_xcverless:1, /* traceiverless host1 port */
host1_txenoe:1, /* output enable host1 transmit enable */
- otg_ext_xcvr:1, /* external tranceiver for OTG port */
+ otg_ext_xcvr:1, /* external transceiver for OTG port */
unused:10;
};

diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index d8b187c..2a799b0 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -189,7 +189,7 @@ struct omap_sr {
})

/**
- * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
+ * struct omap_sr_pmic_data - Structure to be populated by pmic code to pass
* pmic specific info to smartreflex driver
*
* @sr_pmic_init: API to initialize smartreflex on the PMIC side.
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 1839434..d2edf15 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -819,7 +819,7 @@ struct regmap_irq {
* @wake_base: Base address for wake enables. If zero unsupported.
* @type_base: Base address for irq type. If zero unsupported.
* @irq_reg_stride: Stride to use for chips where registers are not contiguous.
- * @init_ack_masked: Ack all masked interrupts once during initalization.
+ * @init_ack_masked: Ack all masked interrupts once during initialization.
* @mask_invert: Inverted mask register: cleared bits are masked out.
* @use_ack: Use @ack register even if it is zero.
* @ack_invert: Inverted ack register: cleared bits for ack.
diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h
index 4fcacd9..35823d3 100644
--- a/include/linux/shrinker.h
+++ b/include/linux/shrinker.h
@@ -3,7 +3,7 @@

/*
* This struct is used to pass information from page reclaim to the shrinkers.
- * We consolidate the values for easier extention later.
+ * We consolidate the values for easier extension later.
*
* The 'gfpmask' refers to the allocation we are currently trying to
* fulfil.
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 4ce9ff7..fd6f9e8 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -916,7 +916,7 @@ struct sk_buff_fclones {
*
* Returns true if skb is a fast clone, and its clone is not freed.
* Some drivers call skb_orphan() in their ndo_start_xmit(),
- * so we also check that this didnt happen.
+ * so we also check that this didn't happen.
*/
static inline bool skb_fclone_busy(const struct sock *sk,
const struct sk_buff *skb)
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
index f5f80c5..e4eeefc 100644
--- a/include/linux/srcu.h
+++ b/include/linux/srcu.h
@@ -100,7 +100,7 @@ void process_srcu(struct work_struct *work);

/*
* define and init a srcu struct at build time.
- * dont't call init_srcu_struct() nor cleanup_srcu_struct() on it.
+ * don't call init_srcu_struct() nor cleanup_srcu_struct() on it.
*/
#define __DEFINE_SRCU(name, is_static) \
static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
index ed03c9f..047840e 100644
--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -149,7 +149,7 @@ struct cache_deferred_req {
struct hlist_node hash; /* on hash chain */
struct list_head recent; /* on fifo */
struct cache_head *item; /* cache item we wait on */
- void *owner; /* we might need to discard all defered requests
+ void *owner; /* we might need to discard all deferred requests
* owned by someone */
void (*revisit)(struct cache_deferred_req *req,
int too_many);
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index cc0fc71..a3eb827 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -150,7 +150,7 @@ static inline void svc_get(struct svc_serv *serv)
extern u32 svc_max_payload(const struct svc_rqst *rqstp);

/*
- * RPC Requsts and replies are stored in one or more pages.
+ * RPC Requests and replies are stored in one or more pages.
* We maintain an array of pages for each server thread.
* Requests are copied into these pages as they arrive. Remaining
* pages are available to write the reply into.
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 00c9d68..607d8c3 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -53,11 +53,11 @@
*
* This function is called when the user requests an ioctl which
* is not handled by the tty layer or the low-level tty driver.
- * It is intended for ioctls which affect line discpline
+ * It is intended for ioctls which affect line discipline
* operation. Note that the search order for ioctls is (1) tty
- * layer, (2) tty low-level driver, (3) line discpline. So a
+ * layer, (2) tty low-level driver, (3) line discipline. So a
* low-level driver can "grab" an ioctl request before the line
- * discpline has a chance to see it.
+ * discipline has a chance to see it.
*
* long (*compat_ioctl)(struct tty_struct * tty, struct file * file,
* unsigned int cmd, unsigned long arg);
@@ -66,7 +66,7 @@
*
* void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
*
- * This function notifies the line discpline that a change has
+ * This function notifies the line discipline that a change has
* been made to the termios structure.
*
* int (*poll)(struct tty_struct * tty, struct file * file,
@@ -80,7 +80,7 @@
* char *fp, int count);
*
* This function is called by the low-level tty driver to send
- * characters received by the hardware to the line discpline for
+ * characters received by the hardware to the line discipline for
* processing. <cp> is a pointer to the buffer of input
* character received by the device. <fp> is a pointer to a
* pointer of flag bytes which indicate whether a character was
@@ -90,8 +90,8 @@
* void (*write_wakeup)(struct tty_struct *);
*
* This function is called by the low-level tty driver to signal
- * that line discpline should try to send more characters to the
- * low-level driver for transmission. If the line discpline does
+ * that line discipline should try to send more characters to the
+ * low-level driver for transmission. If the line discipline does
* not have any more data to send, it can just return. If the line
* discipline does have some data to send, please arise a tasklet
* or workqueue to do the real data transfer. Do not send data in
@@ -118,7 +118,7 @@
* char *fp, int count);
*
* This function is called by the low-level tty driver to send
- * characters received by the hardware to the line discpline for
+ * characters received by the hardware to the line discipline for
* processing. <cp> is a pointer to the buffer of input
* character received by the device. <fp> is a pointer to a
* pointer of flag bytes which indicate whether a character was
diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
index f728f18..d013f95 100644
--- a/include/linux/usb/otg-fsm.h
+++ b/include/linux/usb/otg-fsm.h
@@ -78,7 +78,7 @@ struct otg_fsm {
int b_se0_srp;
int b_ssend_srp;
int b_sess_vld;
- /* Auxilary inputs */
+ /* Auxiliary inputs */
int a_sess_vld;
int b_bus_resume;
int b_bus_suspend;
@@ -102,7 +102,7 @@ struct otg_fsm {
int a_bus_req_inf;
int a_clr_err_inf;
int b_bus_req_inf;
- /* Auxilary informative variables */
+ /* Auxiliary informative variables */
int a_suspend_req_inf;

/* Timeout indicator for timers */
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index 8c3b412..47e88e5 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -93,7 +93,7 @@ static inline void vga_set_legacy_decoding(struct pci_dev *pdev,
* VGA forwarding on parent P2P bridges if any).
* This function will block if some conflicting card is already locking
* one of the required resources (or any resource on a different bus
- * segment, since P2P bridges don't differenciate VGA memory and IO
+ * segment, since P2P bridges don't differentiate VGA memory and IO
* afaik). You can indicate whether this blocking should be interruptible
* by a signal (for userland interface) or not.
* Must not be called at interrupt time or in atomic context.
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index d1f1d33..de86cef 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -21,7 +21,7 @@ struct vm_area_struct; /* vma defining user mapping in mm_types.h */

/*
* Maximum alignment for ioremap() regions.
- * Can be overriden by arch-specific value.
+ * Can be overridden by arch-specific value.
*/
#ifndef IOREMAP_MAX_ORDER
#define IOREMAP_MAX_ORDER (7 + PAGE_SHIFT) /* 128 pages */
--
2.7.0.rc3.207.g0ac5344