[PATCH 10/10] staging: rtl8188eu: remove PWR_BASEADDR_* macro definitions and "base" member of wl_pwr_cfg structure
From: Ivan Safonov
Date: Wed Mar 02 2016 - 03:10:21 EST
These macros and "base" member of wl_pwr_cfg structure
are used only to produce debug output.
Signed-off-by: Ivan Safonov <insafonov@xxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/pwrseqcmd.c | 3 +-
drivers/staging/rtl8188eu/include/pwrseq.h | 165 ++++++++++----------------
drivers/staging/rtl8188eu/include/pwrseqcmd.h | 9 --
3 files changed, 63 insertions(+), 114 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
index 99d89f9..b76b0f5 100644
--- a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
+++ b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
@@ -39,11 +39,10 @@ u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers,
RT_TRACE(_module_hal_init_c_, _drv_info_,
("rtl88eu_pwrseqcmdparsing: offset(%#x) cut_msk(%#x)"
- " base(%#x) cmd(%#x)"
+ " cmd(%#x)"
"msk(%#x) value(%#x)\n",
GET_PWR_CFG_OFFSET(pwrcfgcmd),
GET_PWR_CFG_CUT_MASK(pwrcfgcmd),
- GET_PWR_CFG_BASE(pwrcfgcmd),
GET_PWR_CFG_CMD(pwrcfgcmd),
GET_PWR_CFG_MASK(pwrcfgcmd),
GET_PWR_CFG_VALUE(pwrcfgcmd)));
diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h
index 889565e..9dbf843 100644
--- a/drivers/staging/rtl8188eu/include/pwrseq.h
+++ b/drivers/staging/rtl8188eu/include/pwrseq.h
@@ -60,213 +60,172 @@
#define RTL8188E_TRANS_CARDEMU_TO_ACT \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk, value
+ * { offset, cut_msk, cmd, msk, value
* },
* comment here
*/ \
- {0x0006, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
/* wait till 0x04[17] = 1 power ready*/ \
- {0x0002, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \
/* 0x02[1:0] = 0 reset BB*/ \
- {0x0026, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), 0}, \
/* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \
/*0x04[12:11] = 2b'00 disable WL suspend*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
/*0x04[8] = 1 polling until return 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(0), 0}, \
/*wait till 0x04[8] = 0*/ \
- {0x0023, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \
/*LDO normal mode*/
#define RTL8188E_TRANS_ACT_TO_CARDEMU \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk, value
+ * { offset, cut_msk, cmd, msk, value
* },
* comments here
*/ \
- {0x001F, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, \
/*0x1F[7:0] = 0 turn off RF*/ \
- {0x0023, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
/*LDO Sleep mode*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
/*0x04[9] = 1 turn off MAC by HW state machine*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(1), 0}, \
/*wait till 0x04[9] = 0 polling until return 0 to disable*/
#define RTL8188E_TRANS_CARDEMU_TO_SUS \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
/* 0x04[12:11] = 2b'01enable WL suspend */ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, 0xFF, BIT(7)}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, BIT(7)}, \
/* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- {0x0041, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \
/*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
/*Set USB suspend enable local register 0xfe10[4]=1 */
#define RTL8188E_TRANS_SUS_TO_CARDEMU \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \
/*0x04[12:11] = 2b'01enable WL suspend*/
#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0x0026, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/*0x24[23] = 2b'01 schmit trigger */ \
- {0x0005, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
/*0x04[12:11] = 2b'01 enable WL suspend*/ \
- {0x0007, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, 0xFF, 0}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, \
/* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- {0x0041, PWR_CUT_ALL_MSK, PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \
/*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- {0xfe10, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
/*Set USB suspend enable local register 0xfe10[4]=1 */
#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), 0}, \
/*0x04[12:11] = 2b'01enable WL suspend*/
#define RTL8188E_TRANS_CARDEMU_TO_PDN \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0x0006, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), 0}, \
/* 0x04[16] = 0*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
/* 0x04[15] = 1*/
#define RTL8188E_TRANS_PDN_TO_CARDEMU \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0x0005, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), 0}, \
/* 0x04[15] = 0*/
/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
#define RTL8188E_TRANS_ACT_TO_LPS \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0x0522, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
- {0x05F8, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05F9, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05FA, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x05FB, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \
/*Should be zero if no packet is transmitting*/ \
- {0x0002, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), 0}, \
/*CCK and OFDM are disabled,and clock are gated*/ \
- {0x0002, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, \
- PWRSEQ_DELAY_US},/*Delay 1us*/ \
- {0x0100, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
- {0x0101, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/\
- {0x0553, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \
+ /*Delay 1us*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x3F}, \
+ /*Reset MAC TRX*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), 0}, \
+ /*check if removed later*/\
+ {0x0553, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
/*Respond TxOK to scheduler*/
#define RTL8188E_TRANS_LPS_TO_ACT \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0xFE58, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \
- {0x0002, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \
- {0x0008, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x84}, \
+ /*USB RPWM*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, \
+ /*Delay*/ \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \
/* 0x08[4] = 0 switch TSF to 40M */ \
- {0x0109, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(7), 0}, \
/* Polling 0x109[7]=0 TSF in 40M */ \
- {0x0029, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6) | BIT(7), 0}, \
+ {0x0029, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(6) | BIT(7), 0}, \
/* 0x29[7:6] = 2b'00 enable BB clock */ \
- {0x0101, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
/* 0x101[1] = 1 */ \
- {0x0100, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0xFF}, \
/* 0x100[7:0] = 0xFF enable WMAC TRX */ \
{0x0002, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \
+ PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \
/* 0x02[1:0] = 2b'11 enable BB macro */ \
- {0x0522, PWR_CUT_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
+ {0x0522, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
#define RTL8188E_TRANS_END \
/* format
- * { offset, cut_msk, interface_msk, base|cmd, msk,
+ * { offset, cut_msk, cmd, msk,
* value },
* comments here
*/ \
- {0xFFFF, PWR_CUT_ALL_MSK, 0, \
- PWR_CMD_END, 0, 0},
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_CMD_END, 0, 0},
extern struct wl_pwr_cfg rtl8188E_power_on_flow
diff --git a/drivers/staging/rtl8188eu/include/pwrseqcmd.h b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
index 9dd5ce5..468a3fb 100644
--- a/drivers/staging/rtl8188eu/include/pwrseqcmd.h
+++ b/drivers/staging/rtl8188eu/include/pwrseqcmd.h
@@ -29,13 +29,6 @@
#define PWR_CMD_DELAY 0x03
#define PWR_CMD_END 0x04
-/* The value of base: 4 bits */
-/* define the base address of each block */
-#define PWR_BASEADDR_MAC 0x00
-#define PWR_BASEADDR_USB 0x01
-#define PWR_BASEADDR_PCIE 0x02
-#define PWR_BASEADDR_SDIO 0x03
-
/* The value of cut_msk: 8 bits */
#define PWR_CUT_TESTCHIP_MSK BIT(0)
#define PWR_CUT_A_MSK BIT(1)
@@ -56,7 +49,6 @@ enum pwrseq_cmd_delat_unit {
struct wl_pwr_cfg {
u16 offset;
u8 cut_msk;
- u8 base:4;
u8 cmd:4;
u8 msk;
u8 value;
@@ -64,7 +56,6 @@ struct wl_pwr_cfg {
#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
-#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
--
2.4.10