[PATCH 11/17] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

From: Neil Armstrong
Date: Thu Mar 03 2016 - 06:49:30 EST


Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
.../devicetree/bindings/gpio/gpio_oxnas.txt | 27 ++++++
.../bindings/pinctrl/plxtech,pinctrl.txt | 100 +++++++++++++++++++++
2 files changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
new file mode 100644
index 0000000..0ef6c55
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
@@ -0,0 +1,27 @@
+PLX Technology OXNAS SoC GPIO Controller
+==========================================
+
+Required properties:
+- compatible: "plxtech,nas782x-gpio".
+- reg: Should contain GPIO controller registers location and length
+- interrupts: Should be the port interrupt shared by all the pins.
+- #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify optional parameters (currently
+ unused).
+- gpio-controller: Marks the device node as a GPIO controller.
+
+optional properties:
+- #gpio-lines: Number of gpio if absent 32.
+
+
+Example:
+ gpio0: gpio@000000 {
+ compatible = "plxtech,nas782x-gpio";
+ reg = <0x000000 0x100000>;
+ interrupts = <21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #gpio-lines = <32>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt
new file mode 100644
index 0000000..30f013f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt
@@ -0,0 +1,100 @@
+PLX Technology OXNAS SoC Pinmux Controller
+==========================================
+
+The OXNAS Pinmux Controller, enables the IC to share one PAD to several
+functional blocks. The sharing is done by multiplexing the PAD input/output
+signals. For each PAD there are up to 8 muxing options (called periph modes).
+Since different modules require different PAD settings
+(like pull up, keeper, etc) the contoller controls also the PAD settings
+parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+OXNAS pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'pins' selects the function mode(also named pin
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, multi drive, etc.
+
+Required properties for iomux controller:
+- compatible: "plxtech,nas782x-pinctrl" or "plxtech,ox810se-pinctrl"
+- plxtech,mux-mask: array of mask (periph per bank) to describe if a pin can be
+ configured in this periph mode. All the periph and bank need to be describe.
+- plxtech,sys-ctrl: a phandle to the system controller syscon node
+
+How to create such array:
+
+Each column will represent the possible peripheral of the pinctrl
+Each line will represent a pio bank
+
+For example :
+Peripheral: 2 ( A and B)
+Bank: 2 (A, B and C)
+=>
+
+ /* A B */
+ 0xffffffff 0xffc00c3b /* pioA */
+ 0xffffffff 0x7fff3ccf /* pioB */
+
+For each peripheral/bank we will descibe in a u32 if a pin can be
+configured in it by putting 1 to the pin bit (1 << pin)
+
+Required properties for pin configuration node:
+- plxtech,pins: 4 integers array, represents a group of pins mux and config
+ setting. The format is plxtech,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
+ The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+ PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
+
+Bits used for CONFIG:
+ - None Yet
+
+Examples:
+
+pinctrl: pinctrl {
+ compatible = "plxtech,nas782x-pinctrl", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Regmap for sys registers */
+ plxtech,sys-ctrl = <&sys>;
+
+ /* Default, all-open mux-map */
+ plxtech,mux-mask = <
+ 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF
+ 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF
+ >;
+
+ uart0 {
+ pinctrl_uart0: uart0 {
+ plxtech,pins = <0 31 3 0
+ 0 32 3 0>;
+ };
+ pinctrl_uart0_modem: uart0_modem {
+ plxtech,pins = <0 27 3 0
+ 0 28 3 0
+ 0 29 3 0
+ 0 30 3 0
+ 0 33 3 0
+ 0 34 3 0>;
+ };
+ };
+};
+
+uart0: uart@200000 {
+ compatible = "ns16550a";
+ reg = <0x200000 0x100000>;
+ clocks = <&sysclk>;
+ interrupts = <23>;
+ reg-shift = <0>;
+ fifo-size = <16>;
+ reg-io-width = <1>;
+ current-speed = <115200>;
+ no-loopback-test;
+ status = "disabled";
+ resets = <&reset 17>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+};
--
1.9.1