Re: [PATCH 1/2] Documentation: synopsys-dw-mshc: add binding for resets

[Rob Herring]

On Thu, Mar 03, 2016 at 09:33:37AM +0800, Guodong Xu wrote:
> Add resets property to synopsys-dw-mshc bindings. It is intended to
> represent the hardware reset signal present internally in some host
> controller IC designs.
> 
> See Documentation/devicetree/bindings/reset/reset.txt for details.
> 
> Signed-off-by: Guodong Xu <guodong.xu@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> index 8636f5a..9b4896c 100644
> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> @@ -39,6 +39,10 @@ Required Properties:
>  
>  Optional properties:
>  
> +* resets: phandle + reset specifier pair, intended to represent hardware
> +  reset signal present internally in some host controller IC designs.
> +  See Documentation/devicetree/bindings/reset/reset.txt for details.
> +
>  * clocks: from common clock binding: handle to biu and ciu clocks for the
>    bus interface unit clock and the card interface unit clock.
>  
> @@ -48,7 +52,7 @@ Optional properties:
>    clock-frequency.  It is an error to omit both the ciu clock and the
>    clock-frequency.
>  
> -* clock-frequency: should be the frequency (in Hz) of the ciu clock.  If this
> +* clock-frequency: should be tke frequency (in Hz) of the ciu clock.  If this

You've added a typo here.

Otherwise,

Acked-by: Rob Herring <robh@xxxxxxxxxx>