[PATCH v2 3/4] arm64: dts: Add dts files for LG Electronics's lg1312 SoC

From: Chanho Min
Date: Thu Mar 10 2016 - 06:23:43 EST

Next message: Joseph CHANG: "[PATCH 1/3] dm9601: enable EP3 interrupt"
Previous message: Chanho Min: "[PATCH v2 1/4] arm64: add Kconfig entry for LG1K SoC family"
In reply to: Chanho Min: "[PATCH v2 1/4] arm64: add Kconfig entry for LG1K SoC family"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add initial dtsi file to support lg1312 SoC which based on
Cortex-A53. Also add dts file to support lg1312 reference board
which based on lg1312 SoC.

Signed-off-by: Chanho Min <chanho.min@xxxxxxx>
---
Changes for v2:
- remove self-defined macro.
- change root node's #size-cells to <2>.
- remove bootargs property.
- update psci support to the arm,psci-0.2.
- put fixed-clock property under the root node.
- add stdout-path property.
- update the GICC reg length to 0x2000
- add the GICH and GICV interface.
- change pmu compatible property to arm,coretex-a53-pmu.
- remove clock-frequency property from timer.
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/lg/Makefile | 5 +
arch/arm64/boot/dts/lg/lg1312-ref.dts | 36 ++++
arch/arm64/boot/dts/lg/lg1312.dtsi | 351 +++++++++++++++++++++++++++++++++
4 files changed, 393 insertions(+)
create mode 100644 arch/arm64/boot/dts/lg/Makefile
create mode 100644 arch/arm64/boot/dts/lg/lg1312-ref.dts
create mode 100644 arch/arm64/boot/dts/lg/lg1312.dtsi

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index f832b8a..90ce525 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -16,6 +16,7 @@ dts-dirs += rockchip
dts-dirs += socionext
dts-dirs += sprd
dts-dirs += xilinx
+dts-dirs += lg

subdir-y := $(dts-dirs)

diff --git a/arch/arm64/boot/dts/lg/Makefile b/arch/arm64/boot/dts/lg/Makefile
new file mode 100644
index 0000000..b0cc649
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/lg/lg1312-ref.dts b/arch/arm64/boot/dts/lg/lg1312-ref.dts
new file mode 100644
index 0000000..6d78d6b
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1312-ref.dts
@@ -0,0 +1,36 @@
+/*
+ * dts file for lg1312 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1312.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ model = "LG Electronics, DTV SoC LG1312 Reference Board";
+ compatible = "lge,lg1312-ref", "lge,lg1312";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x20000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
new file mode 100644
index 0000000..f889c74
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -0,0 +1,351 @@
+/*
+ * dts file for lg1312 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ compatible = "lge,lg1312";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci" ,"arm,psci-0.2";
+ method = "smc";
+ cpu_suspend = <0x84000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ gic: interrupt-controller@c0001000 {
+ #interrupt-cells = <3>;
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ reg = <0x0 0xc0001000 0x1000>,
+ <0x0 0xc0002000 0x2000>,
+ <0x0 0xc0004000 0x2000>,
+ <0x0 0xc0006000 0x2000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ clk_bus: clk_bus {
+ #clock-cells = <0>;
+
+ compatible = "fixed-clock";
+ clock-frequency = <198000000>;
+ clock-output-names = "BUSCLK";
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ eth0: ethernet@c1b00000 {
+ compatible = "cdns,gem";
+ reg = <0x0 0xc1b00000 0x1000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "hclk", "pclk";
+ phy-mode = "rmii";
+ /* Filled in by boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ amba {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ #interrupts-cells = <3>;
+
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ timers: timer@fd100000 {
+ compatible = "arm,sp804";
+ reg = <0x0 0xfd100000 0x1000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ wdog: watchdog@fd200000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xfd200000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ uart0: serial@fe000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfe000000 0x1000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ uart1: serial@fe100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfe100000 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ uart2: serial@fe200000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfe200000 0x1000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ spi0: ssp@fe800000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xfe800000 0x1000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ spi1: ssp@fe900000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xfe900000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ dmac0: dma@c1128000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xc1128000 0x1000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ gpio0: gpio@fd400000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd400000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio1: gpio@fd410000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd410000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio2: gpio@fd420000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd420000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio3: gpio@fd430000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd430000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ gpio4: gpio@fd440000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd440000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio5: gpio@fd450000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd450000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio6: gpio@fd460000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd460000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio7: gpio@fd470000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd470000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio8: gpio@fd480000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd480000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio9: gpio@fd490000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd490000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio10: gpio@fd4a0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4a0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio11: gpio@fd4b0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4b0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ gpio12: gpio@fd4c0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4c0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio13: gpio@fd4d0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4d0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio14: gpio@fd4e0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4e0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio15: gpio@fd4f0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4f0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio16: gpio@fd500000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd500000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status="disabled";
+ };
+ gpio17: gpio@fd510000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd510000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ };
+};
--
1.7.9.5

Next message: Joseph CHANG: "[PATCH 1/3] dm9601: enable EP3 interrupt"
Previous message: Chanho Min: "[PATCH v2 1/4] arm64: add Kconfig entry for LG1K SoC family"
In reply to: Chanho Min: "[PATCH v2 1/4] arm64: add Kconfig entry for LG1K SoC family"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]