[PATCH 10/22] ncr5380: Merge DMA implementation from atari_NCR5380 core driver
From: Finn Thain
Date: Mon Mar 14 2016 - 00:46:23 EST
Adopt the DMA implementation from atari_NCR5380.c. This means that
atari_scsi and sun3_scsi can make use of the NCR5380.c core driver
and the atari_NCR5380.c driver fork can be made redundant.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/NCR5380.c | 170 +++++++++++++++++++++++++++++++++++---------
drivers/scsi/arm/cumana_1.c | 3
drivers/scsi/arm/oak.c | 3
drivers/scsi/dmx3191d.c | 1
drivers/scsi/dtc.c | 2
drivers/scsi/dtc.h | 1
drivers/scsi/g_NCR5380.c | 2
drivers/scsi/g_NCR5380.h | 1
drivers/scsi/mac_scsi.c | 3
drivers/scsi/pas16.c | 2
drivers/scsi/pas16.h | 1
drivers/scsi/t128.c | 2
drivers/scsi/t128.h | 1
13 files changed, 152 insertions(+), 40 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-03-14 15:26:37.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-03-14 15:26:39.000000000 +1100
@@ -31,9 +31,6 @@
/*
* Further development / testing that should be done :
- * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete
- * code so that everything does the same thing that's done at the
- * end of a pseudo-DMA read operation.
*
* 4. Test SCSI-II tagged queueing (I have no devices which support
* tagged queueing)
@@ -117,6 +114,8 @@
*
* PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
*
+ * REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
+ *
* These macros MUST be defined :
*
* NCR5380_read(register) - read from the specified register
@@ -801,6 +800,72 @@ static void NCR5380_main(struct work_str
} while (!done);
}
+/*
+ * NCR5380_dma_complete - finish DMA transfer
+ * @instance: the scsi host instance
+ *
+ * Called by the interrupt handler when DMA finishes or a phase
+ * mismatch occurs (which would end the DMA transfer).
+ */
+
+static void NCR5380_dma_complete(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int transferred;
+ unsigned char **data;
+ int *count;
+ int saved_data = 0, overrun = 0;
+ unsigned char p;
+
+ if (hostdata->read_overruns) {
+ p = hostdata->connected->SCp.phase;
+ if (p & SR_IO) {
+ udelay(10);
+ if ((NCR5380_read(BUS_AND_STATUS_REG) &
+ (BASR_PHASE_MATCH | BASR_ACK)) ==
+ (BASR_PHASE_MATCH | BASR_ACK)) {
+ saved_data = NCR5380_read(INPUT_DATA_REG);
+ overrun = 1;
+ dsprintk(NDEBUG_DMA, instance, "read overrun handled\n");
+ }
+ }
+ }
+
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
+ hostdata->dma_len = 0;
+
+ data = (unsigned char **)&hostdata->connected->SCp.ptr;
+ count = &hostdata->connected->SCp.this_residual;
+ *data += transferred;
+ *count -= transferred;
+
+ if (hostdata->read_overruns) {
+ int cnt, toPIO;
+
+ if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
+ cnt = toPIO = hostdata->read_overruns;
+ if (overrun) {
+ dsprintk(NDEBUG_DMA, instance,
+ "Got an input overrun, using saved byte\n");
+ *(*data)++ = saved_data;
+ (*count)--;
+ cnt--;
+ toPIO--;
+ }
+ if (toPIO > 0) {
+ dsprintk(NDEBUG_DMA, instance,
+ "Doing %d byte PIO to 0x%p\n", cnt, *data);
+ NCR5380_transfer_pio(instance, &p, &cnt, data);
+ *count -= toPIO - cnt;
+ }
+ }
+ }
+}
+
#ifndef DONT_USE_INTR
/**
@@ -855,7 +920,22 @@ static irqreturn_t NCR5380_intr(int irq,
dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
irq, basr, sr, mr);
- if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
+ if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
+ /* Probably End of DMA, Phase Mismatch or Loss of BSY.
+ * We ack IRQ after clearing Mode Register. Workarounds
+ * for End of DMA errata need to happen in DMA Mode.
+ */
+
+ dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
+
+ if (hostdata->connected) {
+ NCR5380_dma_complete(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ } else {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ }
+ } else if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
(sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
/* Probably reselected */
NCR5380_write(SELECT_ENABLE_REG, 0);
@@ -1431,28 +1511,38 @@ static int NCR5380_transfer_dma(struct S
register unsigned char p = *phase;
register unsigned char *d = *data;
unsigned char tmp;
- int result;
+ int result = 0;
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
}
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ hostdata->connected->SCp.phase = p;
- /*
- * Note : on my sample board, watch-dog timeouts occurred when interrupts
- * were not disabled for the duration of a single DMA transfer, from
- * before the setting of DMA mode to after transfer of the last byte.
- */
+ if (p & SR_IO) {
+ if (hostdata->read_overruns)
+ c -= hostdata->read_overruns;
+ else if (hostdata->flags & FLAG_DMA_FIXUP)
+ --c;
+ }
- if (hostdata->flags & FLAG_DMA_FIXUP)
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
- else
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
- MR_ENABLE_EOP_INTR);
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, d);
- dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
+
+ if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) {
+ /* On the Medusa, it is a must to initialize the DMA before
+ * starting the NCR. This is also the cleaner way for the TT.
+ */
+ if (p & SR_IO)
+ result = NCR5380_dma_recv_setup(instance, d, c);
+ else
+ result = NCR5380_dma_send_setup(instance, d, c);
+ }
/*
* On the PAS16 at least I/O recovery delays are not needed here.
@@ -1470,6 +1560,29 @@ static int NCR5380_transfer_dma(struct S
NCR5380_io_delay(1);
}
+ if (hostdata->flags & FLAG_LATE_DMA_SETUP) {
+ /* On the Falcon, the DMA setup must be done after the last
+ * NCR access, else the DMA setup gets trashed!
+ */
+ if (p & SR_IO)
+ result = NCR5380_dma_recv_setup(instance, d, c);
+ else
+ result = NCR5380_dma_send_setup(instance, d, c);
+ }
+
+ /* On failure, NCR5380_dma_xxxx_setup() returns a negative int. */
+ if (result < 0)
+ return result;
+
+ /* For real DMA, result is the byte count. DMA interrupt is expected. */
+ if (result > 0) {
+ hostdata->dma_len = result;
+ return 0;
+ }
+
+ /* The result is zero iff pseudo DMA send/receive was completed. */
+ hostdata->dma_len = c;
+
/*
* A note regarding the DMA errata workarounds for early NMOS silicon.
*
@@ -1504,10 +1617,8 @@ static int NCR5380_transfer_dma(struct S
* request.
*/
- if (p & SR_IO) {
- result = NCR5380_dma_recv_setup(instance, d,
- hostdata->flags & FLAG_DMA_FIXUP ? c - 1 : c);
- if (!result && (hostdata->flags & FLAG_DMA_FIXUP)) {
+ if (hostdata->flags & FLAG_DMA_FIXUP) {
+ if (p & SR_IO) {
/*
* The workaround was to transfer fewer bytes than we
* intended to with the pseudo-DMA read function, wait for
@@ -1533,11 +1644,8 @@ static int NCR5380_transfer_dma(struct S
result = -1;
shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n");
}
- d[c - 1] = NCR5380_read(INPUT_DATA_REG);
- }
- } else {
- result = NCR5380_dma_send_setup(instance, d, c);
- if (!result && (hostdata->flags & FLAG_DMA_FIXUP)) {
+ d[*count - 1] = NCR5380_read(INPUT_DATA_REG);
+ } else {
/*
* Wait for the last byte to be sent. If REQ is being asserted for
* the byte we're interested, we'll ACK it and it will go false.
@@ -1550,11 +1658,8 @@ static int NCR5380_transfer_dma(struct S
}
}
}
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- *data = d + c;
- *count = 0;
+
+ NCR5380_dma_complete(instance);
return result;
}
@@ -1667,8 +1772,7 @@ static void NCR5380_information_transfer
do_abort(instance);
cmd->result = DID_ERROR << 16;
/* XXX - need to source or sink data here, as appropriate */
- } else
- cmd->SCp.this_residual -= transfersize - len;
+ }
} else {
/* Break up transfer into 3 ms chunks,
* presuming 6 accesses per handshake.
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-03-14 15:26:37.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-03-14 15:26:39.000000000 +1100
@@ -20,6 +20,7 @@
#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_dma_recv_setup cumanascsi_pread
#define NCR5380_dma_send_setup cumanascsi_pwrite
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command
@@ -245,7 +246,7 @@ static int cumanascsi1_probe(struct expa
host->irq = ec->irq;
- ret = NCR5380_init(host, FLAG_DMA_FIXUP);
+ ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP);
if (ret)
goto out_unmap;
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-03-14 15:26:37.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-03-14 15:26:39.000000000 +1100
@@ -26,6 +26,7 @@
#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
#define NCR5380_dma_recv_setup oakscsi_pread
#define NCR5380_dma_send_setup oakscsi_pwrite
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
@@ -144,7 +145,7 @@ static int oakscsi_probe(struct expansio
host->irq = NO_IRQ;
host->n_io_port = 255;
- ret = NCR5380_init(host, FLAG_DMA_FIXUP);
+ ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP);
if (ret)
goto out_unmap;
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-03-14 15:26:39.000000000 +1100
@@ -42,6 +42,7 @@
#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
#define NCR5380_dma_recv_setup(instance, dst, len) (0)
#define NCR5380_dma_send_setup(instance, src, len) (0)
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_implementation_fields /* none */
Index: linux/drivers/scsi/dtc.h
===================================================================
--- linux.orig/drivers/scsi/dtc.h 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/dtc.h 2016-03-14 15:26:39.000000000 +1100
@@ -23,6 +23,7 @@
dtc_dma_xfer_len(cmd)
#define NCR5380_dma_recv_setup dtc_pread
#define NCR5380_dma_send_setup dtc_pwrite
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_intr dtc_intr
#define NCR5380_queue_command dtc_queue_command
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-03-14 15:26:39.000000000 +1100
@@ -64,6 +64,7 @@
generic_NCR5380_dma_xfer_len(instance, cmd)
#define NCR5380_dma_recv_setup generic_NCR5380_pread
#define NCR5380_dma_send_setup generic_NCR5380_pwrite
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_intr generic_NCR5380_intr
#define NCR5380_queue_command generic_NCR5380_queue_command
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-03-14 15:26:39.000000000 +1100
@@ -37,6 +37,7 @@
macscsi_dma_xfer_len(instance, cmd)
#define NCR5380_dma_recv_setup macscsi_pread
#define NCR5380_dma_send_setup macscsi_pwrite
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_intr macscsi_intr
#define NCR5380_queue_command macscsi_queue_command
@@ -386,7 +387,7 @@ static int __init mac_scsi_probe(struct
#endif
host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
- error = NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags | FLAG_LATE_DMA_SETUP);
if (error)
goto fail_init;
Index: linux/drivers/scsi/pas16.h
===================================================================
--- linux.orig/drivers/scsi/pas16.h 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/pas16.h 2016-03-14 15:26:39.000000000 +1100
@@ -105,6 +105,7 @@
#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_dma_recv_setup pas16_pread
#define NCR5380_dma_send_setup pas16_pwrite
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_intr pas16_intr
#define NCR5380_queue_command pas16_queue_command
Index: linux/drivers/scsi/t128.h
===================================================================
--- linux.orig/drivers/scsi/t128.h 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/t128.h 2016-03-14 15:26:39.000000000 +1100
@@ -79,6 +79,7 @@
#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_dma_recv_setup t128_pread
#define NCR5380_dma_send_setup t128_pwrite
+#define NCR5380_dma_residual(instance) (0)
#define NCR5380_intr t128_intr
#define NCR5380_queue_command t128_queue_command
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-03-14 15:26:39.000000000 +1100
@@ -228,7 +228,7 @@ found:
instance->base = addr;
((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
- if (NCR5380_init(instance, 0))
+ if (NCR5380_init(instance, FLAG_LATE_DMA_SETUP))
goto out_unregister;
NCR5380_maybe_reset_bus(instance);
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-03-14 15:26:39.000000000 +1100
@@ -466,7 +466,7 @@ static int __init generic_NCR5380_detect
}
#endif
- if (NCR5380_init(instance, flags))
+ if (NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP))
goto out_unregister;
switch (overrides[current_override].board) {
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-03-14 15:26:39.000000000 +1100
@@ -375,7 +375,7 @@ static int __init pas16_detect(struct sc
instance->io_port = io_port;
- if (NCR5380_init(instance, FLAG_DMA_FIXUP))
+ if (NCR5380_init(instance, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP))
goto out_unregister;
NCR5380_maybe_reset_bus(instance);
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-03-14 15:26:34.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-03-14 15:26:39.000000000 +1100
@@ -208,7 +208,7 @@ found:
instance->base = base;
((struct NCR5380_hostdata *)instance->hostdata)->base = p;
- if (NCR5380_init(instance, FLAG_DMA_FIXUP))
+ if (NCR5380_init(instance, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP))
goto out_unregister;
NCR5380_maybe_reset_bus(instance);