[PATCH v6 net-next 00/10] API set for HW Buffer management

[Gregory CLEMENT]

Hi,

This is the sixth version of the API set for HW Buffer management (that was
initially submitted here:
http://thread.gmane.org/gmane.linux.kernel/2125152).

This version is just a rebasing onto the last net-next. I also added
the Tested-by flag from Sebastian Careba : "The patch set applies
successfully and it works well, no more Samba issues any longer".

For the record in the previous versions I made the following changes:
v4 -> v5:
- Add a field with the size of the buffer of the pool was added. It
  then allow to fix some misused size in the mvneta_bm code when using
  the new framework.

- Add a new patch from Marcin for sram allowing to require
  non-bufferable access to the memory. It was needed for the hardware
  buffer management of the mvneta.

- Fix the build issue notified by the 0-day builder when building the
  drivers as module.

v3 -> v4
- Fix build issue when HWBM is not selected

v2 -> v3
- Make a HWBM and a SWBM version of the mvneta_rx() function in order
  to reduce the the conditional code. Kept a condition inside the
  mvneta_poll because specializing this function would have means
  duplicating 95% of the code.

- Put back the register_netdev() call at the end of the mvneta_probe()
  function. In order to have a unique ID for each port, just used a
  global variable in the driver.

- Added a fix from Marcin in the "net: mvneta: bm: add support for
  hardware buffer management" patch: "when dropping packets, only
  buffer pointers passed from BM to descriptors have to be returned to
  the pool. In submitted version after closing the port and
  mvneta_rxq_deinit(), it was very likely that a lot of fake buffers
  are added to the pool, because all descriptors took part in
  iteration."

- Removed the select MVNETA_BM from the Kconfig, it will let the user
  the choice to use not use it if they want.

v1 -> v2
- The hardware buffer management helpers are no more built by default
  and now depend on a hidden config symbol which has to be selected
  by the driver if needed
- The hwbm_pool_refill() and hwbm_pool_add() now receive a gfp_t as
  argument allowing the caller to specify the flag it needs.
- buf_num is now tested to ensure there is no wrapping
- A spinlock has been added to protect the hwbm_pool_add() function in
  SMP or irq context.
- used pr_warn instead of pr_debug in case of errors.
- fixed the mvneta implementation by returning the buffer to the pool
  at various place instead of ignoring it.
- Squashed "bus: mvenus-mbus: Fix size test for
   mvebu_mbus_get_dram_win_info" into bus: mvebu-mbus: provide api for
   obtaining IO and DRAM window information.
- Added my signed-otf-by on all the patches as submitter of the series.
- Renamed the dts patches with the pattern "ARM: dts: platform:"
- Removed the patch "ARM: mvebu: enable SRAM support in
  mvebu_v7_defconfig" of this series and already applied it
- Modified the order of the patches.

In order to ease the test the branch mvneta-BM-framework-v6 is
available at git@xxxxxxxxxx:MISL-EBU-System-SW/mainline-public.git.

Thanks,

Gregory


Gregory CLEMENT (3):
  ARM: dts: armada-xp-openblocks-ax3-4: Add BM support
  net: add a hardware buffer management helper API
  net: mvneta: Use the new hwbm framework

Marcin Wojtas (7):
  misc: sram: add optional ioremap without write combining
  ARM: dts: armada-38x: add buffer manager nodes
  ARM: dts: armada-38x: enable buffer manager support on Armada 38x
    boards
  ARM: dts: armada-xp: add buffer manager nodes
  ARM: dts: armada-xp: enable buffer manager support on Armada XP boards
  bus: mvebu-mbus: provide api for obtaining IO and DRAM window
    information
  net: mvneta: bm: add support for hardware buffer management

 .../bindings/net/marvell-armada-370-neta.txt       |  19 +-
 .../devicetree/bindings/net/marvell-neta-bm.txt    |  49 ++
 Documentation/devicetree/bindings/sram/sram.txt    |   5 +
 arch/arm/boot/dts/armada-385-db-ap.dts             |  20 +-
 arch/arm/boot/dts/armada-388-clearfog.dts          |   6 +
 arch/arm/boot/dts/armada-388-db.dts                |  17 +-
 arch/arm/boot/dts/armada-388-gp.dts                |  17 +-
 .../arm/boot/dts/armada-38x-solidrun-microsom.dtsi |  15 +-
 arch/arm/boot/dts/armada-38x.dtsi                  |  19 +
 arch/arm/boot/dts/armada-xp-db.dts                 |  19 +-
 arch/arm/boot/dts/armada-xp-gp.dts                 |  19 +-
 arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts   |  19 +-
 arch/arm/boot/dts/armada-xp.dtsi                   |  19 +
 drivers/bus/mvebu-mbus.c                           |  52 +++
 drivers/misc/sram.c                                |   5 +-
 drivers/net/ethernet/marvell/Kconfig               |  14 +
 drivers/net/ethernet/marvell/Makefile              |   1 +
 drivers/net/ethernet/marvell/mvneta.c              | 509 +++++++++++++++++++--
 drivers/net/ethernet/marvell/mvneta_bm.c           | 487 ++++++++++++++++++++
 drivers/net/ethernet/marvell/mvneta_bm.h           | 182 ++++++++
 include/linux/mbus.h                               |   3 +
 include/net/hwbm.h                                 |  28 ++
 net/Kconfig                                        |   3 +
 net/core/Makefile                                  |   1 +
 net/core/hwbm.c                                    |  87 ++++
 25 files changed, 1568 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/marvell-neta-bm.txt
 create mode 100644 drivers/net/ethernet/marvell/mvneta_bm.c
 create mode 100644 drivers/net/ethernet/marvell/mvneta_bm.h
 create mode 100644 include/net/hwbm.h
 create mode 100644 net/core/hwbm.c

-- 
2.5.0