Re: [PATCH v4 2/5] x86/msr: Carry on after a non-"safe" MSR access fails without !panic_on_oops

[Borislav Petkov]

On Sat, Mar 12, 2016 at 10:08:49AM -0800, Andy Lutomirski wrote:
> This demotes an OOPS and likely panic due to a failed non-"safe" MSR
> access to a WARN_ONCE and, for RDMSR, a return value of zero.  If
> panic_on_oops is set, then failed unsafe MSR accesses will still
> oops and panic.
> 
> To be clear, this type of failure should *not* happen.  This patch
> exists to minimize the chance of nasty undebuggable failures due on
> systems that used to work due to a now-fixed CONFIG_PARAVIRT=y bug.
> 
> Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxx>
> ---
>  arch/x86/include/asm/msr.h | 10 ++++++++--
>  arch/x86/mm/extable.c      | 33 +++++++++++++++++++++++++++++++++
>  2 files changed, 41 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
> index 93fb7c1cffda..1487054a1a70 100644
> --- a/arch/x86/include/asm/msr.h
> +++ b/arch/x86/include/asm/msr.h
> @@ -92,7 +92,10 @@ static inline unsigned long long native_read_msr(unsigned int msr)
>  {
>  	DECLARE_ARGS(val, low, high);
>  
> -	asm volatile("rdmsr" : EAX_EDX_RET(val, low, high) : "c" (msr));
> +	asm volatile("1: rdmsr\n"
> +		     "2:\n"
> +		     _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_rdmsr_unsafe)
> +		     : EAX_EDX_RET(val, low, high) : "c" (msr));
>  	if (msr_tracepoint_active(__tracepoint_read_msr))
>  		do_trace_read_msr(msr, EAX_EDX_VAL(val, low, high), 0);
>  	return EAX_EDX_VAL(val, low, high);
> @@ -119,7 +122,10 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
>  static inline void native_write_msr(unsigned int msr,
>  				    unsigned low, unsigned high)
>  {
> -	asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory");
> +	asm volatile("1: wrmsr\n"
> +		     "2:\n"
> +		     _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)

This might be a good idea:

[    0.220066] cpuidle: using governor menu
[    0.224000] ------------[ cut here ]------------
[    0.224000] WARNING: CPU: 0 PID: 1 at arch/x86/mm/extable.c:74 ex_handler_wrmsr_unsafe+0x73/0x80()
[    0.224000] unchecked MSR access error: WRMSR to 0xdeadbeef (tried to write 0x000000000000caca)
[    0.224000] Modules linked in:
[    0.224000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.5.0-rc7+ #7
[    0.224000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[    0.224000]  0000000000000000 ffff88007c0d7c08 ffffffff812f13a3 ffff88007c0d7c50
[    0.224000]  ffffffff81a40ffe ffff88007c0d7c40 ffffffff8105c3b1 ffffffff81717710
[    0.224000]  ffff88007c0d7d18 0000000000000000 ffffffff816207d0 0000000000000000
[    0.224000] Call Trace:
[    0.224000]  [<ffffffff812f13a3>] dump_stack+0x67/0x94
[    0.224000]  [<ffffffff8105c3b1>] warn_slowpath_common+0x91/0xd0
[    0.224000]  [<ffffffff816207d0>] ? amd_cpu_notify+0x40/0x40
[    0.224000]  [<ffffffff8105c43c>] warn_slowpath_fmt+0x4c/0x50
[    0.224000]  [<ffffffff816207d0>] ? amd_cpu_notify+0x40/0x40
[    0.224000]  [<ffffffff8131de53>] ? __this_cpu_preempt_check+0x13/0x20
[    0.224000]  [<ffffffff8104efe3>] ex_handler_wrmsr_unsafe+0x73/0x80

and it looks helpful and all but when you do it pretty early - for
example I added a

	 wrmsrl(0xdeadbeef, 0xcafe);

at the end of pat_bsp_init() and the machine explodes with an early
panic. I'm wondering what is better - early panic or an early #GP from a
missing MSR.

And more specifically, can we do better to handle the early case
gracefully too?

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.