[PATCH 1/2] pinctrl: sh-pfc: enable to indicate GPSR/IPSR/MOD_SEL for debug
From: Kuninori Morimoto
Date: Tue Mar 15 2016 - 20:48:04 EST
From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Current sh_pfc can't indicate GPSR/IPSR/MOD_SEL name for debug.
Of course we can get it from indicated register address, but it
is not convenient. This patch enables to indicate these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
drivers/pinctrl/sh-pfc/core.c | 3 ++-
drivers/pinctrl/sh-pfc/sh_pfc.h | 9 ++++++---
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
index 0c2d14c..c59f858 100644
--- a/drivers/pinctrl/sh-pfc/core.c
+++ b/drivers/pinctrl/sh-pfc/core.c
@@ -204,8 +204,9 @@ static void sh_pfc_write_config_reg(struct sh_pfc *pfc,
sh_pfc_config_reg_helper(pfc, crp, field, &mapped_reg, &mask, &pos);
- dev_dbg(pfc->dev, "write_reg addr = %x, value = 0x%x, field = %u, "
+ dev_dbg(pfc->dev, "%s: write_reg addr = %x, value = 0x%x, field = %u, "
"r_width = %u, f_width = %u\n",
+ crp->name,
crp->reg, value, field, crp->reg_width, crp->field_width);
mask = ~(mask << pos);
diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
index a490834..2b593fc 100644
--- a/drivers/pinctrl/sh-pfc/sh_pfc.h
+++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
@@ -94,6 +94,7 @@ struct pinmux_func {
};
struct pinmux_cfg_reg {
+ const char *name;
u32 reg;
u8 reg_width, field_width;
const u16 *enum_ids;
@@ -110,7 +111,8 @@ struct pinmux_cfg_reg {
* (from left to right, i.e. MSB to LSB), 2^f_width enum IDs must be specified,
* one for each possible combination of the register field bit values.
*/
-#define PINMUX_CFG_REG(name, r, r_width, f_width) \
+#define PINMUX_CFG_REG(_name, r, r_width, f_width) \
+ .name = _name, \
.reg = r, .reg_width = r_width, .field_width = f_width, \
.enum_ids = (const u16 [(r_width / f_width) * (1 << f_width)])
@@ -125,7 +127,8 @@ struct pinmux_cfg_reg {
* (from left to right, i.e. MSB to LSB), 2^var_fwi enum IDs must be specified,
* one for each possible combination of the register field bit values.
*/
-#define PINMUX_CFG_REG_VAR(name, r, r_width, var_fw0, var_fwn...) \
+#define PINMUX_CFG_REG_VAR(_name, r, r_width, var_fw0, var_fwn...) \
+ .name = _name, \
.reg = r, .reg_width = r_width, \
.var_field_width = (const u8 [r_width]) \
{ var_fw0, var_fwn, 0 }, \
@@ -465,7 +468,7 @@ struct sh_pfc_soc_info {
*/
#define PORTCR(nr, reg) \
{ \
- PINMUX_CFG_REG_VAR("PORT" nr "CR", reg, 8, 2, 2, 1, 3) {\
+ PINMUX_CFG_REG_VAR("PORT" #nr "CR", reg, 8, 2, 2, 1, 3) {\
/* PULMD[1:0], handled by .set_bias() */ \
0, 0, 0, 0, \
/* IE and OE */ \
--
1.9.1