Re: [PART1 RFC v2 05/10] KVM: x86: Detect and Initialize AVIC support

[Suravee Suthikulpanit]

Hi,

On 03/16/2016 12:22 AM, Paolo Bonzini wrote:
> > > Why is this necessary?  The APIC access page is a peculiarity of Intel
> > > >>processors (and the special memslot for only needs to map 0xfee00000 to
> > > >>0xfee00fff; after that there is the MSI area).
> > >
> > >The current lapic regs page is allocated using get_zeroed_page(), which
> > >can be paged out. If I use these pages for AVIC backing pages, it seems
> > >to cause VM to slow down quite a bit due to a lot of page faults.
> What causes the lapic regs page to be paged out?

This is mainly causing a large number of VMEXIT due to NPF.  In my test 
running hackbench in the guest. The following are perf result profiling 
for 10 seconds in the host in two cases:

CASE1: Using x86_set_memory_region() for AVIC backing page

# ./perf-vmexit.sh 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.813 MB perf.data.guest (30356 samples) ]


Analyze events for all VMs, all VCPUs:

             VM-EXIT    Samples  Samples%     Time%    Min Time    Max 
Time         Avg time

           interrupt      10042    66.30%    81.33%      0.43us 
202.50us      7.43us ( +-   1.20% )
                 msr       5004    33.04%    15.76%      0.73us 
12.21us      2.89us ( +-   0.43% )
               pause         58     0.38%     0.18%      0.56us 
5.88us      2.92us ( +-   6.43% )
                 npf         35     0.23%     2.01%      6.41us 
207.78us     52.70us ( +-  23.67% )
                 nmi          4     0.03%     0.02%      2.31us 
4.67us      3.49us ( +-  14.26% )
                  io          3     0.02%     0.70%     82.75us 
360.90us    214.28us ( +-  37.64% )
     avic_incomp_ipi          1     0.01%     0.00%      2.17us 
2.17us      2.17us ( +-   0.00% )

Total Samples:15147, Total events handled time:91715.78us.


CASE2: Using the lapic regs page for AVIC backing page.

# ./perf-vmexit.sh 10
[ perf record: Woken up 255 times to write data ]
[ perf record: Captured and wrote 509.202 MB perf.data.guest (5718856 
samples) ]


Analyze events for all VMs, all VCPUs:

             VM-EXIT    Samples  Samples%     Time%    Min Time    Max 
Time         Avg time

                 npf    1897710    99.33%    98.08%      1.09us 
243.22us      1.67us ( +-   0.04% )
           interrupt       7818     0.41%     1.44%      0.44us 
216.55us      5.97us ( +-   1.92% )
                 msr       5001     0.26%     0.45%      0.68us 
12.58us      2.89us ( +-   0.50% )
               pause         25     0.00%     0.00%      0.71us 
4.23us      2.03us ( +-  10.76% )
                  io          4     0.00%     0.03%     73.91us 
337.29us    206.74us ( +-  26.38% )
                 nmi          1     0.00%     0.00%      5.92us 
5.92us      5.92us ( +-   0.00% )

Total Samples:1910559, Total events handled time:3229214.64us.

Thanks,
Suravee