Re: [PATCH V2] regulator: pwm: Prints error number along with detail

[Lee Jones]

On Mon, 14 Mar 2016, Laxman Dewangan wrote:

> Prints the error number along with error message when any
> error occurs. This help on getting the reason of failure
> quickly from log without any code instrument.
> 
> Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> This was part of the series:
> regulator: pwm: Add supports for multiple instance and voltage linear step
> But first 2 patches are already applied of this series, creating patch on top
> of applied patches and resetting the patch count.
> 
> - Taken care of the comment for error print like it should be "foo: %d\n"
>   style.
> - Added error number on all possible places.
> 
>  drivers/regulator/pwm-regulator.c | 23 ++++++++++++-----------
>  1 file changed, 12 insertions(+), 11 deletions(-)

Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>

> diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
> index 4689d62..f99a697 100644
> --- a/drivers/regulator/pwm-regulator.c
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -70,7 +70,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
>  
>  	ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
>  	if (ret) {
> -		dev_err(&rdev->dev, "Failed to configure PWM\n");
> +		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
>  		return ret;
>  	}
>  
> @@ -146,13 +146,13 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
>  
>  	ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period);
>  	if (ret) {
> -		dev_err(&rdev->dev, "Failed to configure PWM\n");
> +		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
>  		return ret;
>  	}
>  
>  	ret = pwm_enable(drvdata->pwm);
>  	if (ret) {
> -		dev_err(&rdev->dev, "Failed to enable PWM\n");
> +		dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
>  		return ret;
>  	}
>  	drvdata->volt_uV = min_uV;
> @@ -200,8 +200,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
>  
>  	if ((length < sizeof(*duty_cycle_table)) ||
>  	    (length % sizeof(*duty_cycle_table))) {
> -		dev_err(&pdev->dev,
> -			"voltage-table length(%d) is invalid\n",
> +		dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
>  			length);
>  		return -EINVAL;
>  	}
> @@ -214,7 +213,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
>  					 (u32 *)duty_cycle_table,
>  					 length / sizeof(u32));
>  	if (ret) {
> -		dev_err(&pdev->dev, "Failed to read voltage-table\n");
> +		dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
>  		return ret;
>  	}
>  
> @@ -277,16 +276,18 @@ static int pwm_regulator_probe(struct platform_device *pdev)
>  
>  	drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
>  	if (IS_ERR(drvdata->pwm)) {
> -		dev_err(&pdev->dev, "Failed to get PWM\n");
> -		return PTR_ERR(drvdata->pwm);
> +		ret = PTR_ERR(drvdata->pwm);
> +		dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret);
> +		return ret;
>  	}
>  
>  	regulator = devm_regulator_register(&pdev->dev,
>  					    &drvdata->desc, &config);
>  	if (IS_ERR(regulator)) {
> -		dev_err(&pdev->dev, "Failed to register regulator %s\n",
> -			drvdata->desc.name);
> -		return PTR_ERR(regulator);
> +		ret = PTR_ERR(regulator);
> +		dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
> +			drvdata->desc.name, ret);
> +		return ret;
>  	}
>  
>  	return 0;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog