Re: [PATCH] acpi: Issue _OSC call for native thermal interrupt handling

[Rafael J. Wysocki]

On Wednesday, March 16, 2016 03:25:19 PM Srinivas Pandruvada wrote:
> There are several reports of freeze on enabling HWP (Hardware PStates)
> feature on Skylake based systems by Intel P states driver. The root
> cause is identified as the HWP interrupts causing BIOS code to freeze.
> HWP interrupts uses thermal LVT.
> Linux natively handles thermal interrupts, but in Skylake based systems
> SMM will take control of thermal interrupts. This is a problem for several
> reasons:
> - It is freezing in BIOS when tries to handle thermal interrupt, which
> will require BIOS upgrade
> - With SMM handling thermal we loose all the reporting features of
> Linux arch/x86/kernel/cpu/mcheck/therm_throt driver
> - Some thermal drivers like x86-package-temp driver depends on the thermal
> threshold interrupts
> - The HWP interrupts are useful for debugging and tuning performance
> 
> So we need native handling of thermal interrupts. To inform SMM that
> OS will handle thermal interrupts, we need to use _OSC under processor
> scope very early in ACPI initialization flow. This needs to be done
> before SMM code path looks for _OSC capabilities. The bit 12 of
> _OSC in processor scope defines whether OS will handle thermal interrupts.
> When bit 12 is set to 1, OS will handle thermal interrupts.
> Refer to this document for details on _OSC
> http://www.intel.com/content/www/us/en/standards/processor-vendor-
> specific-acpi-specification.html
> 
> This change introduces a new function acpi_early_processor_set_osc(),
> which walks acpi name space and finds acpi processor object and
> set capability via _OSC method to take over thermal LVT.
> 
> Also this change writes HWP status bits to 0 to clear any HWP status
> bits in intel_thermal_interrupt().
> 
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>

Has this version of the patch been tested on a system where the problem
is reproducible?

> ---
>  arch/x86/kernel/cpu/mcheck/therm_throt.c |  8 ++++++
>  drivers/acpi/acpi_processor.c            | 42 +++++++++++++++++++++++++++++++-
>  drivers/acpi/bus.c                       |  3 +++
>  drivers/acpi/internal.h                  |  2 ++
>  4 files changed, 54 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
> index 0b445c2..bb331f6 100644
> --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
> +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
> @@ -79,6 +79,8 @@ static atomic_t therm_throt_en	= ATOMIC_INIT(0);
>  
>  static u32 lvtthmr_init __read_mostly;
>  
> +static bool thermal_hwp_interrupt_support;
> +
>  #ifdef CONFIG_SYSFS
>  #define define_therm_throt_device_one_ro(_name)				\
>  	static DEVICE_ATTR(_name, 0444,					\
> @@ -384,6 +386,9 @@ static void intel_thermal_interrupt(void)
>  {
>  	__u64 msr_val;
>  
> +	if (thermal_hwp_interrupt_support)
> +		wrmsrl_safe(MSR_HWP_STATUS, 0);
> +
>  	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
>  
>  	/* Check for violation of core thermal thresholds*/
> @@ -552,6 +557,9 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
>  	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
>  	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
>  
> +	if (static_cpu_has(X86_FEATURE_HWP))
> +		thermal_hwp_interrupt_support = true;
> +
>  	/* Unmask the thermal vector: */
>  	l = apic_read(APIC_LVTTHMR);
>  	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index 6979186..5a78279 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -391,7 +391,6 @@ static int acpi_processor_add(struct acpi_device *device,
>  	if (pr->id >= setup_max_cpus && pr->id != 0)
>  		return 0;
>  #endif
> -
>  	BUG_ON(pr->id >= nr_cpu_ids);
>  
>  	/*
> @@ -491,6 +490,47 @@ static void acpi_processor_remove(struct acpi_device *device)
>  }
>  #endif /* CONFIG_ACPI_HOTPLUG_CPU */
>  

It occurs to me that the whole thing is only necessary on x86, so maybe it can
go under a #ifdef?

Or even to arch/x86/acpi/ (boot.c or a new file)?

> +static bool acpi_hwp_native_thermal_lvt_set;
> +static acpi_status acpi_set_hwp_native_thermal_lvt_osc(acpi_handle handle,
> +						       u32 lvl, void *context,
> +						       void **rv)
> +{
> +	u8 sb_uuid_str[] = "4077A616-290C-47BE-9EBD-D87058713953";
> +	u32 capbuf[2];
> +	struct acpi_osc_context osc_context = {
> +		.uuid_str = sb_uuid_str,
> +		.rev = 1,
> +		.cap.length = 8,
> +		.cap.pointer = capbuf,
> +	};
> +
> +	if (acpi_hwp_native_thermal_lvt_set)
> +		return AE_OK;
> +
> +	if (!static_cpu_has(X86_FEATURE_HWP))
> +		return AE_OK;

This check can be made once in acpi_early_processor_set_osc().

> +
> +	capbuf[0] = 0x0000;
> +	capbuf[1] = 0x1000; /* set bit 12 */
> +
> +	if (ACPI_SUCCESS(acpi_run_osc(handle, &osc_context))) {
> +		acpi_hwp_native_thermal_lvt_set = true;
> +		kfree(osc_context.ret.pointer);
> +	}
> +
> +	return AE_OK;
> +}
> +
> +void acpi_early_processor_set_osc(void)
> +{
> +	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
> +			    ACPI_UINT32_MAX,
> +			    acpi_set_hwp_native_thermal_lvt_osc,
> +			    NULL, NULL, NULL);
> +	acpi_get_devices(ACPI_PROCESSOR_DEVICE_HID,
> +			 acpi_set_hwp_native_thermal_lvt_osc, NULL, NULL);
> +}
> +
>  /*
>   * The following ACPI IDs are known to be suitable for representing as
>   * processor devices.
> diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> index 891c42d..7e73aea 100644
> --- a/drivers/acpi/bus.c
> +++ b/drivers/acpi/bus.c
> @@ -1005,6 +1005,9 @@ static int __init acpi_bus_init(void)
>  		goto error1;
>  	}
>  
> +	/* Set capability bits for _OSC under processor scope */
> +	acpi_early_processor_set_osc();
> +
>  	/*
>  	 * _OSC method may exist in module level code,
>  	 * so it must be run after ACPI_FULL_INITIALIZATION
> diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
> index 1e6833a..5c787ac 100644
> --- a/drivers/acpi/internal.h
> +++ b/drivers/acpi/internal.h
> @@ -138,6 +138,8 @@ void acpi_early_processor_set_pdc(void);
>  static inline void acpi_early_processor_set_pdc(void) {}
>  #endif
>  
> +void acpi_early_processor_set_osc(void);
> +
>  /* --------------------------------------------------------------------------
>                                    Embedded Controller
>     -------------------------------------------------------------------------- */
> 

Thanks,
Rafael