[PATCH v4 3/7] usb: mux: add common code for Intel dual role port mux
From: Lu Baolu
Date: Thu Mar 17 2016 - 01:48:25 EST
Several Intel PCHs and SOCs have an internal mux that is used to
share one USB port between device controller and host controller.
A usb port mux could be abstracted as the following elements:
1) mux state: HOST or PERIPHERAL;
2) an extcon cable which triggers the change of mux state between
HOST and PERIPHERAL;
3) The required action to do the real port switch.
This patch adds the common code to handle usb port mux. With this
common code, the individual mux driver, which always is platform
dependent, could focus on the real operation of mux switch.
Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Reviewed-by: Felipe Balbi <balbi@xxxxxxxxxx>
---
Documentation/ABI/testing/sysfs-bus-platform | 15 +++
MAINTAINERS | 7 ++
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 1 +
drivers/usb/mux/Kconfig | 12 ++
drivers/usb/mux/Makefile | 4 +
drivers/usb/mux/intel-mux.c | 180 +++++++++++++++++++++++++++
include/linux/usb/intel-mux.h | 43 +++++++
8 files changed, 264 insertions(+)
create mode 100644 drivers/usb/mux/Kconfig
create mode 100644 drivers/usb/mux/Makefile
create mode 100644 drivers/usb/mux/intel-mux.c
create mode 100644 include/linux/usb/intel-mux.h
diff --git a/Documentation/ABI/testing/sysfs-bus-platform b/Documentation/ABI/testing/sysfs-bus-platform
index 5172a61..23bf76e 100644
--- a/Documentation/ABI/testing/sysfs-bus-platform
+++ b/Documentation/ABI/testing/sysfs-bus-platform
@@ -18,3 +18,18 @@ Description:
devices to opt-out of driver binding using a driver_override
name such as "none". Only a single driver may be specified in
the override, there is no support for parsing delimiters.
+
+What: /sys/bus/platform/devices/.../port_mux
+Date: Febuary 2016
+Contact: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
+Description:
+ In some platforms, a single USB port is shared between a USB host
+ controller and a device controller. A USB mux driver is needed to
+ handle the port mux. port_mux attribute shows and stores the mux
+ state.
+ For read:
+ 'peripheral' - mux switched to PERIPHERAL controller;
+ 'host' - mux switched to HOST controller.
+ For write:
+ 'peripheral' - mux will be switched to PERIPHERAL controller;
+ 'host' - mux will be switched to HOST controller.
diff --git a/MAINTAINERS b/MAINTAINERS
index da3e4d8..0dbee11 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11399,6 +11399,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/phy/
+USB PORT MUX DRIVER
+M: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
+L: linux-usb@xxxxxxxxxxxxxxx
+S: Supported
+F: include/linux/usb/intel-mux.h
+F: drivers/usb/mux/intel-mux.c
+
USB PRINTER DRIVER (usblp)
M: Pete Zaitcev <zaitcev@xxxxxxxxxx>
L: linux-usb@xxxxxxxxxxxxxxx
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 8ed451d..dbd6620 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -149,6 +149,8 @@ endif # USB
source "drivers/usb/phy/Kconfig"
+source "drivers/usb/mux/Kconfig"
+
source "drivers/usb/gadget/Kconfig"
config USB_LED_TRIG
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index d5c57f1..6433f0c 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_USB) += core/
obj-$(CONFIG_USB_SUPPORT) += phy/
+obj-$(CONFIG_USB_SUPPORT) += mux/
obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_DWC2) += dwc2/
diff --git a/drivers/usb/mux/Kconfig b/drivers/usb/mux/Kconfig
new file mode 100644
index 0000000..62e2cc3
--- /dev/null
+++ b/drivers/usb/mux/Kconfig
@@ -0,0 +1,12 @@
+#
+# USB port mux driver configuration
+#
+menu "USB Port MUX drivers"
+config INTEL_USB_MUX
+ select EXTCON
+ def_bool n
+ help
+ Common code for all Intel dual role port mux drivers. All Intel
+ usb port mux drivers should select it.
+
+endmenu
diff --git a/drivers/usb/mux/Makefile b/drivers/usb/mux/Makefile
new file mode 100644
index 0000000..84f0ae8
--- /dev/null
+++ b/drivers/usb/mux/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for USB port mux drivers
+#
+obj-$(CONFIG_INTEL_USB_MUX) += intel-mux.o
diff --git a/drivers/usb/mux/intel-mux.c b/drivers/usb/mux/intel-mux.c
new file mode 100644
index 0000000..bb7b192
--- /dev/null
+++ b/drivers/usb/mux/intel-mux.c
@@ -0,0 +1,180 @@
+/**
+ * intel_mux.c - USB Port Mux support
+ *
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/extcon.h>
+#include <linux/err.h>
+
+struct intel_usb_mux {
+ struct device *dev;
+ char *cable_name;
+ int (*cable_set_cb)(struct device *dev);
+ int (*cable_unset_cb)(struct device *dev);
+
+ struct notifier_block nb;
+ struct extcon_specific_cable_nb obj;
+
+ /*
+ * The state of the mux.
+ * 0, 1 - mux switch state
+ * -1 - uninitialized state
+ */
+ int mux_state;
+
+ /* lock for mux_state */
+ struct mutex mux_mutex;
+};
+
+static int usb_mux_change_state(struct intel_usb_mux *mux, int state)
+{
+ int ret;
+ struct device *dev = mux->dev;
+
+ dev_WARN_ONCE(dev,
+ !mutex_is_locked(&mux->mux_mutex),
+ "mutex is unlocked\n");
+
+ mux->mux_state = state;
+
+ if (mux->mux_state)
+ ret = mux->cable_set_cb(dev);
+ else
+ ret = mux->cable_unset_cb(dev);
+
+ return ret;
+}
+
+static int usb_mux_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct intel_usb_mux *mux;
+ int state;
+ int ret = NOTIFY_DONE;
+
+ mux = container_of(nb, struct intel_usb_mux, nb);
+
+ state = extcon_get_cable_state(mux->obj.edev,
+ mux->cable_name);
+
+ if (mux->mux_state == -1 || mux->mux_state != state) {
+ mutex_lock(&mux->mux_mutex);
+ ret = usb_mux_change_state(mux, state);
+ mutex_unlock(&mux->mux_mutex);
+ }
+
+ return ret;
+}
+
+static ssize_t port_mux_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct intel_usb_mux *mux = dev_get_drvdata(dev);
+
+ if (dev_WARN_ONCE(dev, !mux, "mux without data structure\n"))
+ return 0;
+
+ return sprintf(buf, "%s\n", mux->mux_state ? "host" : "peripheral");
+}
+
+static ssize_t port_mux_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct intel_usb_mux *mux = dev_get_drvdata(dev);
+ int state;
+
+ if (dev_WARN_ONCE(dev, !mux, "mux without data structure\n"))
+ return -EINVAL;
+
+ if (sysfs_streq(buf, "peripheral"))
+ state = 0;
+ else if (sysfs_streq(buf, "host"))
+ state = 1;
+ else
+ return -EINVAL;
+
+ mutex_lock(&mux->mux_mutex);
+ usb_mux_change_state(mux, state);
+ mutex_unlock(&mux->mux_mutex);
+
+ return count;
+}
+static DEVICE_ATTR_RW(port_mux);
+
+int intel_usb_mux_bind_cable(struct device *dev,
+ char *extcon_name,
+ char *cable_name,
+ int (*cable_set_cb)(struct device *dev),
+ int (*cable_unset_cb)(struct device *dev))
+{
+ int ret;
+ struct intel_usb_mux *mux;
+
+ if (!cable_name)
+ return -ENODEV;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ mux->dev = dev;
+ mux->cable_name = kstrdup(cable_name, GFP_KERNEL);
+ mux->cable_set_cb = cable_set_cb;
+ mux->cable_unset_cb = cable_unset_cb;
+ mux->nb.notifier_call = usb_mux_notifier;
+ mutex_init(&mux->mux_mutex);
+ mux->mux_state = -1;
+ dev_set_drvdata(dev, mux);
+ ret = extcon_register_interest(&mux->obj, extcon_name,
+ cable_name, &mux->nb);
+ if (ret) {
+ kfree(mux->cable_name);
+ dev_err(dev, "failed to register extcon notifier\n");
+ return -ENODEV;
+ }
+
+ usb_mux_notifier(&mux->nb, 0, NULL);
+
+ /* register the sysfs interface */
+ ret = device_create_file(dev, &dev_attr_port_mux);
+ if (ret) {
+ extcon_unregister_interest(&mux->obj);
+ kfree(mux->cable_name);
+ dev_err(dev, "failed to create sysfs attribute\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_usb_mux_bind_cable);
+
+int intel_usb_mux_unbind_cable(struct device *dev)
+{
+ struct intel_usb_mux *mux = dev_get_drvdata(dev);
+
+ device_remove_file(dev, &dev_attr_port_mux);
+ extcon_unregister_interest(&mux->obj);
+ kfree(mux->cable_name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_usb_mux_unbind_cable);
+
+#ifdef CONFIG_PM_SLEEP
+void intel_usb_mux_complete(struct device *dev)
+{
+ struct intel_usb_mux *mux = dev_get_drvdata(dev);
+
+ usb_mux_notifier(&mux->nb, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(intel_usb_mux_complete);
+#endif
diff --git a/include/linux/usb/intel-mux.h b/include/linux/usb/intel-mux.h
new file mode 100644
index 0000000..fd5612d
--- /dev/null
+++ b/include/linux/usb/intel-mux.h
@@ -0,0 +1,43 @@
+/**
+ * intel_mux.h - USB Port Mux definitions
+ *
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_INTEL_MUX_H
+#define __LINUX_USB_INTEL_MUX_H
+
+#if IS_ENABLED(CONFIG_INTEL_USB_MUX)
+int intel_usb_mux_bind_cable(struct device *dev, char *extcon_name,
+ char *cable_name,
+ int (*cable_set_cb)(struct device *dev),
+ int (*cable_unset_cb)(struct device *dev));
+int intel_usb_mux_unbind_cable(struct device *dev);
+#ifdef CONFIG_PM_SLEEP
+void intel_usb_mux_complete(struct device *dev);
+#endif
+
+#else
+static inline int
+intel_usb_mux_bind_cable(struct device *dev,
+ char *extcon_name,
+ char *cable_name,
+ int (*cable_set_cb)(struct device *dev),
+ int (*cable_unset_cb)(struct device *dev))
+{
+ return -ENODEV;
+}
+
+static inline int intel_usb_mux_unbind_cable(struct device *dev)
+{
+ return 0;
+}
+#endif /* CONFIG_INTEL_USB_MUX */
+
+#endif /* __LINUX_USB_INTEL_MUX_H */
--
2.1.4