Re: [PATCH] fujitsu-laptop: Support radio LED

[MichaÅ KÄpieÅ]

> Wow, that is a comprehensive explanation.  In principle the patch looks
> good, but I wonder whether the heuristics you have developed for button
> detection needs wider testing.

This is indeed my primary concern.

> I can test on my S7020 but only in a few
> days time (this week is a very busy week) which would give us one more data
> point.

That would be nice, thanks.  The more we know, the better.

> > First of all, this patch raises a couple of checkpatch warnings.
> 
> The code on the whole reads well so I would be happy with it as is.  Making
> it (and the existing code) fully compliant with checkpatch results in harder
> to read code - at least that was the consensus when it was initially merged,
> which is why it was left in the current state.  Darren may have an
> alternative view on this though, in which case I'm happy to defer to his
> preference.

Thanks for the explanation.  It's just something that crossed my mind.

Darren, feel free to let me know if you would like to get this done.

> > As for detecting whether the LED is present on a given machine, I had to
> > resort to educated guesswork.  I assumed this LED is present on all
> > devices which have a radio toggle button instead of a slider.  My
> > Lifebook E744 holds 0x01010001 in BTNI.  By comparing the bits and
> > buttons with those of a Lifebook E8420 (BTNI=0x000F0101, has a slider),
> > I put my money on bit 24 as the indicator of the radio toggle button
> > being present.
> 
> The other question is how consistent the bit layout is across all devices
> which might make use of this driver.  The set of potential devices spans
> nearly 10 years, and in many ways it would be surprising if the bit
> definitions were kept the same over that time.  Testing would be the only
> way to get a feeling for that.

My thoughts exactly.

> If you could let me know how you went about
> acquiring the values on your machine I could try the exact same steps on the
> S7020 to see what we get.

The BTNI value is printed to the kernel log buffer by
acpi_fujitsu_hotkey_add(), so all it takes to retrieve it is:

    dmesg | grep BTNI

> > While it's not essential, it would be nice to initialize soft rfkill
> > state of all radio transmitters to the value of RFSW upon boot.
> 
> I think this would only be necessary for those machines with the RF button
> in place of the hard slider switch, right?

Yes.  On the E8420 I tested, moving the slider switch to "off" position
caused the Bluetooth device to be removed from the system altogether
while iwlwifi reacted by hard-blocking phy0.

> > One last remark is that I think this LED would best be driven by an
> > inverted airplane mode LED trigger ...
> 
> In addition to the button interaction, presumedly.

I wanted to reach three objectives:

 1) make the LED indicate current rfkill state by default,

 2) allow rfkill state to be persisted between reboots on models
    with an rfkill button instead of a slider, preferably also ensuring
    /sys/devices/platform/fujitsu-laptop/radios is always consistent
    with actual rfkill state,

 3) allow the user to freely repurpose the LED to their liking.

To achieve all of the above, I decided to, respectively:

 1) assign the LED to an "inverted airplane mode" trigger by default,

 2) consult rfkill_state upon module initialization and set the soft
    rfkill state for all devices appropriately,

 3) refrain from calling radio_led_set() and/or FUNC_RFKILL with
    argument 0x5 from any function inside fujitsu-laptop.c.

The code which could make the first point happen is not yet merged, so
for now the user would probably have to assign the desired trigger from
userspace.  I also failed to implement the second point within
fujitsu-laptop, so I suggested delegating this task to userspace.  

Could you please explain how the solution you had on your mind compares
to the above?  Are your objectives in line with mine or am I barking up
the wrong tree?

> > And finally, perhaps some of the remarks above belong in the commit
> > message for future reference.  Please advise.
> 
> I think so - there's useful information in there which would be particularly
> relevant if the button detection heuristics ever need to be revised.  Due to
> the necessarily arbitrary feel of the detection logic a brief in-source
> comment may be justified too.

I'll give this some more thought after you test the patch on the S7020.

-- 
Best regards,
MichaÅ KÄpieÅ