[PATCH v3 1/3] scsi: make some Additional Sense strings more grep'able

From: Rasmus Villemoes
Date: Tue Mar 22 2016 - 15:33:12 EST


There's little point in breaking these strings over multiple lines.

Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>
---
drivers/scsi/constants.c | 27 +++++++++------------------
1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index fa09d4be2b53..58d94e3c3713 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -346,11 +346,9 @@ static const struct error_info additional[] =
{0x0407, "Logical unit not ready, operation in progress"},
{0x0408, "Logical unit not ready, long write in progress"},
{0x0409, "Logical unit not ready, self-test in progress"},
- {0x040A, "Logical unit not accessible, asymmetric access state "
- "transition"},
+ {0x040A, "Logical unit not accessible, asymmetric access state transition"},
{0x040B, "Logical unit not accessible, target port in standby state"},
- {0x040C, "Logical unit not accessible, target port in unavailable "
- "state"},
+ {0x040C, "Logical unit not accessible, target port in unavailable state"},
{0x040D, "Logical unit not ready, structure check required"},
{0x040E, "Logical unit not ready, security session in progress"},
{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
@@ -363,11 +361,9 @@ static const struct error_info additional[] =
{0x0417, "Logical unit not ready, calibration required"},
{0x0418, "Logical unit not ready, a door is open"},
{0x0419, "Logical unit not ready, operating in sequential mode"},
- {0x041A, "Logical unit not ready, start stop unit command in "
- "progress"},
+ {0x041A, "Logical unit not ready, start stop unit command in progress"},
{0x041B, "Logical unit not ready, sanitize in progress"},
- {0x041C, "Logical unit not ready, additional power use not yet "
- "granted"},
+ {0x041C, "Logical unit not ready, additional power use not yet granted"},
{0x041D, "Logical unit not ready, configuration in progress"},
{0x041E, "Logical unit not ready, microcode activation required"},
{0x041F, "Logical unit not ready, microcode download required"},
@@ -559,8 +555,7 @@ static const struct error_info additional[] =
{0x2300, "Invalid token operation, cause not reportable"},
{0x2301, "Invalid token operation, unsupported token type"},
{0x2302, "Invalid token operation, remote token usage not supported"},
- {0x2303, "Invalid token operation, remote rod token creation not "
- "supported"},
+ {0x2303, "Invalid token operation, remote rod token creation not supported"},
{0x2304, "Invalid token operation, token unknown"},
{0x2305, "Invalid token operation, token corrupt"},
{0x2306, "Invalid token operation, token revoked"},
@@ -641,8 +636,7 @@ static const struct error_info additional[] =
{0x2A0D, "Data encryption capabilities changed"},
{0x2A10, "Timestamp changed"},
{0x2A11, "Data encryption parameters changed by another i_t nexus"},
- {0x2A12, "Data encryption parameters changed by vendor specific "
- "event"},
+ {0x2A12, "Data encryption parameters changed by vendor specific event"},
{0x2A13, "Data encryption key instance counter has changed"},
{0x2A14, "SA creation capabilities data has changed"},
{0x2A15, "Medium removal prevention preempted"},
@@ -759,8 +753,7 @@ static const struct error_info additional[] =
{0x3B19, "Element enabled"},
{0x3B1A, "Data transfer device removed"},
{0x3B1B, "Data transfer device inserted"},
- {0x3B1C, "Too many logical objects on partition to support "
- "operation"},
+ {0x3B1C, "Too many logical objects on partition to support operation"},

{0x3D00, "Invalid bits in identify message"},

@@ -957,8 +950,7 @@ static const struct error_info additional[] =
{0x5D39, "Data channel impending failure throughput performance"},
{0x5D3A, "Data channel impending failure seek time performance"},
{0x5D3B, "Data channel impending failure spin-up retry count"},
- {0x5D3C, "Data channel impending failure drive calibration retry "
- "count"},
+ {0x5D3C, "Data channel impending failure drive calibration retry count"},
{0x5D40, "Servo impending failure general hard drive failure"},
{0x5D41, "Servo impending failure drive error rate too high"},
{0x5D42, "Servo impending failure data error rate too high"},
@@ -1070,8 +1062,7 @@ static const struct error_info additional[] =

{0x6E00, "Command to logical unit failed"},

- {0x6F00, "Copy protection key exchange failure - authentication "
- "failure"},
+ {0x6F00, "Copy protection key exchange failure - authentication failure"},
{0x6F01, "Copy protection key exchange failure - key not present"},
{0x6F02, "Copy protection key exchange failure - key not established"},
{0x6F03, "Read of scrambled sector without authentication"},
--
2.1.4