Re: usb: gadget breakage on N900: bind UDC by name passed via usb_gadget_driver structure
From: Ruslan Bilovol
Date: Wed Mar 23 2016 - 20:46:14 EST
Hi Pavel,
I didn't use my N900 for years, it is deeply discharged and can't
boot, so I left it connected overnight to the wall adapter to let it
get some juice.
Meanwhile I looked into sources and still can't understand how
it happens.
Could you please attach your full .config and also dmesg
without hacks?
Regards,
Ruslan
On Wed, Mar 23, 2016 at 2:21 PM, Pavel Machek <pavel@xxxxxx> wrote:
> On Mon 2016-03-21 12:51:51, Marek Szyprowski wrote:
>> Hi
>>
>> On 2016-03-18 21:20, Pavel Machek wrote:
>> >Hi!
>> >
>> >>>USB gadget stops working for me on n900, if I merge
>> >>Could you please give us more details?
>> >>Which gadget driver do you use (g_nokia?)
>> >Ok, so I could get it to work with v4.5, and this patch. I'm including
>> >my config, too. No, I don't think I'm using g_nokia.
>>
>> This shows that there are some serious problems, probably with your udc
>> driver, which doesn't handle deferred probe properly. Your patch workaround
>> it by waiting some predefined time before registering gadget driver, however
>> this is not the proper way. Please try to isolate what exactly is needed to
>> get the gadget driver registered properly in your system or at least please
>> provide some logs from the failed case.
>
> Well, Ruslan said he has n900 available, so I provided requested
> information.
>
> This is the dmesg with the hack:
>
> [ 0.623138] of_get_named_gpiod_flags: parsed 'ti,power-gpio'
> property of node '/ocp/spi@480ba00
> 0/wl1251@0[0]' - status (0)
> [ 0.623565] wl1251: ERROR vio regulator missing: -517
> [ 0.624359] musb probe HACK cf9a9e00
> [ 0.624420] musb probe HACK/2 cf9a9e00
> [ 0.624511] musb probe HACK/3 cf9a9e00
> [ 0.624755] HS USB OTG: no transceiver configured
> [ 0.624847] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
> with status -517
> [ 0.626525] mousedev: PS/2 mouse device common for all mice
> ...
> [ 2.877441] ieee80211 phy1: Selected rate control algorithm
> 'minstrel'
> [ 2.879882] wl1251: loaded
> [ 2.889617] wl1251: initialized
> [ 2.897521] Two musb controllers? HACK
> [ 2.904968] musb probe HACK cf9a9e00
> [ 2.912048] musb probe HACK/2 cf9a9e00
> [ 2.918823] musb probe HACK/3 cf9a9e00
> [ 2.928985] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk
> combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
> [ 2.929016] musb-hdrc: MHDRC RTL version 1.400
> [ 2.929046] musb-hdrc: setup fifo_mode 4
> [ 2.929077] musb-hdrc: 28/31 max ep, 16384/16384 memory
> [ 2.930511] tsc2005 spi1.0: GPIO lookup for consumer reset
> [ 2.930541] tsc2005 spi1.0: using device tree for GPIO lookup
>
> In the kernel without the hack, there'll be only the first part of the
> dmesg, AFAICT.
>
> If there's an interest, I can repeat the test without the hack.
>
> Thanks,
> Pavel
>
>
>> >diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
>> >index b86a6f0..bee109f 100644
>> >--- a/drivers/usb/gadget/udc/udc-core.c
>> >+++ b/drivers/usb/gadget/udc/udc-core.c
>> >@@ -542,14 +542,37 @@ err1:
>> > return ret;
>> > }
>> >-int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
>> >+int usb_udc_attach_driver(const char *name, struct usb_gadget_driver *driver)
>> >+{
>> >+ struct usb_udc *udc = NULL;
>> >+ int ret = -ENODEV;
>> >+
>> >+ mutex_lock(&udc_lock);
>> >+ list_for_each_entry(udc, &udc_list, list) {
>> >+ ret = strcmp(name, dev_name(&udc->dev));
>> >+ if (!ret)
>> >+ break;
>> >+ }
>> >+ if (ret) {
>> >+ ret = -ENODEV;
>> >+ goto out;
>> >+ }
>> >+ if (udc->driver) {
>> >+ ret = -EBUSY;
>> >+ goto out;
>> >+ }
>> >+ ret = udc_bind_to_driver(udc, driver);
>> >+out:
>> >+ mutex_unlock(&udc_lock);
>> >+ return ret;
>> >+}
>> >+EXPORT_SYMBOL_GPL(usb_udc_attach_driver);
>> >+
>> >+int __usb_gadget_probe_driver(struct usb_gadget_driver *driver)
>> > {
>> > struct usb_udc *udc = NULL;
>> > int ret = -ENODEV;
>> >- if (!driver || !driver->bind || !driver->setup)
>> >- return -EINVAL;
>> >-
>> > mutex_lock(&udc_lock);
>> > if (driver->udc_name) {
>> > list_for_each_entry(udc, &udc_list, list) {
>> >@@ -567,16 +590,47 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
>> > }
>> > }
>> >- list_add_tail(&driver->pending, &gadget_driver_pending_list);
>> >+// list_add_tail(&driver->pending, &gadget_driver_pending_list); FIXME
>> > pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
>> > driver->function);
>> >+
>> > mutex_unlock(&udc_lock);
>> >- return 0;
>> >+ return ret;
>> > found:
>> > ret = udc_bind_to_driver(udc, driver);
>> > mutex_unlock(&udc_lock);
>> > return ret;
>> > }
>> >+
>> >+#define USB_GADGET_BIND_RETRIES 5
>> >+#define USB_GADGET_BIND_TIMEOUT (3 * HZ)
>> >+static void usb_gadget_work(struct work_struct *work)
>> >+{
>> >+ struct usb_gadget_driver *driver = container_of(work,
>> >+ struct usb_gadget_driver,
>> >+ work.work);
>> >+ int res;
>> >+
>> >+ if (driver->retries++ > USB_GADGET_BIND_RETRIES) {
>> >+ pr_err("couldn't find an available UDC\n");
>> >+ return;
>> >+ }
>> >+
>> >+ res = __usb_gadget_probe_driver(driver);
>> >+ if (res == -ENODEV)
>> >+ schedule_delayed_work(&driver->work, USB_GADGET_BIND_TIMEOUT);
>> >+}
>> >+
>> >+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
>> >+{
>> >+ if (!driver || !driver->bind || !driver->setup)
>> >+ return -EINVAL;
>> >+
>> >+ INIT_DELAYED_WORK(&driver->work, usb_gadget_work);
>> >+ schedule_delayed_work(&driver->work, 0);
>> >+
>> >+ return 0;
>> >+}
>> > EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
>> > int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
>> >@@ -587,6 +641,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
>> > if (!driver || !driver->unbind)
>> > return -EINVAL;
>> >+ cancel_delayed_work(&driver->work);
>> >+
>> > mutex_lock(&udc_lock);
>> > list_for_each_entry(udc, &udc_list, list)
>> > if (udc->driver == driver) {
>> >@@ -747,7 +803,7 @@ static int __init usb_udc_init(void)
>> > udc_class->dev_uevent = usb_udc_uevent;
>> > return 0;
>> > }
>> >-subsys_initcall(usb_udc_init);
>> >+late_initcall_sync(usb_udc_init);
>> > static void __exit usb_udc_exit(void)
>> > {
>> >diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
>> >index d82d006..adb1e68 100644
>> >--- a/include/linux/usb/gadget.h
>> >+++ b/include/linux/usb/gadget.h
>> >@@ -1014,6 +1014,8 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget)
>> > * @resume: Invoked on USB resume. May be called in_interrupt.
>> > * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers
>> > * and should be called in_interrupt.
>> >+ * @work: Gadget work used to bind to the USB controller.
>> >+ * @retries: Gadget retries to bind to the USB controller.
>> > * @driver: Driver model state for this driver.
>> > * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL,
>> > * this driver will be bound to any available UDC.
>> >@@ -1075,6 +1077,8 @@ struct usb_gadget_driver {
>> > void (*suspend)(struct usb_gadget *);
>> > void (*resume)(struct usb_gadget *);
>> > void (*reset)(struct usb_gadget *);
>> >+ struct delayed_work work;
>> >+ int retries;
>> > /* FIXME support safe rmmod */
>> > struct device_driver driver;
>> >
>>
>> Best regards
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html