Re: [PATCH] usb: dwc2: do not override forced dr_mode in gadget setup

From: John Youn
Date: Thu Mar 24 2016 - 17:21:46 EST


On 3/16/2016 3:10 PM, Przemek Rudy wrote:
> The host/device mode set with dr_mode should be kept all the time,
> not being changed to OTG in gadget setup (by overriding CFGUSB_FORCEDEVMODE
> and CFGUSB_FORCEHOSTMODE bits).
>
> Signed-off-by: Przemek Rudy <prudy1@xxxxx>
> ---
> drivers/usb/dwc2/gadget.c | 23 ++++++++++++++++++-----
> 1 file changed, 18 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index e9940dd..818f158 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -2254,6 +2254,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
> {
> u32 intmsk;
> u32 val;
> + u32 usbcfg;
>
> /* Kill any ep0 requests as controller will be reinitialized */
> kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
> @@ -2267,10 +2268,16 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
> * set configuration.
> */
>
> + /* keep other bits untouched (so e.g. forced modes are not lost) */
> + usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> + usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
> + GUSBCFG_HNPCAP);
> +
> /* set the PLL on, remove the HNP/SRP and set the PHY */
> val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
> - dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> - (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG);
> + usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> + (val << GUSBCFG_USBTRDTIM_SHIFT);
> + dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>
> dwc2_hsotg_init_fifo(hsotg);
>
> @@ -3031,6 +3038,7 @@ static struct usb_ep_ops dwc2_hsotg_ep_ops = {
> static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
> {
> u32 trdtim;
> + u32 usbcfg;
> /* unmask subset of endpoint interrupts */
>
> dwc2_writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
> @@ -3054,11 +3062,16 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
>
> dwc2_hsotg_init_fifo(hsotg);
>
> + /* keep other bits untouched (so e.g. forced modes are not lost) */
> + usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> + usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
> + GUSBCFG_HNPCAP);
> +
> /* set the PLL on, remove the HNP/SRP and set the PHY */
> trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
> - dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> - (trdtim << GUSBCFG_USBTRDTIM_SHIFT),
> - hsotg->regs + GUSBCFG);
> + usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> + (trdtim << GUSBCFG_USBTRDTIM_SHIFT);
> + dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>
> if (using_dma(hsotg))
> __orr32(hsotg->regs + GAHBCFG, GAHBCFG_DMA_EN);
>


Acked-by: John Youn <johnyoun@xxxxxxxxxxxx>
Tested-by: John Youn <johnyoun@xxxxxxxxxxxx>

Regards,
John