Re: [PATCH v3 01/16] dt: davinci: use proper address after @

[Sergei Shtylyov]

Hello.

On 03/25/2016 06:13 PM, Rob Herring wrote:

> > > TI has been using the physical address in DT after the @ in device nodes.
> > > The device tree convention is to use the same address that is used for
> > > the reg property. This updates all davinci DT files to use the proper
> > > convention.
> > >
> > > Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
> >
> > [...]
> >
> > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> > > index 226cda7..4294849 100644
> > > --- a/arch/arm/boot/dts/da850.dtsi
> > > +++ b/arch/arm/boot/dts/da850.dtsi
> > > @@ -15,7 +15,7 @@
> > >                  #address-cells = <1>;
> > >                  #size-cells = <1>;
> > >                  ranges;
> > > -               intc: interrupt-controller {
> > > +               intc: interrupt-controller@fffee000 {
> > >                          compatible = "ti,cp-intc";
> > >                          interrupt-controller;
> > >                          #interrupt-cells = <1>;
> > > @@ -23,7 +23,7 @@
> > >                          reg = <0xfffee000 0x2000>;
> > >                  };
> > >          };
> > > -       soc {
> > > +       soc@1c00000 {
> >
> >
> >     This node doesn't have the "reg" prop.

> But probably has a ranges property which is correct.

   Yes, it does. Didn't know that "ranges" can be used that way, thanks...

> Rob

MBR, Sergei