Re: [PATCH 1/2] iio:adc:at91-sama5d2: cleanup mode register use

[Jonathan Cameron]

On 22/03/16 16:08, Ludovic Desroches wrote:
> Do not erase previous configuration of the mode register when setting
> the sampling frequency.
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
Applied.
> ---
>  drivers/iio/adc/at91-sama5d2_adc.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> index 5bc038f..01ba106 100644
> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> @@ -66,8 +66,10 @@
>  #define	AT91_SAMA5D2_MR_PRESCAL(v)	((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET)
>  #define	AT91_SAMA5D2_MR_PRESCAL_OFFSET	8
>  #define	AT91_SAMA5D2_MR_PRESCAL_MAX	0xff
> +#define AT91_SAMA5D2_MR_PRESCAL_MASK	GENMASK(15, 8)
>  /* Startup Time */
>  #define	AT91_SAMA5D2_MR_STARTUP(v)	((v) << 16)
> +#define AT91_SAMA5D2_MR_STARTUP_MASK	GENMASK(19, 16)
>  /* Analog Change */
>  #define	AT91_SAMA5D2_MR_ANACH		BIT(23)
>  /* Tracking Time */
> @@ -226,7 +228,7 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min,
>  static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
>  {
>  	struct iio_dev *indio_dev = iio_priv_to_dev(st);
> -	unsigned f_per, prescal, startup;
> +	unsigned f_per, prescal, startup, mr;
>  
>  	f_per = clk_get_rate(st->per_clk);
>  	prescal = (f_per / (2 * freq)) - 1;
> @@ -234,10 +236,11 @@ static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
>  	startup = at91_adc_startup_time(st->soc_info.startup_time,
>  					freq / 1000);
>  
> -	at91_adc_writel(st, AT91_SAMA5D2_MR,
> -			AT91_SAMA5D2_MR_TRANSFER(2)
> -			| AT91_SAMA5D2_MR_STARTUP(startup)
> -			| AT91_SAMA5D2_MR_PRESCAL(prescal));
> +	mr = at91_adc_readl(st, AT91_SAMA5D2_MR);
> +	mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK);
> +	mr |= AT91_SAMA5D2_MR_STARTUP(startup);
> +	mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
> +	at91_adc_writel(st, AT91_SAMA5D2_MR, mr);
>  
>  	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
>  		freq, startup, prescal);
> @@ -444,6 +447,8 @@ static int at91_adc_probe(struct platform_device *pdev)
>  
>  	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
>  	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
> +	/* Transfer field must be set to 2 according to the datasheet. */
> +	at91_adc_writel(st, AT91_SAMA5D2_MR, AT91_SAMA5D2_MR_TRANSFER(2));
>  
>  	at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
>  
>