Re: [PATCH 1/2] mmc: dw_mmc: fix warning reported by kernel-doc

[Jaehoon Chung]

Hi Shawn,

Sorry for applying late.
Applied on my repository.

Best Regards,
Jaehoon Chung

On 03/09/2016 11:33 AM, Shawn Lin wrote:
> Try to fix the warning reported by:
> scripts/kernel-doc -man -v include/linux/mmc/dw_mmc.h > /dev/null
> 
> warning: No description found for parameter 'irq_lock'
> warning: No description found for parameter 'stop_abort'
> warning: No description found for parameter 'prev_blksz'
> warning: No description found for parameter 'timing'
> warning: No description found for parameter 'ring_size'
> warning: No description found for parameter 'dms'
> warning: No description found for parameter 'phy_regs'
> warning: No description found for parameter 'fifoth_val'
> warning: No description found for parameter 'vqmmc_enabled'
> warning: No description found for parameter 'cmd11_timer'
> warning: Excess struct/union/enum/typedef member 'card_tasklet'
> description in 'dw_mci'
> 
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> ---
> 
>  include/linux/mmc/dw_mmc.h | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 7b41c6d..c8b6a4d 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -55,6 +55,7 @@ struct dw_mci_dma_slave {
>  /**
>   * struct dw_mci - MMC controller state shared between all slots
>   * @lock: Spinlock protecting the queue and associated data.
> + * @irq_lock: Spinlock protecting the INTMASK setting.
>   * @regs: Pointer to MMIO registers.
>   * @fifo_reg: Pointer to MMIO registers for data FIFO
>   * @sg: Scatterlist entry currently being processed by PIO code, if any.
> @@ -65,6 +66,9 @@ struct dw_mci_dma_slave {
>   * @cmd: The command currently being sent to the card, or NULL.
>   * @data: The data currently being transferred, or NULL if no data
>   *	transfer is in progress.
> + * @stop_abort: The command currently prepared for stoping transfer.
> + * @prev_blksz: The former transfer blksz record.
> + * @timing: Record of current ios timing.
>   * @use_dma: Whether DMA channel is initialized or not.
>   * @using_dma: Whether DMA is in use for the current transfer.
>   * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
> @@ -72,7 +76,10 @@ struct dw_mci_dma_slave {
>   * @sg_cpu: Virtual address of DMA buffer.
>   * @dma_ops: Pointer to platform-specific DMA callbacks.
>   * @cmd_status: Snapshot of SR taken upon completion of the current
> + * @ring_size: Buffer size for idma descriptors.
>   *	command. Only valid when EVENT_CMD_COMPLETE is pending.
> + * @dms: structure of slave-dma private data.
> + * @phy_regs: physical address of controller's register map
>   * @data_status: Snapshot of SR taken upon completion of the current
>   *	data transfer. Only valid when EVENT_DATA_COMPLETE or
>   *	EVENT_DATA_ERROR is pending.
> @@ -80,7 +87,6 @@ struct dw_mci_dma_slave {
>   *	to be sent.
>   * @dir_status: Direction of current transfer.
>   * @tasklet: Tasklet running the request state machine.
> - * @card_tasklet: Tasklet handling card detect.
>   * @pending_events: Bitmask of events flagged by the interrupt handler
>   *	to be processed by the tasklet.
>   * @completed_events: Bitmask of events which the state machine has
> @@ -91,6 +97,7 @@ struct dw_mci_dma_slave {
>   *	rate and timeout calculations.
>   * @current_speed: Configured rate of the controller.
>   * @num_slots: Number of slots available.
> + * @fifoth_val: The value of FIFOTH register.
>   * @verid: Denote Version ID.
>   * @dev: Device associated with the MMC controller.
>   * @pdata: Platform data associated with the MMC controller.
> @@ -107,9 +114,11 @@ struct dw_mci_dma_slave {
>   * @push_data: Pointer to FIFO push function.
>   * @pull_data: Pointer to FIFO pull function.
>   * @quirks: Set of quirks that apply to specific versions of the IP.
> + * @vqmmc_enabled: Status of vqmmc, should be true or false.
>   * @irq_flags: The flags to be passed to request_irq.
>   * @irq: The irq value to be passed to request_irq.
>   * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
> + * @cmd11_timer: Timer for SD3.0 voltage switch over scheme.
>   * @dto_timer: Timer for broken data transfer over scheme.
>   *
>   * Locking
>