Re: [PATCHv3 9/9] ARM: dts: Add Altera Arria10 L2 Cache EDAC devicetree entry

[Dinh Nguyen]

Hi Boris,


On Tue, Mar 29, 2016 at 3:45 AM, Borislav Petkov <bp@xxxxxxxxx> wrote:
> On Mon, Mar 21, 2016 at 11:01:46AM -0500, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
>> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
>>
>> Add the device tree entries needed to support the Altera L2
>> cache EDAC on the Arria10 chip.
>>
>> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
>> ---
>> v2 Match register value (l2-ecc@ffd06010)
>> v3 Set ecc_manager to beginning of system_manager. Add sysman
>>    phandle. Move IRQs into ecc_manager from children.
>> ---
>>  arch/arm/boot/dts/socfpga_arria10.dtsi |   15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
>> index cce9e50..345ea97 100644
>> --- a/arch/arm/boot/dts/socfpga_arria10.dtsi
>> +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
>> @@ -599,6 +599,21 @@
>>                       reg = <0xffe00000 0x40000>;
>>               };
>>
>> +             eccmgr: eccmgr@ffd06000 {
>> +                     compatible = "altr,socfpga-a10-ecc-manager";
>> +                     altr,sysmgr-syscon = <&sysmgr>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
>> +                                  <0 0 IRQ_TYPE_LEVEL_HIGH>;
>> +                     ranges;
>> +
>> +                     l2-ecc@ffd06010 {
>> +                             compatible = "altr,socfpga-a10-l2-ecc";
>> +                             reg = <0xffd06010 0x4>;
>> +                     };
>> +             };
>> +
>>               rst: rstmgr@ffd05000 {
>>                       #reset-cells = <1>;
>>                       compatible = "altr,rst-mgr";
>> --
>
> I've picked up all except this one: need an ACK for it too. Dinh, DT-people?
>

If you don't mind, I can take this patch. This will prevent merge
conflicts in the
DTS board files.

Thanks,
Dinh