Re: [PATCH 00/12] ARM: dts: Add dragonboard-600c support.

From: Bjorn Andersson
Date: Tue Mar 29 2016 - 10:54:57 EST


On Wed 23 Mar 12:46 PDT 2016, Srinivas Kandagatla wrote:

> Hi Andy,
>
> This patchset adds support to Dragonboard 600c which is based on APQ8064.
>
> With this patchset, except spi I was able to test all the below features
> on this board on top of linus master branch.
> 1> i2c
> 2> spi
> 3> sd/mmc with card detect
> 4> eMMC
> 5> USB
> 6> SATA
> 7> on board Ethernet based on PCIE.
> 8> user and activity leds.
>
> AHCI SATA is broken on APQ8064 on mainline, due to changes in libahci, fix is
> being discussed which should not effect this dt patches anyway.
> This patchset also has a fix to i2c/spi pinctrls which was not set correctly
> in my previous apq8064 patches, I have verified this patchset with eeprom and
> sensors on the board, you might want to take that patch in next rc.
>
> Thanks,
> srini
>
> Srinivas Kandagatla (12):
> ARM: dts: apq8064: fix the pinctrls for i2c and spi
> ARM: dts: apq8064: add support to gsbi1 uart
> ARM: dts: apq8064: add gsbi7 i2c support
> ARM: dts: dragonboard-600c: add board support with serial
> ARM: dts: dragonboard-600c: add pmic regulator supplies
> ARM: dts: dragonboard-600c: Add eMMC and SD card support
> ARM: dts: dragonboard-600c: add usb support
> ARM: dts: dragonboard-600c: add pcie support
> ARM: dts: dragonboard-600c: add on board sata support.
> ARM: dts: dragonboard-600c: Add on board leds support
> ARM: dts: dragonboard-600c: add i2c support
> ARM: dts: dragonboard-600c: add spi support

Please abbreviate db600c (and drop those upper case As).

>
> arch/arm/boot/dts/Makefile | 1 +
> .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 377 +++++++++++++++++++++

Please make this qcom-apq8064-arrow-db600c.dts

> arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 39 +++
> arch/arm/boot/dts/qcom-apq8064.dtsi | 41 ++-
> 4 files changed, 452 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts

Regards,
Bjorn