Re: [PATCH] tty: amba-pl011: Use 32-bit accesses for SBSA UART

[Christopher Covington]

Hi Greg,

On 03/15/2016 06:08 AM, Andre Przywara wrote:
> Hi Christopher,
> 
> On 11/03/16 06:35, Christopher Covington wrote:
>> Version 2 of the Server Base System Architecture (SBSAv2) describes the
>> Generic UART registers as 32 bits wide. At least one implementation, found
>> on the Qualcomm Technologies QDF2432, only supports 32 bit accesses.
>> SBSAv3, which describes supported access sizes in greater detail,
>> explicitly requires support for both 16 and 32 bit accesses to all
>> registers (and 8 bit accesses to some but not all). Therefore, for broad
>> compatibility, simply use 32 bit accessors for the SBSA UART.
>>
>> Tested-by: Mark Langsdorf <mlangsdo@xxxxxxxxxx>
>> Signed-off-by: Christopher Covington <cov@xxxxxxxxxxxxxx>
> 
> So I gave this a try on a Juno and a Midway. Both have a normal PL011,
> but I changed the DT to advertise an SBSA UART instead.
> This worked fine with the 32bit accessors.
> Also according to some research on the hardware size at least the
> current ARM PL011 implementation are totally fine with 32-bit (as well
> as 16-bit) accesses.
> There is some reluctance about whether this is true for _every_ older
> PL011 implementation, but they are out of scope here, as we are talking
> about the SBSA only.
> So:
> 
> Tested-by: Andre Przywara <andre.przywara@xxxxxxx>
> Acked-by: Andre Przywara <andre.przywara@xxxxxxx>
> 
> You can add Juno and Midway to the list of tested systems.

>> Changes new in v2:

Apologies for omitting the v2 prefix in the second version of the patch
that I sent out.

>> * Fixed from address
>> * Elaborated on forward (SBSAv3) compatibility in commit message
>> * Included Mark Langsdorf's Tested-by, which now covers:
>>     QDF2432
>>     Seattle
>>     X-Gene 1

>> ---
>>  drivers/tty/serial/amba-pl011.c | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
>> index c0da0cc..ffb5eb8 100644
>> --- a/drivers/tty/serial/amba-pl011.c
>> +++ b/drivers/tty/serial/amba-pl011.c
>> @@ -121,6 +121,7 @@ static struct vendor_data vendor_arm = {
>>  
>>  static struct vendor_data vendor_sbsa = {
>>  	.reg_offset		= pl011_std_offsets,
>> +	.access_32b		= true,
>>  	.oversampling		= false,
>>  	.dma_threshold		= false,
>>  	.cts_event_workaround	= false,
>>

Do you consider this patch suitable to be included in a 4.6 release
candidate? It fixes an issue running this driver on certain hardware,
and with gracious assistance we've performed due diligence to check that
it does not adversely affect the driver running on other hardware. Would
it be useful to send a v3 collecting the acks and tested-bys?

Thanks,
Christopher Covington

-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project