[PATCH v5 46/50] mtd: nand: qcom: switch to mtd_ooblayout_ops

From: Boris Brezillon
Date: Wed Mar 30 2016 - 12:26:20 EST


Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Tested-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
drivers/mtd/nand/qcom_nandc.c | 79 +++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 45 deletions(-)

diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index 012c202..8c3db3c 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -1708,61 +1708,52 @@ static void qcom_nandc_select_chip(struct mtd_info *mtd, int chipnr)
* This layout is read as is when ECC is disabled. When ECC is enabled, the
* inaccessible Bad Block byte(s) are ignored when we write to a page/oob,
* and assumed as 0xffs when we read a page/oob. The ECC, unused and
- * dummy/real bad block bytes are grouped as ecc bytes in nand_ecclayout (i.e,
- * ecc->bytes is the sum of the three).
+ * dummy/real bad block bytes are grouped as ecc bytes (i.e, ecc->bytes is
+ * the sum of the three).
*/
-
-static struct nand_ecclayout *
-qcom_nand_create_layout(struct qcom_nand_host *host)
+static int qcom_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
{
- struct nand_chip *chip = &host->chip;
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- struct nand_ecclayout *layout;
- int i, j, steps, pos = 0, shift = 0;

- layout = devm_kzalloc(nandc->dev, sizeof(*layout), GFP_KERNEL);
- if (!layout)
- return NULL;
+ if (section > 1)
+ return -ERANGE;

- steps = mtd->writesize / ecc->size;
- layout->eccbytes = steps * ecc->bytes;
-
- layout->oobfree[0].offset = (steps - 1) * ecc->bytes + host->bbm_size;
- layout->oobfree[0].length = steps << 2;
-
- /*
- * the oob bytes in the first n - 1 codewords are all grouped together
- * in the format:
- * DUMMY_BBM + UNUSED + ECC
- */
- for (i = 0; i < steps - 1; i++) {
- for (j = 0; j < ecc->bytes; j++)
- layout->eccpos[pos++] = i * ecc->bytes + j;
+ if (!section) {
+ oobregion->length = (ecc->bytes * (ecc->steps - 1)) +
+ host->bbm_size;
+ oobregion->offset = 0;
+ } else {
+ oobregion->length = host->ecc_bytes_hw + host->spare_bytes;
+ oobregion->offset = mtd->oobsize - oobregion->length;
}

- /*
- * the oob bytes in the last codeword are grouped in the format:
- * BBM + FREE OOB + UNUSED + ECC
- */
+ return 0;
+}

- /* fill up the bbm positions */
- for (j = 0; j < host->bbm_size; j++)
- layout->eccpos[pos++] = i * ecc->bytes + j;
+static int qcom_nand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;

- /*
- * fill up the ecc and reserved positions, their indices are offseted
- * by the free oob region
- */
- shift = layout->oobfree[0].length + host->bbm_size;
+ if (section)
+ return -ERANGE;

- for (j = 0; j < (host->ecc_bytes_hw + host->spare_bytes); j++)
- layout->eccpos[pos++] = i * ecc->bytes + shift + j;
+ oobregion->length = ecc->steps * 4;
+ oobregion->offset = ((ecc->steps - 1) * ecc->bytes) + host->bbm_size;

- return layout;
+ return 0;
}

+static const struct mtd_ooblayout_ops qcom_nand_ooblayout_ops = {
+ .ecc = qcom_nand_ooblayout_ecc,
+ .free = qcom_nand_ooblayout_free,
+};
+
static int qcom_nand_host_setup(struct qcom_nand_host *host)
{
struct nand_chip *chip = &host->chip;
@@ -1849,9 +1840,7 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)

ecc->mode = NAND_ECC_HW;

- ecc->layout = qcom_nand_create_layout(host);
- if (!ecc->layout)
- return -ENOMEM;
+ mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);

cwperpage = mtd->writesize / ecc->size;

--
2.5.0