[PATCH v4 3/9] clk: samsung: exynos3250: Add UART2 clock

From: Chanwoo Choi
Date: Wed Mar 30 2016 - 22:48:27 EST


From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>

This patch add the UART2 clocks (mux, divider, gate) of Exynos3250 SoC.

Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
drivers/clk/samsung/clk-exynos3250.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
index fdd41b17a24f..bc60e399d1bc 100644
--- a/drivers/clk/samsung/clk-exynos3250.c
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -306,6 +306,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),

/* SRC_PERIL0 */
+ MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4),
MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),

@@ -390,6 +391,7 @@ static struct samsung_div_clock div_clks[] __initdata = {
DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),

/* DIV_PERIL0 */
+ DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),

@@ -552,6 +554,9 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+
+ GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
+ GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
@@ -649,6 +654,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+ GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0),
GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
};
--
1.9.1