Re: [RFT PATCH 0/4] usb: dwc2: Fix core reset and force mode delay problems

[Stefan Wahren]

Hi John,

Am 29.03.2016 um 04:36 schrieb John Youn:
> Hi,
>
> The following patch series addresses the core reset and force mode
> delay problems we have been seeing on dwc2 for some platforms.
>
> I think I have identified the source of the inconsistencies between
> platforms and this series attempts to address them.
>
> Basically everything stems from the IDDIG debounce filter delay, which
> is a function of the PHY clock speed and can range from 5-50 ms if
> enabled. This delay must be taken into account on core reset and force
> modes. A full explanation is provided in the patch commit log and code
> comments.
>
> The first two patches are prerequisites to the force mode fixes,
> including one patch that was sent separately by Przemek Rudy. I have
> resubmitted it with this series for convenience.
>
> Please help by reviewing and testing on your platforms.
>
> Patches were tested on:
> * Synopsys HAPS platform IP 3.20a OTG, dr_mode=OTG,HOST,PERIPHERAL

i applied the complete patch series on 4.6rc-1 and successfully tested
it with my Raspberry Pi B (IP 2.80a, dr_mode=HOST).

Probing and usual USB devices (network, keyboard) still works fine.

Do you need any other specific tests?

Regards
Stefan


>
> Regards,
> John
>
> John Youn (3):
>   usb: dwc2: gadget: Only initialize device if in device mode
>   usb: dwc2: Add delay to core soft reset
>   usb: dwc2: Properly account for the force mode delays
>
> Przemek Rudy (1):
>   usb: dwc2: do not override forced dr_mode in gadget setup
>
>  drivers/usb/dwc2/core.c     | 195 ++++++++++++++++++++++++++++----------------
>  drivers/usb/dwc2/core.h     |   2 +-
>  drivers/usb/dwc2/gadget.c   |  30 +++++--
>  drivers/usb/dwc2/hcd.c      |   6 +-
>  drivers/usb/dwc2/hw.h       |   1 +
>  drivers/usb/dwc2/platform.c |   9 +-
>  6 files changed, 161 insertions(+), 82 deletions(-)
>