Re: [PATCH 1/2] regulator: DT: Add support to scale ramp delay based on platform behavior

[Laxman Dewangan]

On Thursday 31 March 2016 10:21 PM, Mark Brown wrote:
> * PGP Signed by an unknown key
>
> On Thu, Mar 31, 2016 at 12:36:08PM +0530, Laxman Dewangan wrote:
> > On Wednesday 30 March 2016 11:46 PM, Mark Brown wrote:
> > > > Like to add property as "regulator-device-ramp-delay" which will be used for
> > > > PMIC configuration and regulator-ramp-delay will be used for delay
> > > > calculation. This is case when advertised ramp delay does not match with the
> > > > platform measured ramp delay.
> > > Why -device?
> > This is device specific and just to differentiate with regulator-ramp-delay
> > which is the platform specific.
> > May be there is some other good name. I can think of other name as
> > regulator-typical-ramp-delay, regulator-advertised-ramp-delay etc.
> So there's already a property you want to set, why are you not trying to
> set that property?

We need two properties, one what we measured in platform and second one 
for what we want to program PMIC. This is for the case where vendor 
advertised ramp delay is not same as measured due to platform design.
Based on discussion, regulator-ramp-delay is for measured ramp delay in 
platform. So we will need another property for configuring PMIC.