[PATCH net-next v2 5/6] net: dsa: mv88e6xxx: map destination addresses for 6185

[Vivien Didelot]

The 88E6185 switch also has a MapDA bit in its Port Control 2 register.
When this bit is cleared, all frames are sent out to the CPU port.

Set this bit to rely on address databases (ATU) hits and direct frames
out of the correct ports, and thus allow hardware bridging.

Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/net/dsa/mv88e6xxx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 52c3e17..56f5657 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -2455,7 +2455,8 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port)
 	reg = 0;
 	if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
 	    mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
-	    mv88e6xxx_6095_family(ds) || mv88e6xxx_6320_family(ds))
+	    mv88e6xxx_6095_family(ds) || mv88e6xxx_6320_family(ds) ||
+	    mv88e6xxx_6185_family(ds))
 		reg = PORT_CONTROL_2_MAP_DA;
 
 	if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
-- 
2.7.4