Re: [PATCH 3/8] mfd: twl-core: Rename TWL4030_CORE Kconfig option to TWL_CORE

From: Paul Kocialkowski
Date: Sat Apr 02 2016 - 16:13:13 EST

Next message: Andy Lutomirski: "Re: [PATCH v5 3/9] x86/head: Move early exception panic code into early_fixup_exception"
Previous message: Paul Kocialkowski: "Re: [PATCH 2/2] ARM: OMAP4: Store reboot mode to SAR scratchpad memory before restart"
Next in thread: Grygorii Strashko: "Re: [PATCH 3/8] mfd: twl-core: Rename TWL4030_CORE Kconfig option to TWL_CORE"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Le mercredi 30 mars 2016 Ã 18:34 +0300, Grygorii Strashko a ÃcritÂ:
> On 03/29/2016 10:22 PM, Paul Kocialkowski wrote:
> >
> > Since the twl-core mfd driver is not limited to twl4030 support, but also
> > supports other chips of the TWL family, it makes sense to rename its
> > matching
> > Kconfig opton to a non-model-specific name.
>
> Personally I don't see too much reason for this, but it's up to maintainers to
> decide.

I'm a strong advocate of consistency in naming and using twl4030 prefixes for
drivers that are common to more twl chips looks very inconsistent to me.
Besides, some common twl drivers are already using the twl prefix, so this can
also be seen as harmonisation.

> Regarding this patch - pls, do not mix Kconfig and code changes.

Do you mean that for code changes that are directly affected by Kconfig changes
(e.g. #ifdef CONFIG_)? Is the policy that "each commit must produce a working
result" or is it okay to break drivers in between commits of the same series?

> And it will be good to have cover letter.

Noted, I'll come up with something for v2.

> > Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> > ---
> > Â arch/arm/mach-omap2/KconfigÂÂÂÂÂ| 2 +-
> > Â arch/arm/mach-omap2/MakefileÂÂÂÂ| 2 +-
> > Â arch/arm/mach-omap2/pm.hÂÂÂÂÂÂÂÂ| 2 +-
> > Â arch/arm/plat-omap/KconfigÂÂÂÂÂÂ| 2 +-
> > Â drivers/gpio/KconfigÂÂÂÂÂÂÂÂÂÂÂÂ| 2 +-
> > Â drivers/iio/adc/KconfigÂÂÂÂÂÂÂÂÂ| 4 ++--
> > Â drivers/input/keyboard/KconfigÂÂ| 2 +-
> > Â drivers/input/misc/KconfigÂÂÂÂÂÂ| 4 ++--
> > Â drivers/mfd/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂ| 6 +++---
> > Â drivers/mfd/MakefileÂÂÂÂÂÂÂÂÂÂÂÂ| 2 +-
> > Â drivers/mfd/twl4030-irq.cÂÂÂÂÂÂÂ| 6 +++---
> > Â drivers/phy/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂ| 2 +-
> > Â drivers/power/KconfigÂÂÂÂÂÂÂÂÂÂÂ| 2 +-
> > Â drivers/pwm/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂ| 4 ++--
> > Â drivers/regulator/KconfigÂÂÂÂÂÂÂ| 2 +-
> > Â drivers/rtc/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂ| 2 +-
> > Â drivers/usb/phy/KconfigÂÂÂÂÂÂÂÂÂ| 2 +-
> > Â drivers/video/backlight/Kconfig | 2 +-
> > Â drivers/watchdog/KconfigÂÂÂÂÂÂÂÂ| 2 +-
> > Â include/linux/i2c/twl.hÂÂÂÂÂÂÂÂÂ| 4 ++--
> > Â sound/soc/codecs/KconfigÂÂÂÂÂÂÂÂ| 2 +-
> > Â sound/soc/omap/KconfigÂÂÂÂÂÂÂÂÂÂ| 4 ++--
> > Â 22 files changed, 31 insertions(+), 31 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> > index 0517f0c..ada4c7a1 100644
> > --- a/arch/arm/mach-omap2/Kconfig
> > +++ b/arch/arm/mach-omap2/Kconfig
> > @@ -124,7 +124,7 @@ config ARCH_OMAP2PLUS_TYPICAL
> > ÂÂ select PM
> > ÂÂ select REGULATOR
> > ÂÂ select REGULATOR_FIXED_VOLTAGE
> > - select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
> > + select TWL_CORE if ARCH_OMAP3 || ARCH_OMAP4
> > ÂÂ select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
> > ÂÂ select VFP
> > ÂÂ help
> > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> > index 0ba6a0e..6eb680a 100644
> > --- a/arch/arm/mach-omap2/Makefile
> > +++ b/arch/arm/mach-omap2/Makefile
> > @@ -27,7 +27,7 @@ ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
> > Â obj-y += mcbsp.o
> > Â endif
> > ÂÂ
> > -obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
> > +obj-$(CONFIG_TWL_CORE) += omap_twl.o
> > Â obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
> > ÂÂ
> > Â # SMP support ONLY available for OMAP4
> > diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> > index b668719..bf4dac2 100644
> > --- a/arch/arm/mach-omap2/pm.h
> > +++ b/arch/arm/mach-omap2/pm.h
> > @@ -123,7 +123,7 @@ static inline int omap_devinit_smartreflex(void)
> > Â static inline void omap_enable_smartreflex_on_init(void) {}
> > Â #endif
> > ÂÂ
> > -#ifdef CONFIG_TWL4030_CORE
> > +#ifdef CONFIG_TWL_CORE
> > Â extern int omap3_twl_init(void);
> > Â extern int omap4_twl_init(void);
> > Â extern int omap3_twl_set_sr_bit(bool enable);
> > diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> > index d055db3..8631a45 100644
> > --- a/arch/arm/plat-omap/Kconfig
> > +++ b/arch/arm/plat-omap/Kconfig
> > @@ -44,7 +44,7 @@ config POWER_AVS_OMAP
> > ÂÂ
> > Â config POWER_AVS_OMAP_CLASS3
> > ÂÂ bool "Class 3 mode of Smartreflex Implementation"
> > - depends on POWER_AVS_OMAP && TWL4030_CORE
> > + depends on POWER_AVS_OMAP && TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂSay Y to enable Class 3 implementation of Smartreflex
> > ÂÂ
> > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> > index 5f3429f..62ca9b4 100644
> > --- a/drivers/gpio/Kconfig
> > +++ b/drivers/gpio/Kconfig
> > @@ -933,7 +933,7 @@ config GPIO_TPS65912
> > ÂÂ
> > Â config GPIO_TWL4030
> > ÂÂ tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂSay yes here to access the GPIO signals of various multi-
> > function
> > ÂÂ ÂÂpower management chips from Texas Instruments.
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index af4aea7..3360492 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -440,7 +440,7 @@ config TI_AM335X_ADC
> > ÂÂ
> > Â config TWL4030_MADC
> > ÂÂ tristate "TWL4030 MADC (Monitoring A/D Converter)"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂThis driver provides support for Triton TWL4030-MADC. The
> > ÂÂ ÂÂdriver supports both RT and SW conversion methods.
> > @@ -450,7 +450,7 @@ config TWL4030_MADC
> > ÂÂ
> > Â config TWL6030_GPADC
> > ÂÂ tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ default n
> > ÂÂ help
> > ÂÂ ÂÂSay yes here if you want support for the TWL6030/TWL6032 General
> > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> > index 509608c..9cfa09b 100644
> > --- a/drivers/input/keyboard/Kconfig
> > +++ b/drivers/input/keyboard/Kconfig
> > @@ -653,7 +653,7 @@ config KEYBOARD_TC3589X
> > ÂÂ
> > Â config KEYBOARD_TWL4030
> > ÂÂ tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ select INPUT_MATRIXKMAP
> > ÂÂ help
> > ÂÂ ÂÂSay Y here if your board use the keypad controller on
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index 1f2337a..6abb6df 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -461,7 +461,7 @@ config INPUT_AXP20X_PEK
> > ÂÂ
> > Â config INPUT_TWL4030_PWRBUTTON
> > ÂÂ tristate "TWL4030 Power button Driver"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂSay Y here if you want to enable power key reporting via the
> > ÂÂ ÂÂTWL4030 family of chips.
> > @@ -471,7 +471,7 @@ config INPUT_TWL4030_PWRBUTTON
> > ÂÂ
> > Â config INPUT_TWL4030_VIBRA
> > ÂÂ tristate "Support for TWL4030 Vibrator"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ select MFD_TWL4030_AUDIO
> > ÂÂ select INPUT_FF_MEMLESS
> > ÂÂ help
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index eea61e3..28bfe3d 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1266,7 +1266,7 @@ config MFD_TPS80031
> > ÂÂ ÂÂADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
> > ÂÂ ÂÂPower Path from USB, 32K clock generator.
> > ÂÂ
> > -config TWL4030_CORE
> > +config TWL_CORE
> > ÂÂ bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
> > ÂÂ depends on I2C=y
> > ÂÂ select IRQ_DOMAIN
> > @@ -1284,7 +1284,7 @@ config TWL4030_CORE
> > ÂÂ
> > Â config TWL4030_POWER
> > ÂÂ bool "TI TWL4030 power resources"
> > - depends on TWL4030_CORE && ARM
> > + depends on TWL_CORE && ARM
> > ÂÂ help
> > ÂÂ ÂÂSay yes here if you want to use the power resources on the
> > ÂÂ ÂÂTWL4030 family chips.ÂÂMost of these resources are regulators,
> > @@ -1297,7 +1297,7 @@ config TWL4030_POWER
> > ÂÂ
> > Â config MFD_TWL4030_AUDIO
> > ÂÂ bool "TI TWL4030 Audio"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ select MFD_CORE
> > ÂÂ default n
> > ÂÂ
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 5eaa6465d..7daeab5 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -81,7 +81,7 @@ obj-$(CONFIG_MFD_TPS65912_SPI)ÂÂ+= tps65912-spi.o
> > Â obj-$(CONFIG_MFD_TPS80031) += tps80031.o
> > Â obj-$(CONFIG_MENELAUS) += menelaus.o
> > ÂÂ
> > -obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
> > +obj-$(CONFIG_TWL_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
> > Â obj-$(CONFIG_TWL4030_POWER)ÂÂÂÂ+= twl4030-power.o
> > Â obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
> > Â obj-$(CONFIG_TWL6040_CORE) += twl6040.o
> > diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
> > index 40e51b0..52dc294 100644
> > --- a/drivers/mfd/twl4030-irq.c
> > +++ b/drivers/mfd/twl4030-irq.c
> > @@ -54,7 +54,7 @@
> > ÂÂÂ* base + 8ÂÂ.. base + 15 SIH for PWR_INT
> > ÂÂÂ* base + 16 .. base + 33 SIH for GPIO
> > ÂÂÂ*/
> > -#define TWL4030_CORE_NR_IRQS 8
> > +#define TWL_CORE_NR_IRQS 8
> > Â #define TWL4030_PWR_NR_IRQS 8
> > ÂÂ
> > Â /* PIH register offsets */
> > @@ -693,7 +693,7 @@ int twl4030_init_irq(struct device *dev, int irq_num)
> > ÂÂ Â* the hwirqs numbers are defined contiguously from 1 to 15.
> > ÂÂ Â* Create only one domain for both.
> > ÂÂ Â*/
> > - nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
> > + nr_irqs = TWL4030_PWR_NR_IRQS + TWL_CORE_NR_IRQS;
> > ÂÂ
> > ÂÂ irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
> > ÂÂ if (IS_ERR_VALUE(irq_base)) {
> > @@ -704,7 +704,7 @@ int twl4030_init_irq(struct device *dev, int irq_num)
> > ÂÂ irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
> > ÂÂ ÂÂÂÂÂÂ&irq_domain_simple_ops, NULL);
> > ÂÂ
> > - irq_end = irq_base + TWL4030_CORE_NR_IRQS;
> > + irq_end = irq_base + TWL_CORE_NR_IRQS;
> > ÂÂ
> > ÂÂ /*
> > ÂÂ Â* Mask and clear all TWL4030 interrupts since initially we do
> > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> > index 26566db..6193565 100644
> > --- a/drivers/phy/Kconfig
> > +++ b/drivers/phy/Kconfig
> > @@ -164,7 +164,7 @@ config TI_PIPE3
> > ÂÂ
> > Â config TWL4030_USB
> > ÂÂ tristate "TWL4030 USB Transceiver Driver"
> > - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> > + depends on TWL_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> > ÂÂ depends on USB_SUPPORT
> > ÂÂ select GENERIC_PHY
> > ÂÂ select USB_PHY
> > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> > index 421770d..cc5fe9a 100644
> > --- a/drivers/power/Kconfig
> > +++ b/drivers/power/Kconfig
> > @@ -323,7 +323,7 @@ config CHARGER_MAX8903
> > ÂÂ
> > Â config CHARGER_TWL4030
> > ÂÂ tristate "OMAP TWL4030 BCI charger driver"
> > - depends on IIO && TWL4030_CORE
> > + depends on IIO && TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂSay Y here to enable support for TWL4030 Battery Charge
> > Interface.
> > ÂÂ
> > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> > index c182efc..6318f19 100644
> > --- a/drivers/pwm/Kconfig
> > +++ b/drivers/pwm/Kconfig
> > @@ -413,7 +413,7 @@ configÂÂPWM_TIPWMSS
> > ÂÂ
> > Â config PWM_TWL
> > ÂÂ tristate "TWL4030/6030 PWM support"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂGeneric PWM framework driver for TWL4030/6030.
> > ÂÂ
> > @@ -422,7 +422,7 @@ config PWM_TWL
> > ÂÂ
> > Â config PWM_TWL_LED
> > ÂÂ tristate "TWL4030/6030 PWM support for LED drivers"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂGeneric PWM framework driver for TWL4030/6030 LED terminals.
> > ÂÂ
> > diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> > index c77dc08..b62b4b4 100644
> > --- a/drivers/regulator/Kconfig
> > +++ b/drivers/regulator/Kconfig
> > @@ -803,7 +803,7 @@ config REGULATOR_TPS80031
> > ÂÂ
> > Â config REGULATOR_TWL4030
> > ÂÂ tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂThis driver supports the voltage regulators provided by
> > ÂÂ ÂÂthis family of companion chips.
> > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> > index 3e84315..198ac54 100644
> > --- a/drivers/rtc/Kconfig
> > +++ b/drivers/rtc/Kconfig
> > @@ -462,7 +462,7 @@ config RTC_DRV_TWL92330
> > ÂÂ
> > Â config RTC_DRV_TWL4030
> > ÂÂ tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂIf you say yes here you get support for the RTC on the
> > ÂÂ ÂÂTWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3
> > platforms.
> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> > index c690474..2911b11 100644
> > --- a/drivers/usb/phy/Kconfig
> > +++ b/drivers/usb/phy/Kconfig
> > @@ -80,7 +80,7 @@ config SAMSUNG_USBPHY
> > ÂÂ
> > Â config TWL6030_USB
> > ÂÂ tristate "TWL6030 USB Transceiver Driver"
> > - depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
> > + depends on TWL_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
> > ÂÂ help
> > ÂÂ ÂÂEnable this to support the USB OTG transceiver on TWL6030
> > ÂÂ ÂÂfamily chips. This TWL6030 transceiver has the VBUS and ID GND
> > diff --git a/drivers/video/backlight/Kconfig
> > b/drivers/video/backlight/Kconfig
> > index 5ffa4b4..8d6e4e0 100644
> > --- a/drivers/video/backlight/Kconfig
> > +++ b/drivers/video/backlight/Kconfig
> > @@ -412,7 +412,7 @@ config BACKLIGHT_OT200
> > ÂÂ
> > Â config BACKLIGHT_PANDORA
> > ÂÂ tristate "Backlight driver for Pandora console"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ help
> > ÂÂ ÂÂIf you have a Pandora console, say Y to enable the
> > ÂÂ ÂÂbacklight driver.
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > index fb94765..4b24418 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -462,7 +462,7 @@ config COH901327_WATCHDOG
> > ÂÂ
> > Â config TWL4030_WATCHDOG
> > ÂÂ tristate "TWL4030 Watchdog"
> > - depends on TWL4030_CORE
> > + depends on TWL_CORE
> > ÂÂ select WATCHDOG_CORE
> > ÂÂ help
> > ÂÂ ÂÂSupport for TI TWL4030 watchdog.ÂÂSay 'Y' here to enable the
> > diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> > index 4e7ea5f..2decb190 100644
> > --- a/include/linux/i2c/twl.h
> > +++ b/include/linux/i2c/twl.h
> > @@ -214,7 +214,7 @@ int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
> > Â int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
> > ÂÂ
> > Â /* Card detect Configuration for MMC1 Controller on OMAP4 */
> > -#ifdef CONFIG_TWL4030_CORE
> > +#ifdef CONFIG_TWL_CORE
> > Â int twl6030_mmc_card_detect_config(void);
> > Â #else
> > Â static inline int twl6030_mmc_card_detect_config(void)
> > @@ -225,7 +225,7 @@ static inline int twl6030_mmc_card_detect_config(void)
> > Â #endif
> > ÂÂ
> > Â /* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
> > -#ifdef CONFIG_TWL4030_CORE
> > +#ifdef CONFIG_TWL_CORE
> > Â int twl6030_mmc_card_detect(struct device *dev, int slot);
> > Â #else
> > Â static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
> > diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> > index 649e92a..009feb4 100644
> > --- a/sound/soc/codecs/Kconfig
> > +++ b/sound/soc/codecs/Kconfig
> > @@ -134,7 +134,7 @@ config SND_SOC_ALL_CODECS
> > ÂÂ select SND_SOC_TPA6130A2 if I2C
> > ÂÂ select SND_SOC_TLV320DAC33 if I2C
> > ÂÂ select SND_SOC_TS3A227E if I2C
> > - select SND_SOC_TWL4030 if TWL4030_CORE
> > + select SND_SOC_TWL4030 if TWL_CORE
> > ÂÂ select SND_SOC_TWL6040 if TWL6040_CORE
> > ÂÂ select SND_SOC_UDA134X
> > ÂÂ select SND_SOC_UDA1380 if I2C
> > diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
> > index 5185a38..49af002 100644
> > --- a/sound/soc/omap/Kconfig
> > +++ b/sound/soc/omap/Kconfig
> > @@ -85,7 +85,7 @@ config SND_OMAP_SOC_AM3517EVM
> > ÂÂ
> > Â config SND_OMAP_SOC_OMAP_TWL4030
> > ÂÂ tristate "SoC Audio support for TI SoC based boards with twl4030
> > codec"
> > - depends on TWL4030_CORE && SND_OMAP_SOC
> > + depends on TWL_CORE && SND_OMAP_SOC
> > ÂÂ select SND_OMAP_SOC_MCBSP
> > ÂÂ select SND_SOC_TWL4030
> > ÂÂ help
> > @@ -117,7 +117,7 @@ config SND_OMAP_SOC_OMAP_ABE_TWL6040
> > ÂÂ
> > Â config SND_OMAP_SOC_OMAP3_PANDORA
> > ÂÂ tristate "SoC Audio support for OMAP3 Pandora"
> > - depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
> > + depends on TWL_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
> > ÂÂ select SND_OMAP_SOC_MCBSP
> > ÂÂ select SND_SOC_TWL4030
> > ÂÂ help
> >
>

Attachment: signature.asc
Description: This is a digitally signed message part

Next message: Andy Lutomirski: "Re: [PATCH v5 3/9] x86/head: Move early exception panic code into early_fixup_exception"
Previous message: Paul Kocialkowski: "Re: [PATCH 2/2] ARM: OMAP4: Store reboot mode to SAR scratchpad memory before restart"
Next in thread: Grygorii Strashko: "Re: [PATCH 3/8] mfd: twl-core: Rename TWL4030_CORE Kconfig option to TWL_CORE"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]