[PATCH v13 6/9] added support for DesignWare Controller
From: Joao Pinto
Date: Mon Apr 04 2016 - 07:14:59 EST
This patch has the goal to add support for DesignWare UFS Controller
specific operations.
Signed-off-by: Joao Pinto <jpinto@xxxxxxxxxxxx>
---
Changes v12->v13:
- Nothing changed (just to keep up with patch set version).
Changes v11->v12 (Tomas Winkler):
- custom_phy_initialization is now phy_initialization
- ufshcd_is_intr_aggr_allowed() has now a DWC tweak
- link status was now moved to a separated patch
Changes v10->v11:
- Nothing changed (just to keep up with patch set version).
Changes v9->v10 (Arnd Bergmann):
- Patch now only has DWC controller specific code
- Added custom_phy_initialization callback for PHY specific code
Changes v8->v9 (Robert Herring):
- drop 0x in the node declaration
- most specific compatibility string declared first
Changes v7->v8 (Akinobu Mita):
- DME sets were simplified for easier reading
- CLK DIV default values definitions names were changed to match the
register's name
- New line added to dev_err and dev_info statements
Changes v6->v7 (Arnd Bergmann):
- Changed DT node name (to ufs only) and the memory address (to 0xd000000)
- Removed CONFIG_PM from the PCI glue driver (pm.h already does this)
- No other changes are necessary in ufshcd.c because of the link up notify
function usage (it is simpler now)
- Removed the PHY mentioning since the Test Chip is not a real PHY for real
world usage, since it is a test chip for prototyping with a very specific
usage
- Added again the Test Chip 20-bit option
Changes v5->v6:
- Patch bad format fixed
Changes v4->v5 (Akinobu Mita):
- All functions used only locally in ufshcd-dwc are now declared as static
- ufshcd_dwc_configuration() was removed in ufshcd-dwc and a notify
function (ufshcd_dwc_link_startup_notify) was created to deal with the
DWC specific init routines
- 20-bit RMMI option was removed from Kconfig. Now if MPHY TC is selected
and 40-bit is not then it assumes a 20-bit config
Changes v3->v4 (Arnd Bergmann and Mark Rutland):
- SCSI_UFS_DWC_HOOKS is now silent and selected by the SCSI_UFS_DWC_PLAT
or SCSI_UFS_DWC_PCI
- Compatibility string has the ufs core version for info purposes since
the driver is capable of getting the controller version from its
registers
- Created ufs-dwc-pci glue driver with specific DWC data
- MPHY configuration remains in the ufshcd-dwc since it is unipro
attribute writting only not following the a linux phy framework logic
Changes v2->v3 (Julian Calaby):
- Implement a common DWC code to be used by the platform and pci glue
drivers
- Synopsys ID & Class added to the existing pci driver and specific DWC
was also added to the pci driver
Changes v1->v2 (Akinobu Mita):
- Implement a platform driver that uses the existing UFS core driver
- Add DWC specific code to the existing UFS core driver
MAINTAINERS | 6 ++
drivers/scsi/ufs/Kconfig | 3 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufshcd-dwc.c | 150 ++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd-dwc.h | 26 ++++++++
drivers/scsi/ufs/ufshcd.h | 7 ++
drivers/scsi/ufs/ufshci-dwc.h | 36 ++++++++++
7 files changed, 229 insertions(+)
create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
create mode 100644 drivers/scsi/ufs/ufshci-dwc.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 32bafda..7fc2730 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11408,6 +11408,12 @@ S: Supported
F: Documentation/scsi/ufs.txt
F: drivers/scsi/ufs/
+UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
+M: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
+L: linux-scsi@xxxxxxxxxxxxxxx
+S: Supported
+F: drivers/scsi/ufs/*dwc*
+
UNSORTED BLOCK IMAGES (UBI)
M: Artem Bityutskiy <dedekind1@xxxxxxxxx>
M: Richard Weinberger <richard@xxxxxx>
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 5f45307..647c324 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -83,3 +83,6 @@ config SCSI_UFS_QCOM
Select this if you have UFS controller on QCOM chipset.
If unsure, say N.
+
+config SCSI_UFS_DWC
+ bool
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 8303bcc..ccbad53 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,4 +1,5 @@
# UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c
new file mode 100644
index 0000000..9b3ca7f
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.c
@@ -0,0 +1,150 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+ const struct ufshcd_dme_attr_val *v, int n)
+{
+ int ret = 0;
+ int attr_node = 0;
+
+ for (attr_node = 0; attr_node < n; attr_node++) {
+ ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
+ ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
+
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs);
+
+/**
+ * ufshcd_dwc_program_clk_div()
+ * This function programs the clk divider value. This value is needed to
+ * provide 1 microsecond tick to unipro layer.
+ * @hba: Private Structure pointer
+ * @divider_val: clock divider value to be programmed
+ *
+ */
+static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
+{
+ ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
+}
+
+/**
+ * ufshcd_dwc_link_is_up()
+ * Check if link is up
+ * @hba: private structure poitner
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
+{
+ int dme_result = 0;
+
+ ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
+
+ if (dme_result == UFSHCD_LINK_IS_UP) {
+ ufshcd_set_link_active(hba);
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
+ * ufshcd_dwc_connection_setup()
+ * This function configures both the local side (host) and the peer side
+ * (device) unipro attributes to establish the connection to application/
+ * cport.
+ * This function is not required if the hardware is properly configured to
+ * have this connection setup on reset. But invoking this function does no
+ * harm and should be fine even working with any ufs device.
+ *
+ * @hba: pointer to drivers private data
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
+{
+ const struct ufshcd_dme_attr_val setup_attrs[] = {
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
+ { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
+ { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
+ { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
+ { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
+ { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
+ { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
+ { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
+ { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
+ { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
+ };
+
+ return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * ufshcd_dwc_link_startup_notify()
+ * UFS Host DWC specific link startup sequence
+ * @hba: private structure poitner
+ * @status: Callback notify status
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+
+ if (status == PRE_CHANGE) {
+ ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
+
+ if (hba->vops->phy_initialization) {
+ err = hba->vops->phy_initialization(hba);
+ if (err) {
+ dev_err(hba->dev, "Phy setup failed (%d)\n",
+ err);
+ goto out;
+ }
+ }
+ } else { /* POST_CHANGE */
+ err = ufshcd_dwc_link_is_up(hba);
+ if (err) {
+ dev_err(hba->dev, "Link is not up\n");
+ goto out;
+ }
+
+ err = ufshcd_dwc_connection_setup(hba);
+ if (err)
+ dev_err(hba->dev, "Connection setup failed (%d)\n",
+ err);
+ }
+
+out:
+ return err;
+}
+EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify);
diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/scsi/ufs/ufshcd-dwc.h
new file mode 100644
index 0000000..c8be295
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.h
@@ -0,0 +1,26 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCD_DWC_H
+#define _UFSHCD_DWC_H
+
+struct ufshcd_dme_attr_val {
+ u32 attr_sel;
+ u32 mib_val;
+ u8 peer;
+};
+
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status);
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+ const struct ufshcd_dme_attr_val *v, int n);
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index e3931d0..c780d14 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -263,6 +263,7 @@ struct ufs_pwr_mode_info {
* @suspend: called during host controller PM callback
* @resume: called during host controller PM callback
* @dbg_register_dump: used to dump controller debug information
+ * @phy_initialization: used to initialize phys
*/
struct ufs_hba_variant_ops {
const char *name;
@@ -284,6 +285,7 @@ struct ufs_hba_variant_ops {
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
void (*dbg_register_dump)(struct ufs_hba *hba);
+ int (*phy_initialization)(struct ufs_hba *);
};
/* clock gating state */
@@ -555,11 +557,16 @@ static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
{
+/* DWC UFS Core has the Interrupt aggregation feature but is not detectable*/
+#ifndef CONFIG_SCSI_UFS_DWC
if ((hba->caps & UFSHCD_CAP_INTR_AGGR) &&
!(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR))
return true;
else
return false;
+#else
+return true;
+#endif
}
#define ufshcd_writel(hba, val, reg) \
diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/scsi/ufs/ufshci-dwc.h
new file mode 100644
index 0000000..ca341fe
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci-dwc.h
@@ -0,0 +1,36 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCI_DWC_H
+#define _UFSHCI_DWC_H
+
+/* DWC HC UFSHCI specific Registers */
+enum dwc_specific_registers {
+ DWC_UFS_REG_HCLKDIV = 0xFC,
+};
+
+/* Clock Divider Values: Hex equivalent of frequency in MHz */
+enum clk_div_values {
+ DWC_UFS_REG_HCLKDIV_DIV_62_5 = 0x3e,
+ DWC_UFS_REG_HCLKDIV_DIV_125 = 0x7d,
+ DWC_UFS_REG_HCLKDIV_DIV_200 = 0xc8,
+};
+
+/* Selector Index */
+enum selector_index {
+ SELIND_LN0_TX = 0x00,
+ SELIND_LN1_TX = 0x01,
+ SELIND_LN0_RX = 0x04,
+ SELIND_LN1_RX = 0x05,
+};
+
+#endif /* End of Header */
--
1.8.1.5