[PATCH v2 3/3] mmc: sdhci: removal of SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST

[Ludovic Desroches]

SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk is not used anymore so
remove it.

Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
---
 drivers/mmc/host/sdhci.c | 2 --
 drivers/mmc/host/sdhci.h | 5 -----
 2 files changed, 7 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 2c3dede..e2cfe6c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1191,8 +1191,6 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	host->mmc->actual_clock = 0;
 
 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
-	if (host->quirks2 & SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST)
-		mdelay(1);
 
 	if (clock == 0)
 		return;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 23ddd6e..4f60105 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -417,11 +417,6 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_ACMD23_BROKEN			(1<<14)
 /* Broken Clock divider zero in controller */
 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
-/*
- * When internal clock is disabled, a delay is needed before modifying the
- * SD clock frequency or enabling back the internal clock.
- */
-#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST	(1<<16)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
2.5.0