[PATCH] sbs-battery: fix power status when battery charging near dry

[YH Huang]

POWER_SUPPLY_STATUS_NOT_CHARGING is used for AC connected, but
battery not charging (e.g. because battery temperature is out
of acceptable range).

When battery is charging near dry and BATTERY_FULL_DISCHARGED is set,
it is wrong to set as POWER_SUPPLY_STATUS_NOT_CHARGING.
Just use BATTERY_DISCHARGING to decide the power supply status is
discharging or charging.

Signed-off-by: YH Huang <yh.huang@xxxxxxxxxxxx>
---
 drivers/power/sbs-battery.c |    4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index d6226d6..768b9fc 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -382,8 +382,6 @@ static int sbs_get_battery_property(struct i2c_client *client,
 
 		if (ret & BATTERY_FULL_CHARGED)
 			val->intval = POWER_SUPPLY_STATUS_FULL;
-		else if (ret & BATTERY_FULL_DISCHARGED)
-			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else if (ret & BATTERY_DISCHARGING)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 		else
@@ -702,8 +700,6 @@ static void sbs_delayed_work(struct work_struct *work)
 
 	if (ret & BATTERY_FULL_CHARGED)
 		ret = POWER_SUPPLY_STATUS_FULL;
-	else if (ret & BATTERY_FULL_DISCHARGED)
-		ret = POWER_SUPPLY_STATUS_NOT_CHARGING;
 	else if (ret & BATTERY_DISCHARGING)
 		ret = POWER_SUPPLY_STATUS_DISCHARGING;
 	else
-- 
1.7.9.5