On Wed, Apr 06, 2016 at 04:38:22PM +0800, Sugar Zhang wrote:here, i2s_sdio means i2s_sdi/i2s_sdo, not means SDIO bus interface.
There are 3 i2s sdio pins, which iomux mode is as follows:
s/i2s sdio/I2S\/SDIO muxed/
- sdi3_sdo1
- sdi2_sdo2
- sdi1_sdo3
we need to configure these pins' iomux mode via the GRF register
when use multi channel playback/capture.
Why not a pinctrl binding here? If you want SDIO mode, then you need
similar code in the SDIO driver (or just rely on default mode).
Signed-off-by: Sugar Zhang <sugar.zhang@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/sound/rockchip-i2s.txt | 5 +++
sound/soc/rockchip/rockchip_i2s.c | 39 +++++++++++++++++++++-
sound/soc/rockchip/rockchip_i2s.h | 8 +++++
3 files changed, 51 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 6e86d8a..ad72a7d 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -23,6 +23,11 @@ Required properties:
- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
+Required properties for controller which support multi channels playback/capture:
+
+- rockchip,grf: Should be phandle/offset pair. the phandle of the syscon node for GRF register,
Wrap your lines at less than 80 chars.
+ and the offset of the GRF for control register.
+
Example for rk3288 I2S controller:
i2s@ff890000 {
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip