[PATCH 2/2] bmips: add device tree example for BCM6358
From: Ãlvaro FernÃndez Rojas
Date: Sat Apr 09 2016 - 06:57:06 EST
This adds a device tree example for SFR Neufbox4 (Sercomm version), which
also serves as a real example for brcm,bcm6358-leds.
Signed-off-by: Ãlvaro FernÃndez Rojas <noltari@xxxxxxxxx>
---
v5: more device tree improvements
- There is just ohci/ehci node.
- Avoid using underscores in node names.
- Use interrupt-controller for cpu_intc.
- Rename uart aliases to serial.
v4: Device tree improvements:
- Switch to native-endian for syscon.
- Switch to bcm6345-l1-intc interrupt controller.
- Add ehci and ohci nodes.
v3: Device tree fixes
- Use interrupt-controller instead of periph_intc.
- Use led@# instead of naming the LEDs.
v2: Remove led0 alias and use stdout-path only
.../devicetree/bindings/mips/brcm/soc.txt | 2 +-
arch/mips/bmips/Kconfig | 4 +
arch/mips/boot/dts/brcm/Makefile | 2 +
arch/mips/boot/dts/brcm/bcm6358.dtsi | 130 +++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm96358nb4ser.dts | 46 ++++++++
5 files changed, 183 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/boot/dts/brcm/bcm6358.dtsi
create mode 100644 arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index 7bab90c..e58a4f6 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -4,7 +4,7 @@ Required properties:
- compatible: "brcm,bcm3384", "brcm,bcm33843"
"brcm,bcm3384-viper", "brcm,bcm33843-viper"
- "brcm,bcm6328", "brcm,bcm6368",
+ "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
"brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
"brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
index e2c4fd6..264328d 100644
--- a/arch/mips/bmips/Kconfig
+++ b/arch/mips/bmips/Kconfig
@@ -21,6 +21,10 @@ config DT_BCM93384WVG_VIPER
bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
select BUILTIN_DTB
+config DT_BCM96358NB4SER
+ bool "BCM96358NB4SER"
+ select BUILTIN_DTB
+
config DT_BCM96368MVWG
bool "BCM96368MVWG"
select BUILTIN_DTB
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index eabeb60..fda9d38 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb
dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb
+dtb-$(CONFIG_DT_BCM96358NB4SER) += bcm96358nb4ser.dtb
dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb
dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb
dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb
@@ -14,6 +15,7 @@ dtb-$(CONFIG_DT_BCM97435SVMB) += bcm97435svmb.dtb
dtb-$(CONFIG_DT_NONE) += \
bcm93384wvg.dtb \
bcm93384wvg_viper.dtb \
+ bcm96358nb4ser.dtb \
bcm96368mvwg.dtb \
bcm9ejtagprb.dtb \
bcm97125cbmb.dtb \
diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
new file mode 100644
index 0000000..f9d8d39
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -0,0 +1,130 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6358";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <150000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ periph_cntl: syscon@fffe0000 {
+ compatible = "syscon";
+ reg = <0xfffe0000 0xc>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@fffe0008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x8>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@fffe000c {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0xfffe000c 0x8>,
+ <0xfffe0038 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ leds0: led-controller@fffe00d0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6358-leds";
+ reg = <0xfffe00d0 0x8>;
+
+ status = "disabled";
+ };
+
+ uart0: serial@fffe0100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfffe0100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@fffe0120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfffe0120 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+
+ clocks = <&periph_clk>;
+
+ status = "disabled";
+ };
+
+ ehci: usb@fffe1300 {
+ compatible = "brcm,bcm6358-ehci", "generic-ehci";
+ reg = <0xfffe1300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ ohci: usb@fffe1400 {
+ compatible = "brcm,bcm6358-ohci", "generic-ohci";
+ reg = <0xfffe1400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
new file mode 100644
index 0000000..f412117
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+ compatible = "sfr,nb4-ser", "brcm,bcm6358";
+ model = "SFR Neufbox 4 (Sercomm)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
+&leds0 {
+ status = "ok";
+
+ led@0 {
+ reg = <0>;
+ active-low;
+ label = "nb4-ser:white:alarm";
+ };
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "nb4-ser:white:tv";
+ };
+ led@3 {
+ reg = <3>;
+ active-low;
+ label = "nb4-ser:white:tel";
+ };
+ led@4 {
+ reg = <4>;
+ active-low;
+ label = "nb4-ser:white:adsl";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.1.4