Re: [PATCH v2] iio: potentiometer: add driver for Maxim Integrated DS1803

[Slawomir Stepien]

On Apr 08, 2016 23:27, Slawomir Stepien wrote:
> +static int ds1803_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int *val, int *val2, long mask)
> +{
> +	struct ds1803_data *data = iio_priv(indio_dev);
> +	int pot = chan->channel;
> +	int ret;
> +	u16 result;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = i2c_master_recv(data->client, (char *)&result,
> +				indio_dev->num_channels);
> +		if (ret < 0)
> +			return ret;
> +
> +		/* Get bits for given pot */
> +		*val = (pot == 0 ? result & 0xff : result >> 8);
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 1000 * data->cfg->kohms;
> +		*val2 = DS1803_MAX_POS;
> +		return IIO_VAL_FRACTIONAL;
> +	}
> +
> +	return -EINVAL;
> +}

Or maybe this is more clean?

static int ds1803_read_raw(struct iio_dev *indio_dev,
			    struct iio_chan_spec const *chan,
			    int *val, int *val2, long mask)
{
	struct ds1803_data *data = iio_priv(indio_dev);
	int pot = chan->channel;
	int ret;
	unsigned char result[indio_dev->num_channels];

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		ret = i2c_master_recv(data->client, result,
				indio_dev->num_channels);
		if (ret < 0)
			return ret;

		*val = result[pot];
		return IIO_VAL_INT;

	case IIO_CHAN_INFO_SCALE:
		*val = 1000 * data->cfg->kohms;
		*val2 = DS1803_MAX_POS;
		return IIO_VAL_FRACTIONAL;
	}

	return -EINVAL;
}

What do you think?

-- 
Slawomir Stepien