Re: [PATCH] proc: meminfo: Replace kB with KiB in output
From: Michal Hocko
Date: Mon Apr 11 2016 - 02:12:25 EST
On Sun 10-04-16 17:23:11, Alexandru Juncu wrote:
> Current values are based on multiples of 1024 (powers of 2)
> which means that the values in meminfo are not kilobytes
> (1000 bytes) but kibibytes (1024 bytes). The correct
> prefix for that would be 'Ki' so the output should be 'KiB'.
Does the difference actually matters so much that we should change a
user visible format of a file? Some users might not ready to changes
(say sombody did sed 's@.*:[[:space:]]*\([0-9]*\) kB@\1@' to get values.
This change would break it which is something we try to prevent as much
as possible.
So I do not think this all is worth the potential troubles. There are
probably other places where we present kB while we in fact think kiB.
> Signed-off-by: Alexandru Juncu <alexj@xxxxxxxxx>
> ---
> fs/proc/meminfo.c | 90 +++++++++++++++++++++++++++----------------------------
> 1 file changed, 45 insertions(+), 45 deletions(-)
>
> diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
> index 8372046..5f0015e 100644
> --- a/fs/proc/meminfo.c
> +++ b/fs/proc/meminfo.c
> @@ -33,7 +33,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
> int lru;
>
> /*
> - * display in kilobytes.
> + * display in kibibytes.
> */
> #define K(x) ((x) << (PAGE_SHIFT - 10))
> si_meminfo(&i);
> @@ -54,61 +54,61 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
> * Tagged format, for easy grepping and expansion.
> */
> seq_printf(m,
> - "MemTotal: %8lu kB\n"
> - "MemFree: %8lu kB\n"
> - "MemAvailable: %8lu kB\n"
> - "Buffers: %8lu kB\n"
> - "Cached: %8lu kB\n"
> - "SwapCached: %8lu kB\n"
> - "Active: %8lu kB\n"
> - "Inactive: %8lu kB\n"
> - "Active(anon): %8lu kB\n"
> - "Inactive(anon): %8lu kB\n"
> - "Active(file): %8lu kB\n"
> - "Inactive(file): %8lu kB\n"
> - "Unevictable: %8lu kB\n"
> - "Mlocked: %8lu kB\n"
> + "MemTotal: %8lu KiB\n"
> + "MemFree: %8lu KiB\n"
> + "MemAvailable: %8lu KiB\n"
> + "Buffers: %8lu KiB\n"
> + "Cached: %8lu KiB\n"
> + "SwapCached: %8lu KiB\n"
> + "Active: %8lu KiB\n"
> + "Inactive: %8lu KiB\n"
> + "Active(anon): %8lu KiB\n"
> + "Inactive(anon): %8lu KiB\n"
> + "Active(file): %8lu KiB\n"
> + "Inactive(file): %8lu KiB\n"
> + "Unevictable: %8lu KiB\n"
> + "Mlocked: %8lu KiB\n"
> #ifdef CONFIG_HIGHMEM
> - "HighTotal: %8lu kB\n"
> - "HighFree: %8lu kB\n"
> - "LowTotal: %8lu kB\n"
> - "LowFree: %8lu kB\n"
> + "HighTotal: %8lu KiB\n"
> + "HighFree: %8lu KiB\n"
> + "LowTotal: %8lu KiB\n"
> + "LowFree: %8lu KiB\n"
> #endif
> #ifndef CONFIG_MMU
> - "MmapCopy: %8lu kB\n"
> + "MmapCopy: %8lu KiB\n"
> #endif
> - "SwapTotal: %8lu kB\n"
> - "SwapFree: %8lu kB\n"
> - "Dirty: %8lu kB\n"
> - "Writeback: %8lu kB\n"
> - "AnonPages: %8lu kB\n"
> - "Mapped: %8lu kB\n"
> - "Shmem: %8lu kB\n"
> - "Slab: %8lu kB\n"
> - "SReclaimable: %8lu kB\n"
> - "SUnreclaim: %8lu kB\n"
> - "KernelStack: %8lu kB\n"
> - "PageTables: %8lu kB\n"
> + "SwapTotal: %8lu KiB\n"
> + "SwapFree: %8lu KiB\n"
> + "Dirty: %8lu KiB\n"
> + "Writeback: %8lu KiB\n"
> + "AnonPages: %8lu KiB\n"
> + "Mapped: %8lu KiB\n"
> + "Shmem: %8lu KiB\n"
> + "Slab: %8lu KiB\n"
> + "SReclaimable: %8lu KiB\n"
> + "SUnreclaim: %8lu KiB\n"
> + "KernelStack: %8lu KiB\n"
> + "PageTables: %8lu KiB\n"
> #ifdef CONFIG_QUICKLIST
> - "Quicklists: %8lu kB\n"
> + "Quicklists: %8lu KiB\n"
> #endif
> - "NFS_Unstable: %8lu kB\n"
> - "Bounce: %8lu kB\n"
> - "WritebackTmp: %8lu kB\n"
> - "CommitLimit: %8lu kB\n"
> - "Committed_AS: %8lu kB\n"
> - "VmallocTotal: %8lu kB\n"
> - "VmallocUsed: %8lu kB\n"
> - "VmallocChunk: %8lu kB\n"
> + "NFS_Unstable: %8lu KiB\n"
> + "Bounce: %8lu KiB\n"
> + "WritebackTmp: %8lu KiB\n"
> + "CommitLimit: %8lu KiB\n"
> + "Committed_AS: %8lu KiB\n"
> + "VmallocTotal: %8lu KiB\n"
> + "VmallocUsed: %8lu KiB\n"
> + "VmallocChunk: %8lu KiB\n"
> #ifdef CONFIG_MEMORY_FAILURE
> - "HardwareCorrupted: %5lu kB\n"
> + "HardwareCorrupted: %5lu KiB\n"
> #endif
> #ifdef CONFIG_TRANSPARENT_HUGEPAGE
> - "AnonHugePages: %8lu kB\n"
> + "AnonHugePages: %8lu KiB\n"
> #endif
> #ifdef CONFIG_CMA
> - "CmaTotal: %8lu kB\n"
> - "CmaFree: %8lu kB\n"
> + "CmaTotal: %8lu KiB\n"
> + "CmaFree: %8lu KiB\n"
> #endif
> ,
> K(i.totalram),
> --
> 2.5.5
>
--
Michal Hocko
SUSE Labs