Re: [PATCH v8 1/5] mfd: hi655x: Add document for mfd hi665x PMIC
From: Lee Jones
Date: Mon Apr 11 2016 - 06:40:58 EST
On Sun, 14 Feb 2016, Chen Feng wrote:
> DT bindings for hisilicon hi655x MFD PMIC chip.
>
> Signed-off-by: Chen Feng <puck.chen@xxxxxxxxxxxxx>
> Signed-off-by: Fei Wang <w.f@xxxxxxxxxx>
> Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
> Reviewed-by: Haojian Zhuang <haojian.zhuang@xxxxxxxxxx>
> ---
> .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
Applied, thanks.
> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
> new file mode 100644
> index 0000000..0548569
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
> @@ -0,0 +1,27 @@
> +Hisilicon Hi655x Power Management Integrated Circuit (PMIC)
> +
> +The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
> +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
> +We can use memory-mapped I/O to communicate.
> +
> ++----------------+ +-------------+
> +| | | |
> +| Hi6220 | SSI bus | Hi655x |
> +| |-------------| |
> +| |(REGMAP_MMIO)| |
> ++----------------+ +-------------+
> +
> +Required properties:
> +- compatible: Should be "hisilicon,hi655x-pmic".
> +- reg: Base address of PMIC on Hi6220 SoC.
> +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
> +- pmic-gpios: The GPIO used by PMIC IRQ.
> +
> +Example:
> + pmic: pmic@f8000000 {
> + compatible = "hisilicon,hi655x-pmic";
> + reg = <0x0 0xf8000000 0x0 0x1000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + }
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog