[PATCH v2 0/5] Support for max44000 Ambient and Infrared Proximity Sensor

[Crestez Dan Leonard]

Changes since v1:
* Remove max44000_data.client
* Maintain alphabetical order in kconfig/makefile
* Avoid pointless inlines
* Remove explicit CONFIG_OF because no special handling is done
* Set storagebits = 16 for proximity channel and avoid VLAs
* Expand MAX44000_REGMASK for readability/reviewability
* Clear irq bits at the end of the probe function
* Only write important bits on probe rather than everything

I'm not sure about only partially resetting the device on probe.

Crestez Dan Leonard (5):
  max44000: Initial support
  max44000: Initial support for proximity reading
  max44000: Support controlling LED current output
  max44000: Expose ambient sensor scaling
  max44000: Initial triggered buffer support

 drivers/iio/light/Kconfig    |  11 +
 drivers/iio/light/Makefile   |   1 +
 drivers/iio/light/max44000.c | 649 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 661 insertions(+)
 create mode 100644 drivers/iio/light/max44000.c

-- 
2.5.5