[PATCH 4/7] soc/tegra: pmc: Add interface to set voltage of IO rails
From: Laxman Dewangan
Date: Tue Apr 12 2016 - 11:17:35 EST
NVIDIA Tegra210 supports some of the IO interface which can operate
at 1.8V or 3.3V I/O rail voltage levels. SW needs to configure
Tegra PMC register to set different voltage level of IO interface based
on IO rail voltage from power supply i.e. power regulators.
Add APIs to set and get IO rail voltage from the client driver.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
drivers/soc/tegra/pmc.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++
include/soc/tegra/pmc.h | 32 +++++++++++++++++
2 files changed, 127 insertions(+)
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 0bc8219..968f7cb 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -73,6 +73,10 @@
#define PMC_SCRATCH41 0x140
+/* Power detect for IO rail voltage */
+#define PMC_PWR_DET 0x48
+#define PMC_PWR_DET_VAL 0xe4
+
#define PMC_SENSOR_CTRL 0x1b0
#define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2)
#define PMC_SENSOR_CTRL_ENABLE_RST BIT(1)
@@ -102,6 +106,8 @@
#define GPU_RG_CNTRL 0x2d4
+static DEFINE_SPINLOCK(tegra_pmc_access_lock);
+
struct tegra_pmc_soc {
unsigned int num_powergates;
const char *const *powergates;
@@ -110,6 +116,7 @@ struct tegra_pmc_soc {
bool has_tsense_reset;
bool has_gpu_clamps;
+ bool has_io_rail_voltage_config;
};
/**
@@ -160,11 +167,31 @@ struct tegra_pmc {
struct mutex powergates_lock;
};
+struct tegra_io_rail_voltage_bit_info {
+ int io_rail_id;
+ int bit_position;
+};
+
static struct tegra_pmc *pmc = &(struct tegra_pmc) {
.base = NULL,
.suspend_mode = TEGRA_SUSPEND_NONE,
};
+#define TEGRA_IO_RAIL_VOLTAGE(_io_rail, _pos) \
+{ \
+ .io_rail_id = TEGRA_IO_RAIL_##_io_rail, \
+ .bit_position = _pos, \
+}
+
+static struct tegra_io_rail_voltage_bit_info tegra210_io_rail_voltage_info[] = {
+ TEGRA_IO_RAIL_VOLTAGE(SDMMC1, 12),
+ TEGRA_IO_RAIL_VOLTAGE(SDMMC3, 13),
+ TEGRA_IO_RAIL_VOLTAGE(AUDIO_HV, 18),
+ TEGRA_IO_RAIL_VOLTAGE(DMIC, 20),
+ TEGRA_IO_RAIL_VOLTAGE(GPIO, 21),
+ TEGRA_IO_RAIL_VOLTAGE(SPI_HV, 23),
+};
+
static u32 tegra_pmc_readl(unsigned long offset)
{
return readl(pmc->base + offset);
@@ -175,6 +202,16 @@ static void tegra_pmc_writel(u32 value, unsigned long offset)
writel(value, pmc->base + offset);
}
+static void _tegra_pmc_register_update(unsigned long addr, unsigned long mask,
+ unsigned long val)
+{
+ u32 pmc_reg;
+
+ pmc_reg = tegra_pmc_readl(addr);
+ pmc_reg = (pmc_reg & ~mask) | (val & mask);
+ tegra_pmc_writel(pmc_reg, addr);
+}
+
static inline bool tegra_powergate_state(int id)
{
if (id == TEGRA_POWERGATE_3D && pmc->soc->has_gpu_clamps)
@@ -410,6 +447,63 @@ int tegra_pmc_cpu_remove_clamping(unsigned int cpuid)
}
#endif /* CONFIG_SMP */
+static int tegra_io_rail_voltage_get_bit_pos(int io_rail_id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tegra210_io_rail_voltage_info); ++i) {
+ if (tegra210_io_rail_voltage_info[i].io_rail_id == io_rail_id)
+ return tegra210_io_rail_voltage_info[i].bit_position;
+ }
+
+ return -EINVAL;
+}
+
+int tegra_io_rail_voltage_set(int io_rail, int val)
+{
+ unsigned long flags;
+ unsigned long bval, mask;
+ int bpos;
+
+ if (!pmc->soc->has_io_rail_voltage_config)
+ return -ENODEV;
+
+ bpos = tegra_io_rail_voltage_get_bit_pos(io_rail);
+ if (bpos < 0)
+ return bpos;
+
+ mask = BIT(bpos);
+ bval = (val) ? mask : 0;
+
+ spin_lock_irqsave(&tegra_pmc_access_lock, flags);
+ _tegra_pmc_register_update(PMC_PWR_DET, mask, mask);
+ _tegra_pmc_register_update(PMC_PWR_DET_VAL, mask, bval);
+ spin_unlock_irqrestore(&tegra_pmc_access_lock, flags);
+
+ usleep_range(5, 10);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_io_rail_voltage_set);
+
+int tegra_io_rail_voltage_get(int io_rail)
+{
+ u32 rval;
+ int bpos;
+
+ if (!pmc->soc->has_io_rail_voltage_config)
+ return -ENODEV;
+
+ bpos = tegra_io_rail_voltage_get_bit_pos(io_rail);
+ if (bpos < 0)
+ return bpos;
+
+ rval = tegra_pmc_readl(PMC_PWR_DET_VAL);
+
+ return !!(rval & BIT(bpos));
+}
+EXPORT_SYMBOL(tegra_io_rail_voltage_get);
+
static int tegra_pmc_restart_notify(struct notifier_block *this,
unsigned long action, void *data)
{
@@ -1102,6 +1196,7 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
.cpu_powergates = tegra210_cpu_powergates,
.has_tsense_reset = true,
.has_gpu_clamps = true,
+ .has_io_rail_voltage_config = true,
};
static const struct of_device_id tegra_pmc_match[] = {
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index 4f3db41..98ebf35 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -134,6 +134,27 @@ int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk,
int tegra_io_rail_power_on(unsigned int id);
int tegra_io_rail_power_off(unsigned int id);
int tegra_io_rail_power_get_status(unsigned int id);
+
+/*
+ * tegra_io_rail_voltage_set: Set IO rail voltage.
+ * @io_rail: Tegra IO rail ID as defined in macro TEGRA_IO_RAIL_*
+ * @val: Voltage need to be set. The values are:
+ * 0 for 1.8V,
+ * 1 for 3.3V.
+ *
+ * Returns 0 if success otherwise error number.
+ */
+int tegra_io_rail_voltage_set(int io_rail, int val);
+
+/*
+ * tegra_io_rail_voltage_get: Get IO rail voltage.
+ * @io_rail: Tegra IO rail ID as defined in macro TEGRA_IO_RAIL_*
+ *
+ * Returns negative error number if it fails due to invalid io pad id.
+ * Otherwise 0 for 1.8V, 1 for 3.3V.
+ */
+int tegra_io_rail_voltage_get(int io_rail);
+
#else
static inline int tegra_powergate_is_powered(unsigned int id)
{
@@ -176,6 +197,17 @@ static inline int tegra_io_rail_power_get_status(unsigned int id)
{
return -ENOTSUP;
}
+
+static inline int tegra_io_rail_voltage_set(int io_rail, int val)
+{
+ return -ENOTSUP;
+}
+
+static inline int tegra_io_rail_voltage_get(int io_rail)
+{
+ return -ENOTSUP;
+}
+
#endif /* CONFIG_ARCH_TEGRA */
#endif /* __SOC_TEGRA_PMC_H__ */
--
2.1.4