Re: [PATCH v6 04/50] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate

[Nicolas Ferre]

Le 13/04/2016 17:53, Boris Brezillon a écrit :
> The mtd_ooblayout_xxx() helper functions have been added to avoid direct
> accesses to the ecclayout field, and thus ease for future reworks.
> Use these helpers in all places where the oobfree[] and eccpos[] arrays
> where directly accessed.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>

Thanks for the quick rework Boris!

Reviewed-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>

> ---
>  drivers/mtd/nand/atmel_nand.c | 50 +++++++++++++++++++++++++++----------------
>  1 file changed, 31 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index 5e716f2..b132c8f 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -833,13 +833,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
>  			dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
>  				pos, bit_pos, err_byte, *(buf + byte_pos));
>  		} else {
> +			struct mtd_oob_region oobregion;
> +
>  			/* Bit flip in OOB area */
>  			tmp = sector_num * nand_chip->ecc.bytes
>  					+ (byte_pos - sector_size);
>  			err_byte = ecc[tmp];
>  			ecc[tmp] ^= (1 << bit_pos);
>  
> -			pos = tmp + nand_chip->ecc.layout->eccpos[0];
> +			mtd_ooblayout_ecc(mtd, 0, &oobregion);
> +			pos = tmp + oobregion.offset;
>  			dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
>  				pos, bit_pos, err_byte, ecc[tmp]);
>  		}
> @@ -931,7 +934,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
>  	struct atmel_nand_host *host = nand_get_controller_data(chip);
>  	int eccsize = chip->ecc.size * chip->ecc.steps;
>  	uint8_t *oob = chip->oob_poi;
> -	uint32_t *eccpos = chip->ecc.layout->eccpos;
>  	uint32_t stat;
>  	unsigned long end_time;
>  	int bitflips = 0;
> @@ -953,7 +955,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
>  
>  	stat = pmecc_readl_relaxed(host->ecc, ISR);
>  	if (stat != 0) {
> -		bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
> +		struct mtd_oob_region oobregion;
> +
> +		mtd_ooblayout_ecc(mtd, 0, &oobregion);
> +		bitflips = pmecc_correction(mtd, stat, buf,
> +					    &oob[oobregion.offset]);
>  		if (bitflips < 0)
>  			/* uncorrectable errors */
>  			return 0;
> @@ -967,8 +973,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
>  		int page)
>  {
>  	struct atmel_nand_host *host = nand_get_controller_data(chip);
> -	uint32_t *eccpos = chip->ecc.layout->eccpos;
> -	int i, j;
> +	struct mtd_oob_region oobregion = { };
> +	int i, j, section = 0;
>  	unsigned long end_time;
>  
>  	if (!host->nfc || !host->nfc->write_by_sram) {
> @@ -987,11 +993,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
>  
>  	for (i = 0; i < chip->ecc.steps; i++) {
>  		for (j = 0; j < chip->ecc.bytes; j++) {
> -			int pos;
> +			if (!oobregion.length)
> +				mtd_ooblayout_ecc(mtd, section, &oobregion);
>  
> -			pos = i * chip->ecc.bytes + j;
> -			chip->oob_poi[eccpos[pos]] =
> +			chip->oob_poi[oobregion.offset] =
>  				pmecc_readb_ecc_relaxed(host->ecc, i, j);
> +			oobregion.length--;
> +			oobregion.offset++;
> +			section++;
>  		}
>  	}
>  	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
> @@ -1005,6 +1014,7 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
>  	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
>  	uint32_t val = 0;
>  	struct nand_ecclayout *ecc_layout;
> +	struct mtd_oob_region oobregion;
>  
>  	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
>  	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
> @@ -1056,9 +1066,10 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
>  
>  	ecc_layout = nand_chip->ecc.layout;
>  	pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
> -	pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
> +	mtd_ooblayout_ecc(mtd, 0, &oobregion);
> +	pmecc_writel(host->ecc, SADDR, oobregion.offset);
>  	pmecc_writel(host->ecc, EADDR,
> -			ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
> +		     oobregion.offset + ecc_layout->eccbytes - 1);
>  	/* See datasheet about PMECC Clock Control Register */
>  	pmecc_writel(host->ecc, CLK, 2);
>  	pmecc_writel(host->ecc, IDR, 0xff);
> @@ -1359,12 +1370,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  {
>  	int eccsize = chip->ecc.size;
>  	int eccbytes = chip->ecc.bytes;
> -	uint32_t *eccpos = chip->ecc.layout->eccpos;
>  	uint8_t *p = buf;
>  	uint8_t *oob = chip->oob_poi;
>  	uint8_t *ecc_pos;
>  	int stat;
>  	unsigned int max_bitflips = 0;
> +	struct mtd_oob_region oobregion = {};
>  
>  	/*
>  	 * Errata: ALE is incorrectly wired up to the ECC controller
> @@ -1382,19 +1393,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  	chip->read_buf(mtd, p, eccsize);
>  
>  	/* move to ECC position if needed */
> -	if (eccpos[0] != 0) {
> -		/* This only works on large pages
> -		 * because the ECC controller waits for
> -		 * NAND_CMD_RNDOUTSTART after the
> -		 * NAND_CMD_RNDOUT.
> -		 * anyway, for small pages, the eccpos[0] == 0
> +	mtd_ooblayout_ecc(mtd, 0, &oobregion);
> +	if (oobregion.offset != 0) {
> +		/*
> +		 * This only works on large pages because the ECC controller
> +		 * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
> +		 * Anyway, for small pages, the first ECC byte is at offset
> +		 * 0 in the OOB area.
>  		 */
>  		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
> -				mtd->writesize + eccpos[0], -1);
> +			      mtd->writesize + oobregion.offset, -1);
>  	}
>  
>  	/* the ECC controller needs to read the ECC just after the data */
> -	ecc_pos = oob + eccpos[0];
> +	ecc_pos = oob + oobregion.offset;
>  	chip->read_buf(mtd, ecc_pos, eccbytes);
>  
>  	/* check if there's an error */
> 


-- 
Nicolas Ferre