[PATCH v5 15/24] drm: i915: explicitly apply PWM config extracted from pwm_args

[Boris Brezillon]

Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information provided
in pwm_args.

This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_panel.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 21ee647..dc3a2e4 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1640,6 +1640,12 @@ static int pwm_setup_backlight(struct intel_connector *connector,
 		return -ENODEV;
 	}
 
+	/*
+	 * FIXME: pwm_apply_args() should be removed when switching to
+	 * the atomic PWM API.
+	 */
+	pwm_apply_args(panel->backlight.pwm);
+
 	retval = pwm_config(panel->backlight.pwm, CRC_PMIC_PWM_PERIOD_NS,
 			    CRC_PMIC_PWM_PERIOD_NS);
 	if (retval < 0) {
-- 
2.5.0