Re: [PATCH 6/7] pinctrl: tegra: Add DT binding for io pads control

[Laxman Dewangan]

On Friday 15 April 2016 08:44 PM, Jon Hunter wrote:
> On 15/04/16 15:12, Laxman Dewangan wrote:
> > All CSI pads are lined to single IO rail.
> I agree with this and from the data-sheet I see the rail that powers the
> CSI (and DSI) interfaces is called AVDD_DSI_CSI. But again, in the DT
> document you are referring to csia, csib, csic, csid, csie, csif as
> pins, but these don't appear to be physical pins, and this appears to be
> more of a software means to control power to the various csi_x pins.
>
> It seems to me that each of the existing CSI_A_xxx pins/pads should be
> mapped to or register with the appropriate power-down control and when
> all pads are set to inactive this then triggers the power-down of all
> the CSI_A_xxx pads.

I used pins as this is the property from pincon generic so that I can 
use the generic implementation.

Here, I will not go to the pin level control as HW does not support pin 
level control.

I will say the unit should be interface level. Should we say 
IO_GROUP_CSIA, IO_GROUP_CSIB etc?


>