Re: [PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device

From: Jonathan Cameron
Date: Sat Apr 16 2016 - 15:24:25 EST

Next message: Jonathan Cameron: "Re: [PATCH 1/2] iio: adc: Indent if statement"
Previous message: Arnd Bergmann: "Re: [Question] reset controlling"
Next in thread: Srinivas Pandruvada: "Re: [PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 10/04/16 20:08, Alison Schofield wrote:
> Driver includes struct regmap and struct device in its global data.
> Remove the struct device and use regmap API to retrieve device info.
>
> Patch created using Coccinelle plus manual edits.
>
> Signed-off-by: Alison Schofield <amsfield22@xxxxxxxxx>
Cc'd Srinivas

Actually I'm curious as to why linux-arm-kernel and linux-samsung-soc are cc'd?
Not terribly relevant lists...
> ---
> drivers/iio/gyro/bmg160_core.c | 86 +++++++++++++++++++++---------------------
> 1 file changed, 44 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
> index 2493bb1..b2b1071 100644
> --- a/drivers/iio/gyro/bmg160_core.c
> +++ b/drivers/iio/gyro/bmg160_core.c
> @@ -95,7 +95,6 @@
> #define BMG160_AUTO_SUSPEND_DELAY_MS 2000
>
> struct bmg160_data {
> - struct device *dev;
> struct regmap *regmap;
> struct iio_trigger *dready_trig;
> struct iio_trigger *motion_trig;
> @@ -137,11 +136,12 @@ static const struct {
>
> static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
>
> ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
> if (ret < 0) {
> - dev_err(data->dev, "Error writing reg_pmu_lpw\n");
> + dev_err(dev, "Error writing reg_pmu_lpw\n");
> return ret;
> }
>
> @@ -162,6 +162,7 @@ static int bmg160_convert_freq_to_bit(int val)
>
> static int bmg160_set_bw(struct bmg160_data *data, int val)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
> int bw_bits;
>
> @@ -171,7 +172,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
>
> ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
> if (ret < 0) {
> - dev_err(data->dev, "Error writing reg_pmu_bw\n");
> + dev_err(dev, "Error writing reg_pmu_bw\n");
> return ret;
> }
>
> @@ -182,18 +183,19 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
>
> static int bmg160_chip_init(struct bmg160_data *data)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
> unsigned int val;
>
> ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
> if (ret < 0) {
> - dev_err(data->dev, "Error reading reg_chip_id\n");
> + dev_err(dev, "Error reading reg_chip_id\n");
> return ret;
> }
>
> - dev_dbg(data->dev, "Chip Id %x\n", val);
> + dev_dbg(dev, "Chip Id %x\n", val);
> if (val != BMG160_CHIP_ID_VAL) {
> - dev_err(data->dev, "invalid chip %x\n", val);
> + dev_err(dev, "invalid chip %x\n", val);
> return -ENODEV;
> }
>
> @@ -212,14 +214,14 @@ static int bmg160_chip_init(struct bmg160_data *data)
> /* Set Default Range */
> ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
> if (ret < 0) {
> - dev_err(data->dev, "Error writing reg_range\n");
> + dev_err(dev, "Error writing reg_range\n");
> return ret;
> }
> data->dps_range = BMG160_RANGE_500DPS;
>
> ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
> if (ret < 0) {
> - dev_err(data->dev, "Error reading reg_slope_thres\n");
> + dev_err(dev, "Error reading reg_slope_thres\n");
> return ret;
> }
> data->slope_thres = val;
> @@ -228,7 +230,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
> ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
> BMG160_INT1_BIT_OD, 0);
> if (ret < 0) {
> - dev_err(data->dev, "Error updating bits in reg_int_en_1\n");
> + dev_err(dev, "Error updating bits in reg_int_en_1\n");
> return ret;
> }
>
> @@ -236,7 +238,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
> BMG160_INT_MODE_LATCH_INT |
> BMG160_INT_MODE_LATCH_RESET);
> if (ret < 0) {
> - dev_err(data->dev,
> + dev_err(dev,
> "Error writing reg_motion_intr\n");
> return ret;
> }
> @@ -247,20 +249,21 @@ static int bmg160_chip_init(struct bmg160_data *data)
> static int bmg160_set_power_state(struct bmg160_data *data, bool on)
> {
> #ifdef CONFIG_PM
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
>
> if (on)
> - ret = pm_runtime_get_sync(data->dev);
> + ret = pm_runtime_get_sync(dev);
> else {
> - pm_runtime_mark_last_busy(data->dev);
> - ret = pm_runtime_put_autosuspend(data->dev);
> + pm_runtime_mark_last_busy(dev);
> + ret = pm_runtime_put_autosuspend(dev);
> }
>
> if (ret < 0) {
> - dev_err(data->dev,
> - "Failed: bmg160_set_power_state for %d\n", on);
> + dev_err(dev, "Failed: bmg160_set_power_state for %d\n", on);
> +
> if (on)
> - pm_runtime_put_noidle(data->dev);
> + pm_runtime_put_noidle(dev);
>
> return ret;
> }
> @@ -272,6 +275,7 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on)
> static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> bool status)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
>
> /* Enable/Disable INT_MAP0 mapping */
> @@ -279,7 +283,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> BMG160_INT_MAP_0_BIT_ANY,
> (status ? BMG160_INT_MAP_0_BIT_ANY : 0));
> if (ret < 0) {
> - dev_err(data->dev, "Error updating bits reg_int_map0\n");
> + dev_err(dev, "Error updating bits reg_int_map0\n");
> return ret;
> }
>
> @@ -289,8 +293,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
> data->slope_thres);
> if (ret < 0) {
> - dev_err(data->dev,
> - "Error writing reg_slope_thres\n");
> + dev_err(dev, "Error writing reg_slope_thres\n");
> return ret;
> }
>
> @@ -298,8 +301,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
> BMG160_INT_MOTION_Z);
> if (ret < 0) {
> - dev_err(data->dev,
> - "Error writing reg_motion_intr\n");
> + dev_err(dev, "Error writing reg_motion_intr\n");
> return ret;
> }
>
> @@ -314,8 +316,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> BMG160_INT_MODE_LATCH_INT |
> BMG160_INT_MODE_LATCH_RESET);
> if (ret < 0) {
> - dev_err(data->dev,
> - "Error writing reg_rst_latch\n");
> + dev_err(dev, "Error writing reg_rst_latch\n");
> return ret;
> }
> }
> @@ -328,7 +329,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> }
>
> if (ret < 0) {
> - dev_err(data->dev, "Error writing reg_int_en0\n");
> + dev_err(dev, "Error writing reg_int_en0\n");
> return ret;
> }
>
> @@ -338,6 +339,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
> bool status)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
>
> /* Enable/Disable INT_MAP1 mapping */
> @@ -345,7 +347,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
> BMG160_INT_MAP_1_BIT_NEW_DATA,
> (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
> if (ret < 0) {
> - dev_err(data->dev, "Error updating bits in reg_int_map1\n");
> + dev_err(dev, "Error updating bits in reg_int_map1\n");
> return ret;
> }
>
> @@ -354,9 +356,8 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
> BMG160_INT_MODE_NON_LATCH_INT |
> BMG160_INT_MODE_LATCH_RESET);
> if (ret < 0) {
> - dev_err(data->dev,
> - "Error writing reg_rst_latch\n");
> - return ret;
> + dev_err(dev, "Error writing reg_rst_latch\n");
> + return ret;
> }
>
> ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
> @@ -368,16 +369,15 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
> BMG160_INT_MODE_LATCH_INT |
> BMG160_INT_MODE_LATCH_RESET);
> if (ret < 0) {
> - dev_err(data->dev,
> - "Error writing reg_rst_latch\n");
> - return ret;
> + dev_err(dev, "Error writing reg_rst_latch\n");
> + return ret;
> }
>
> ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
> }
>
> if (ret < 0) {
> - dev_err(data->dev, "Error writing reg_int_en0\n");
> + dev_err(dev, "Error writing reg_int_en0\n");
> return ret;
> }
>
> @@ -400,6 +400,7 @@ static int bmg160_get_bw(struct bmg160_data *data, int *val)
>
> static int bmg160_set_scale(struct bmg160_data *data, int val)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret, i;
>
> for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
> @@ -407,8 +408,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
> ret = regmap_write(data->regmap, BMG160_REG_RANGE,
> bmg160_scale_table[i].dps_range);
> if (ret < 0) {
> - dev_err(data->dev,
> - "Error writing reg_range\n");
> + dev_err(dev, "Error writing reg_range\n");
> return ret;
> }
> data->dps_range = bmg160_scale_table[i].dps_range;
> @@ -421,6 +421,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
>
> static int bmg160_get_temp(struct bmg160_data *data, int *val)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
> unsigned int raw_val;
>
> @@ -433,7 +434,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
>
> ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
> if (ret < 0) {
> - dev_err(data->dev, "Error reading reg_temp\n");
> + dev_err(dev, "Error reading reg_temp\n");
> bmg160_set_power_state(data, false);
> mutex_unlock(&data->mutex);
> return ret;
> @@ -450,6 +451,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
>
> static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
> {
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
> unsigned int raw_val;
>
> @@ -463,7 +465,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
> ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
> 2);
> if (ret < 0) {
> - dev_err(data->dev, "Error reading axis %d\n", axis);
> + dev_err(dev, "Error reading axis %d\n", axis);
> bmg160_set_power_state(data, false);
> mutex_unlock(&data->mutex);
> return ret;
> @@ -793,6 +795,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig)
> {
> struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> struct bmg160_data *data = iio_priv(indio_dev);
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
>
> /* new data interrupts don't need ack */
> @@ -804,7 +807,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig)
> BMG160_INT_MODE_LATCH_INT |
> BMG160_INT_MODE_LATCH_RESET);
> if (ret < 0) {
> - dev_err(data->dev, "Error writing reg_rst_latch\n");
> + dev_err(dev, "Error writing reg_rst_latch\n");
> return ret;
> }
>
> @@ -864,13 +867,14 @@ static irqreturn_t bmg160_event_handler(int irq, void *private)
> {
> struct iio_dev *indio_dev = private;
> struct bmg160_data *data = iio_priv(indio_dev);
> + struct device *dev = regmap_get_device(data->regmap);
> int ret;
> int dir;
> unsigned int val;
>
> ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
> if (ret < 0) {
> - dev_err(data->dev, "Error reading reg_int_status2\n");
> + dev_err(dev, "Error reading reg_int_status2\n");
> goto ack_intr_status;
> }
>
> @@ -907,8 +911,7 @@ ack_intr_status:
> BMG160_INT_MODE_LATCH_INT |
> BMG160_INT_MODE_LATCH_RESET);
> if (ret < 0)
> - dev_err(data->dev,
> - "Error writing reg_rst_latch\n");
> + dev_err(dev, "Error writing reg_rst_latch\n");
> }
>
> return IRQ_HANDLED;
> @@ -976,7 +979,6 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
>
> data = iio_priv(indio_dev);
> dev_set_drvdata(dev, indio_dev);
> - data->dev = dev;
> data->irq = irq;
> data->regmap = regmap;
>
> @@ -1139,7 +1141,7 @@ static int bmg160_runtime_suspend(struct device *dev)
>
> ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
> if (ret < 0) {
> - dev_err(data->dev, "set mode failed\n");
> + dev_err(dev, "set mode failed\n");
> return -EAGAIN;
> }
>
>

Next message: Jonathan Cameron: "Re: [PATCH 1/2] iio: adc: Indent if statement"
Previous message: Arnd Bergmann: "Re: [Question] reset controlling"
Next in thread: Srinivas Pandruvada: "Re: [PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]