[PATCH V2 09/11] mtd: nand: read ECC algorithm from the new field
From: RafaÅ MiÅecki
Date: Sun Apr 17 2016 - 13:12:58 EST
Now we have all drivers properly setting this new field we can start
using it. For a very short period of time we should support both values:
NAND_ECC_SOFT and NAND_ECC_SOFT_BCH treating them the same. It's because
of_get_nand_ecc_mode may still be setting NAND_ECC_SOFT_BCH.
Signed-off-by: RafaÅ MiÅecki <zajec5@xxxxxxxxx>
---
V2: Move SOFT-related code to separated functions
Add missing checks for SOFT before checking Hamming vs. BCH
---
drivers/mtd/nand/nand_base.c | 116 ++++++++++++++++++++++++++-----------------
1 file changed, 71 insertions(+), 45 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e1f3cf8..d092375 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4079,6 +4079,69 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
}
EXPORT_SYMBOL(nand_scan_ident);
+static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (WARN_ON(ecc->mode != NAND_ECC_SOFT &&
+ ecc->mode != NAND_ECC_SOFT_BCH))
+ return -EINVAL;
+
+ switch (ecc->algo) {
+ case NAND_ECC_HAMMING:
+ ecc->calculate = nand_calculate_ecc;
+ ecc->correct = nand_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->size)
+ ecc->size = 256;
+ ecc->bytes = 3;
+ ecc->strength = 1;
+ return 0;
+ case NAND_ECC_BCH:
+ if (!mtd_nand_has_bch()) {
+ WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ return -EINVAL;
+ }
+ ecc->calculate = nand_bch_calculate_ecc;
+ ecc->correct = nand_bch_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ /*
+ * Board driver should supply ecc.size and ecc.strength
+ * values to select how many bits are correctable.
+ * Otherwise, default to 4 bits for large page devices.
+ */
+ if (!ecc->size && (mtd->oobsize >= 64)) {
+ ecc->size = 512;
+ ecc->strength = 4;
+ }
+
+ /* See nand_bch_init() for details. */
+ ecc->bytes = 0;
+ ecc->priv = nand_bch_init(mtd);
+ if (!ecc->priv) {
+ WARN(1, "BCH ECC initialization failed!\n");
+ return -EINVAL;
+ }
+ return 0;
+ default:
+ WARN(1, "Unsupported ECC algorithm!\n");
+ return -EINVAL;
+ }
+}
+
/*
* Check if the chip configuration meet the datasheet requirements.
@@ -4154,7 +4217,9 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* If no default placement scheme is given, select an appropriate one.
*/
- if (!mtd->ooblayout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
+ if (!mtd->ooblayout &&
+ (ecc->mode == NAND_ECC_SOFT || ecc->mode == NAND_ECC_SOFT_BCH) &&
+ ecc->algo != NAND_ECC_BCH) {
switch (mtd->oobsize) {
case 8:
case 16:
@@ -4248,54 +4313,13 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->algo = NAND_ECC_HAMMING;
case NAND_ECC_SOFT:
- ecc->calculate = nand_calculate_ecc;
- ecc->correct = nand_correct_data;
- ecc->read_page = nand_read_page_swecc;
- ecc->read_subpage = nand_read_subpage;
- ecc->write_page = nand_write_page_swecc;
- ecc->read_page_raw = nand_read_page_raw;
- ecc->write_page_raw = nand_write_page_raw;
- ecc->read_oob = nand_read_oob_std;
- ecc->write_oob = nand_write_oob_std;
- if (!ecc->size)
- ecc->size = 256;
- ecc->bytes = 3;
- ecc->strength = 1;
- break;
-
case NAND_ECC_SOFT_BCH:
- if (!mtd_nand_has_bch()) {
- WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ ret = nand_set_ecc_soft_ops(mtd);
+ if (ret) {
ret = -EINVAL;
goto err_free;
}
- ecc->calculate = nand_bch_calculate_ecc;
- ecc->correct = nand_bch_correct_data;
- ecc->read_page = nand_read_page_swecc;
- ecc->read_subpage = nand_read_subpage;
- ecc->write_page = nand_write_page_swecc;
- ecc->read_page_raw = nand_read_page_raw;
- ecc->write_page_raw = nand_write_page_raw;
- ecc->read_oob = nand_read_oob_std;
- ecc->write_oob = nand_write_oob_std;
- /*
- * Board driver should supply ecc.size and ecc.strength values
- * to select how many bits are correctable. Otherwise, default
- * to 4 bits for large page devices.
- */
- if (!ecc->size && (mtd->oobsize >= 64)) {
- ecc->size = 512;
- ecc->strength = 4;
- }
- /* See nand_bch_init() for details. */
- ecc->bytes = 0;
- ecc->priv = nand_bch_init(mtd);
- if (!ecc->priv) {
- WARN(1, "BCH ECC initialization failed!\n");
- ret = -EINVAL;
- goto err_free;
- }
break;
case NAND_ECC_NONE:
@@ -4478,7 +4502,9 @@ void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
+ if ((chip->ecc.mode == NAND_ECC_SOFT ||
+ chip->ecc.mode == NAND_ECC_SOFT_BCH) &&
+ chip->ecc.algo == NAND_ECC_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
mtd_device_unregister(mtd);
--
1.8.4.5