Re: [PATCH v2 2/3] PCI: imx6: Implement reset sequence for i.MX6+

From: Lucas Stach
Date: Mon Apr 18 2016 - 04:59:25 EST


Am Sonntag, den 17.04.2016, 22:51 -0700 schrieb Andrey Smirnov:
> I.MX6+ has a dedicated bit for reseting PCIe core, which should be used
> instead of a regular reset sequence since using the latter will hang the
> SoC.
>
> This commit is based on c34068d48273e24d392d9a49a38be807954420ed from
> http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> ---
>
> Changes since v1:
>
> - Patchset is rebased against
> https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/host-imx6
>
> - DTS files changes moved into a separate patch
>
> drivers/pci/host/pci-imx6.c | 28 ++++++++++++++++++++++++++--
> include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 1 +
> 2 files changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index c570bbb..834c5b8 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -33,7 +33,8 @@
>
> enum imx6_pcie_variants {
> IMX6Q,
> - IMX6SX
> + IMX6SX,
> + IMX6QP,
> };
>
> struct imx6_pcie {
> @@ -253,6 +254,11 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
> IMX6SX_GPR5_PCIE_BTNRST_RESET,
> IMX6SX_GPR5_PCIE_BTNRST_RESET);
> break;
> + case IMX6QP:
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> + IMX6Q_GPR1_PCIE_SW_RST,
> + IMX6Q_GPR1_PCIE_SW_RST);
> + break;
> case IMX6Q:
> /*
> * If the bootloader already enabled the link we need some special
> @@ -307,6 +313,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
> break;
> + case IMX6QP: /* FALLTHROUGH */
> case IMX6Q:
> /* power up core phy and enable ref clock */
> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> @@ -367,9 +374,22 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
> gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1);
> }
>
> - if (imx6_pcie->variant == IMX6SX)
> + switch (imx6_pcie->variant) {
> + case IMX6SX:
> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
> IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
> + break;
> + case IMX6QP:
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> + IMX6Q_GPR1_PCIE_SW_RST, 0);
> +
> + usleep_range(200, 500);
> + break;
> + case IMX6Q: /* Nothing to do */
> + break;
> + default:
> + BUG();
> + }
>
> return 0;
>
> @@ -601,6 +621,9 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
> if (of_device_is_compatible(pp->dev->of_node,
> "fsl,imx6sx-pcie"))
> imx6_pcie->variant = IMX6SX;
> + else if (of_device_is_compatible(pp->dev->of_node,
> + "fsl,imx6qp-pcie"))
> + imx6_pcie->variant = IMX6QP;
> else
> imx6_pcie->variant = IMX6Q;
>
> @@ -697,6 +720,7 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
> static const struct of_device_id imx6_pcie_of_match[] = {
> { .compatible = "fsl,imx6q-pcie", },
> { .compatible = "fsl,imx6sx-pcie", },
> + { .compatible = "fsl,imx6qp-pcie", },

New DT compatibles must be documented in
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.

Otherwise same comments as on the first patch.

> {},
> };
> MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
> diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> index 238c8db..5b08e3c 100644
> --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
> @@ -95,6 +95,7 @@
> #define IMX6Q_GPR0_DMAREQ_MUX_SEL0_IOMUX BIT(0)
>
> #define IMX6Q_GPR1_PCIE_REQ_MASK (0x3 << 30)
> +#define IMX6Q_GPR1_PCIE_SW_RST BIT(29)
> #define IMX6Q_GPR1_PCIE_EXIT_L1 BIT(28)
> #define IMX6Q_GPR1_PCIE_RDY_L23 BIT(27)
> #define IMX6Q_GPR1_PCIE_ENTER_L1 BIT(26)