[RFC v6 09/10] pci-ioda: Set PCI_BUS_FLAGS_MSI_REMAP for IODA host bridge

[Yongji Xie]

Any IODA host bridge have the capability of IRQ remapping.
So we set PCI_BUS_FLAGS_MSI_REMAP when this kind of host birdge
is detected.

Signed-off-by: Yongji Xie <xyjxie@xxxxxxxxxxxxxxxxxx>
---
 arch/powerpc/platforms/powernv/pci-ioda.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index f90dc04..9557638 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -3080,6 +3080,12 @@ static void pnv_pci_ioda_fixup(void)
 	pnv_npu_ioda_fixup();
 }
 
+int pnv_pci_ioda_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	bridge->bus->bus_flags |= PCI_BUS_FLAGS_MSI_REMAP;
+	return 0;
+}
+
 /*
  * Returns the alignment for I/O or memory windows for P2P
  * bridges. That actually depends on how PEs are segmented.
@@ -3364,6 +3370,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	 */
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 
+	ppc_md.pcibios_root_bridge_prepare = pnv_pci_ioda_root_bridge_prepare;
+
 	if (phb->type == PNV_PHB_NPU)
 		hose->controller_ops = pnv_npu_ioda_controller_ops;
 	else
-- 
1.7.9.5