[PATCH v4 3/4] devicetree: Add ANX7814 SlimPort transmitter binding.
From: Enric Balletbo i Serra
Date: Mon Apr 18 2016 - 07:26:48 EST
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
---
Changes since v3:
- Model v10 as regulator (dvdd10-supply)
- Removed the Acked-by: Rob Herring. Guess I need your ack again if you're agree
with the change.
Changes since v2:
- Add Acked-by: Rob Herring <robh@xxxxxxxxxx>
Changes since v1:
- Rob Herring:
- Rename cable-det-gpios for hpd-gpios as is more standard
- Fix HDMI output for HDMI input
.../devicetree/bindings/video/bridge/anx7814.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
new file mode 100644
index 0000000..b2a22c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
@@ -0,0 +1,40 @@
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible : "analogix,anx7814"
+ - reg : I2C address of the device
+ - interrupt-parent : Should be the phandle of the interrupt controller
+ that services interrupts for this device
+ - interrupts : Should contain the INTP interrupt
+ - hpd-gpios : Which GPIO to use for hpd
+ - pd-gpios : Which GPIO to use for power down
+ - reset-gpios : Which GPIO to use for reset
+
+Optional properties:
+
+ - dvdd10-supply : Regulator for 1.0V digital core power.
+ - Video port for HDMI input, using the DT bindings defined in [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ anx7814: anx7814@38 {
+ compatible = "analogix,anx7814";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
+ hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+ pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+ port {
+ anx7814_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
--
2.1.0