Re: [PATCH v2] tty: msm_serial: remove static clk rate setting in probe

[Andy Gross]

On Mon, Mar 07, 2016 at 02:46:40AM +0000, Srinivas Kandagatla wrote:
> The issue with setting up a fixed clock rate at probe is that it would
> overwrite the console rate set by the bootloader for its console device.
> This would result in serial out corruption or missing log when we system
> is booted with earlycon. This is not a issue if we boot system without
> earlycon.
> 
> This setup is at least not required with the mainline driver, this code
> used to be required because the clk_enable() call would fail if
> clk_set_rate() wasn't called first.
> 
> Originally the issue was noticed on DB410c which is based on APQ8016
> chipset.
> 
> Without this patch the console log with earlycon would look like:
> ...
> [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
> [    0.000000] NR_IRQS:64 nr_irqs:64 0
> ïïïï+HHïï0.699378] console [ttyMSM0] enabled
> [    0.699378] console [ttyMSM0] enabled
> [    0.702003] bootconsole [uart0] disabled
> [    0.702003] bootconsole [uart0] disabled
> ...
> 
> with this patch I can see all the skipped lines on the console
> 
> Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

Acked-by: Andy Gross <andy.gross@xxxxxxxxxx>

Greg,

Can you pick this one up?

Thanks

Andy