[PATCH v2 1/3] i2c: s3c2410: Add missing clock unprepare on probe() error path

[Krzysztof Kozlowski]

If during probe() the s3c24xx_i2c_init() failed, the clock was left in
disabled but prepared state.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>

---

Changes since v1:
1. Add Javier's reviewed-by.
---
 drivers/i2c/busses/i2c-s3c2410.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 362a6de54833..e9658af36f2e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1200,6 +1200,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	clk_disable(i2c->clk);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "I2C controller init failed\n");
+		clk_unprepare(i2c->clk);
 		return ret;
 	}
 	/* find the IRQ for this unit (note, this relies on the init call to
-- 
1.9.1