Re: [PATCH v9 2/3] gpio: dwapb: convert device node to fwnode

From: Jiang Qiu
Date: Thu Apr 21 2016 - 07:34:38 EST


å 2016/4/20 21:04, Andy Shevchenko åé:
> On Wed, Apr 20, 2016 at 10:13 AM, Jiang Qiu <qiujiang@xxxxxxxxxx> wrote:
>> This patch converts device node to fwnode for dwapb driver, so
>> as to provide a unified fwnode for DT and ACPI bindings.
>>
>> Tested-by: Alan Tull <delicious.quinoa@xxxxxxxxx>
>> Acked-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>> Signed-off-by: Jiang Qiu <qiujiang@xxxxxxxxxx>
>> ---
>> drivers/gpio/gpio-dwapb.c | 37 ++++++++++++++++----------------
>> drivers/mfd/intel_quark_i2c_gpio.c | 2 +-
>> include/linux/platform_data/gpio-dwapb.h | 2 +-
>> 3 files changed, 20 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
>> index 772d743..92bc204 100644
>> --- a/drivers/gpio/gpio-dwapb.c
>> +++ b/drivers/gpio/gpio-dwapb.c
>> @@ -22,6 +22,7 @@
>> #include <linux/of_address.h>
>> #include <linux/of_irq.h>
>> #include <linux/platform_device.h>
>> +#include <linux/property.h>
>> #include <linux/spinlock.h>
>> #include <linux/platform_data/gpio-dwapb.h>
>> #include <linux/slab.h>
>> @@ -290,14 +291,14 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
>> struct dwapb_port_property *pp)
>> {
>> struct gpio_chip *gc = &port->gc;
>> - struct device_node *node = pp->node;
>> + struct fwnode_handle *fwnode = pp->fwnode;
>> struct irq_chip_generic *irq_gc = NULL;
>> unsigned int hwirq, ngpio = gc->ngpio;
>> struct irq_chip_type *ct;
>> int err, i;
>>
>> - gpio->domain = irq_domain_add_linear(node, ngpio,
>> - &irq_generic_chip_ops, gpio);
>> + gpio->domain = irq_domain_create_linear(fwnode, ngpio,
>> + &irq_generic_chip_ops, gpio);
>> if (!gpio->domain)
>> return;
>>
>> @@ -415,7 +416,8 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
>> }
>>
>> #ifdef CONFIG_OF_GPIO
>> - port->gc.of_node = pp->node;
>> + port->gc.of_node = is_of_node(pp->fwnode) ?
>> + to_of_node(pp->fwnode) : NULL;
>
> Someone commented on this that it's simple
> âof_node = to_of_node(â);
>
Yes, the to_of_node() function has checked as like above, as follow:

static inline struct device_node *to_of_node(struct fwnode_handle *fwnode)
{
return is_of_node(fwnode) ?
container_of(fwnode, struct device_node, fwnode) : NULL;
}

Next version, I will fixed it.

>> #endif
>> port->gc.ngpio = pp->ngpio;
>> port->gc.base = pp->gpio_base;
>> @@ -447,19 +449,15 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
>> }
>>
>> static struct dwapb_platform_data *
>> -dwapb_gpio_get_pdata_of(struct device *dev)
>> +dwapb_gpio_get_pdata(struct device *dev)
>> {
>> - struct device_node *node, *port_np;
>> + struct fwnode_handle *fwnode;
>> struct dwapb_platform_data *pdata;
>> struct dwapb_port_property *pp;
>> int nports;
>> int i;
>>
>> - node = dev->of_node;
>> - if (!IS_ENABLED(CONFIG_OF_GPIO) || !node)
>> - return ERR_PTR(-ENODEV);
>> -
>> - nports = of_get_child_count(node);
>> + nports = device_get_child_node_count(dev);
>> if (nports == 0)
>> return ERR_PTR(-ENODEV);
>>
>> @@ -474,18 +472,18 @@ dwapb_gpio_get_pdata_of(struct device *dev)
>> pdata->nports = nports;
>>
>> i = 0;
>> - for_each_child_of_node(node, port_np) {
>> + device_for_each_child_node(dev, fwnode) {
>> pp = &pdata->properties[i++];
>> - pp->node = port_np;
>> + pp->fwnode = fwnode;
>>
>> - if (of_property_read_u32(port_np, "reg", &pp->idx) ||
>> + if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
>> pp->idx >= DWAPB_MAX_PORTS) {
>> dev_err(dev,
>> "missing/invalid port index for port%d\n", i);
>> return ERR_PTR(-EINVAL);
>> }
>>
>> - if (of_property_read_u32(port_np, "snps,nr-gpios",
>> + if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
>> &pp->ngpio)) {
>> dev_info(dev,
>> "failed to get number of gpios for port%d\n",
>> @@ -497,9 +495,10 @@ dwapb_gpio_get_pdata_of(struct device *dev)
>> * Only port A can provide interrupts in all configurations of
>> * the IP.
>> */
>> - if (pp->idx == 0 &&
>> - of_property_read_bool(port_np, "interrupt-controller")) {
>> - pp->irq = irq_of_parse_and_map(port_np, 0);
>> + if (dev->of_node && pp->idx == 0 &&
>> + fwnode_property_read_bool(fwnode,
>> + "interrupt-controller")) {
>> + pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
>> if (!pp->irq)
>> dev_warn(dev, "no irq for port%d\n", pp->idx);
>> }
>> @@ -521,7 +520,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
>> struct dwapb_platform_data *pdata = dev_get_platdata(dev);
>>
>> if (!pdata) {
>> - pdata = dwapb_gpio_get_pdata_of(dev);
>> + pdata = dwapb_gpio_get_pdata(dev);
>> if (IS_ERR(pdata))
>> return PTR_ERR(pdata);
>> }
>> diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
>> index a4ef99b..a24b35f 100644
>> --- a/drivers/mfd/intel_quark_i2c_gpio.c
>> +++ b/drivers/mfd/intel_quark_i2c_gpio.c
>> @@ -219,7 +219,7 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
>> return -ENOMEM;
>>
>> /* Set the properties for portA */
>> - pdata->properties->node = NULL;
>> + pdata->properties->fwnode = NULL;
>> pdata->properties->idx = 0;
>> pdata->properties->ngpio = INTEL_QUARK_MFD_NGPIO;
>> pdata->properties->gpio_base = INTEL_QUARK_MFD_GPIO_BASE;
>> diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
>> index 955b579..2dc7f4a 100644
>> --- a/include/linux/platform_data/gpio-dwapb.h
>> +++ b/include/linux/platform_data/gpio-dwapb.h
>> @@ -15,7 +15,7 @@
>> #define GPIO_DW_APB_H
>>
>> struct dwapb_port_property {
>> - struct device_node *node;
>> + struct fwnode_handle *fwnode;
>> unsigned int idx;
>> unsigned int ngpio;
>> unsigned int gpio_base;
>> --
>> 1.9.1
>>
>
>
>